3d testing with QX9650@5Ghz under SS

[nachthymnen]

Start to test my new QX9650 under my 1HP SS in 3d bench.
This morning only 3d'01 and 3d'03:rolleyes:
Tomorrow '05 and '06:D

SETUP:
DIMASTECH EVO BEAST 1HP
Yorkfield QX9650 L639A664
Asus Maximus Formula SE(Bios 802)
2X1GB Ballistix PC8500
Topower 750W
MSI 8800Ultra liquidcooled
WIN XP+SP2
Maxtor 80GB

http://www.pctunerup.com/up/results/_200711/20071124211201_Immagine010.jpg

http://www.pctunerup.com/up/results/_200711/20071124211213_Immagine009.jpg

http://www.pctunerup.com/up/results/_200711/20071126101609_55785.jpg
http://service.futuremark.com/compare?2k3=5619911

Bad Car Low:(
http://www.pctunerup.com/up/results/_200711/20071126101614_90878.jpg
http://service.futuremark.com/compare?2k1=9293250

[dpa]

get yourself a gfx tube nachthymnen, we want DICE/Ln2 results!! :D

good benching there, good luck with taking the vga under sub zero ;)

[nachthymnen]

get yourself a gfx tube nachthymnen, we want DICE/Ln2 results!! :D

good benching there, good luck with taking the vga under sub zero ;)

Tks, yes I'm really thinking about to buy a DIce tube for my Ultra:D
Maybe 95/96k is possible:)
In the next days I'll test the Ultra under my 1HP phase and cpu liquidcooled:up:

What a sadness...my EX dual cascade selled 1 years ago:(
http://img525.imageshack.us/img525/7719/200607190003sj1.jpg
http://img280.imageshack.us/img280/8396/200607160026fp0.jpg

[dpa]

dont regret, buy a new one :D

Get yourself a CPU or GFX pot.. and mount the phase on the cpu or gfx.. then your scores will be great :D

[eva2000]

Nice but did you really need 1.76v CPU PLL for only 416FSB ???

[nachthymnen]

hehe, I'll buy a tube for vga for sure:D

@eva: not for sure, just set high for be sure to close the bench, I haven't test for mouch time my chip:(
Put immediately under phase:D
I'll do some liquidcooling test soon.

3d bench UP:

:eek:
http://www.pctunerup.com/up/results/_200711/20071127082721_287774.jpg

http://www.pctunerup.com/up/results/_200711/20071127082945_56094.jpg
http://service.futuremark.com/compare?2k3=5621113

http://www.pctunerup.com/up/results/_200711/20071127083017_27411.jpg
http://service.futuremark.com/compare?3dm05=3721048

The '06 is just a test, cpu and vga can go mouch higher:D
http://www.pctunerup.com/up/results/_200711/20071127083100_18472.jpg
http://service.futuremark.com/compare?3dm06=3919475

[G H Z]

5GHz benchable on SS! Oh Yeaaah :woot:

not for sure, just set high for be sure to close the bench

Hehe, I never do that :D

[nachthymnen]

5GHz benchable on SS! Oh Yeaaah :woot:



Hehe, I never do that :D


Tks GHZ:)
But I want more MHZ:D

[hipro5]

I MUST admit that you are lucky having such a GOOD RETAIL CPU.....:)

Keep on M8.... ;) :up:

[nachthymnen]

I MUST admit that you are lucky having such a GOOD RETAIL CPU.....:)

Keep on M8.... ;) :up:

Tks Hipro!:worship:
Well' this is probably the best cpu I've used:)
I think that 5060mhz 3d benchable under my phase is more than possible.
But I need very soon a DIce tube for my Ultra:(

[MTP04]

Nice power and results. I would like to see some gfx subzero runs as well. You should be able to get some good power out of that proc even with water.:)

I must say I am tempted more and more to a buy a Yorkfield with results like these.:slobber: But sadly I just cant afford one.:(

[One_Hertz]

Yorkfield QX9650 L639A664


I just got an L639A664 as well. Will do some air testing today...

[nachthymnen]

Nice power and results. I would like to see some gfx subzero runs as well. You should be able to get some good power out of that proc even with water.:)

I must say I am tempted more and more to a buy a Yorkfield with results like these.:slobber: But sadly I just cant afford one.:(

Tks, yes I need a DIce tube for my Ultra for sure.:rolleyes:
Liquidcooling is not sufficent for a v-modded Ultra:shakes:

I just got an L639A664 as well. Will do some air testing today...

I hope is good as mine:D

[nachthymnen]

Some up, not totally happy of the results:rolleyes:

http://www.pctunerup.com/up/results/_200711/20071128102557_pifast18.67.jpg

http://www.pctunerup.com/up/results/_200711/20071128102254_289036.jpg

http://www.pctunerup.com/up/results/_200711/20071128102226_27499.jpg

http://www.pctunerup.com/up/results/_200711/20071128102450_56525.jpg
http://service.futuremark.com/compare?2k3=5622446



This is good:D
http://www.pctunerup.com/up/results/_200711/20071128102236_91839.jpg
http://service.futuremark.com/compare?2k1=9294206

[hipro5]

ARE YOU CRAZY M8?....."Not totally happy" with a CPU that can do under a SS 5GHz+ at THAT low VCore...?.... :p: :D

[nachthymnen]

ARE YOU CRAZY M8?....."Not totally happy" with a CPU that can do under a SS 5GHz+ at THAT low VCore...?.... :p: :D

hehe:rolleyes:
Well ok is not bad at all:D
Ok, is very good:p:
Just, I can't close the '06 over 4935mhz also with 1,74v:(
I've already closed @ 4926 with 1,728v but is very difficult to go over that freq:( :confused:
Tomorrow I'll try the 290k Aquamark, I've already bench @ 5068mhz:)
In 2 weeks I hope to test my Ultra under DIce for some serious bench:)
Till now I've never run a bench with DIce on vga:(
It's time to start:D

[hipro5]

Hmmm.....Did you try CPU's GTLRef at x 0.61 or x 0.63 to see how it does?...:)

[nachthymnen]

Hmmm.....Did you try CPU's GTLRef at x 0.61 or x 0.63 to see how it does?...:)

No:(
Till now I didn't touch the GTLRef.
Tomorrow I'll try:up:
Tks for the suggestion:D
About PLL?
I had set it around 1,74v.
Can I push it at 1,8+?
Only few days that I run the Maximus Formula:(

TKS

[hipro5]

Leave the PLL for Yorks at 1.8V MAX....VFSB at 1.4 - 1.44V.... :)
Hmmm....and Norhtbridge GTL at x 0.67 ....

[nachthymnen]

Leave the PLL for Yorks at 1.8V MAX....VFSB at 1.4 - 1.44V.... :)
Hmmm....and Norhtbridge GTL at x 0.67 ....

Many tks Hipro:)
Tomorrow @ 7AM I'll try:up:

[The0men]

Those are some wicked scores. When you get things sussed and a DIce pot for GFX you will be getting some massive 3d scores, well not that theyre not terrific already, shame about 3dmark 06 though.

[nachthymnen]

Those are some wicked scores. When you get things sussed and a DIce pot for GFX you will be getting some massive 3d scores, well not that theyre not terrific already, shame about 3dmark 06 though.

Many tks:)
I've a very very lucky York:D
Well, in the '06 I must work so mouch for find better setup:(

Some UP:D
Tks Hipro for the suggestions, not push to the limit, just 1 hour of time to bench:(

:eek: :D 6th place single card on HWBot(i can't belive that)
CPU not so far from 5.1Ghz under phase:eek:
http://www.pctunerup.com/up/results/_200711/20071129090451_290796.jpg

Not good, but I have not try to push more volts on the cpu, tomorrow I'll re run with 1,736v:)
http://www.pctunerup.com/up/results/_200711/20071129090846_18489.jpg
http://service.futuremark.com/compare?3dm06=3945187

http://www.pctunerup.com/up/results/_200711/20071129091017_27550.jpg
http://service.futuremark.com/compare?3dm05=3727835

http://www.pctunerup.com/up/results/_200711/20071129091052_56859.jpg
http://service.futuremark.com/compare?2k3=5623804

This QX is a Bulldozzer:D
Can't wait for put my ultra under DIce:)

[nachthymnen]

Only 1 UP today:(
Lost many time with 3d'06...@ 4945 cpu pass the first 2 GT but can't close the cpu test:(
The limit is 4926mhz:(

Aquamark3 @ 5098mhz=291'300:D
http://www.pctunerup.com/up/results/_200711/20071130083328_291300.jpg

[The0men]

I guess because it is using full power of CPU, unlike the other 3dmarks that are only using one core, and aquamark which only goes as fast as the CPU but doesn't stress it as such.

May require more volts to stabalise 3dmark06. But thats certainly being game!

[dinos22]

don't worry mate

CPUs on SS will bench '06 about 100-150MHz under other 3D benches because if CPU test#1 and 2

i only did 4.8GHz but my chip was much worse than yours so hard to judge but with 1.82v load at 4.8Ghz i was getting -42C load on evap in 26-28C ambients so i know the cooler can do it

i benched my CPU past 5GHz in superpi with 1.92v on CPU :shocked: :D damn you hipro it's all your fault :D:D:D::D

[nachthymnen]

don't worry mate

CPUs on SS will bench '06 about 100-150MHz under other 3D benches because if CPU test#1 and 2

i only did 4.8GHz but my chip was much worse than yours so hard to judge but with 1.82v load at 4.8Ghz i was getting -42C load on evap in 26-28C ambients so i know the cooler can do it

i benched my CPU past 5GHz in superpi with 1.92v on CPU :shocked: :D damn you hipro it's all your fault :D:D:D::D

Well I know that the '06 cpu test it's very heavy:D
But I was thinking about 4950was possible:(
I must try again with 1,77v:)
Your SS is with 1HP comprex right?
Mine I think is similar as your, with my Ex 6850 -66 in BIOS with 1,4v:D

Not tested with lower v-core but I think is not bad, just start win @ 401x12 and run the game:D
http://www.pctunerup.com/up/results/_200711/20071130104608_cineb48sec.jpg

[nachthymnen]

I guess because it is using full power of CPU, unlike the other 3dmarks that are only using one core, and aquamark which only goes as fast as the CPU but doesn't stress it as such.

May require more volts to stabalise 3dmark06. But thats certainly being game!

yes for sure, the '06 cpu test it's really heavy:eek:
I'll try again with 1,76/1,77v:D
In the '05 I can bench with 1,74v @ 5088mhz+:eek:

[dinos22]

give it 1.85v mate and you should be benching around 5150MHz :D:D:D and 5Ghz cinebench :D

[The0men]

give it 1.85v mate and you should be benching around 5150MHz :D:D:D and 5Ghz cinebench :D

Reminds me of a quote "what do all men want? MORE"

lol

[nachthymnen]

give it 1.85v mate and you should be benching around 5150MHz :D:D:D and 5Ghz cinebench :D

Uh, 1,85v under phase it's a high voltage:D
I'll try first @ 1,77:D

[cefurkan]

congrats

really amazing scores

[nachthymnen]

congrats

really amazing scores

Tks, I hope to improve it with my new DIce tube for vga very soon:)

[nachthymnen]

Ok, can't push vga over 766 with normal liquid so I must wait the DIce tube:)

My latest UP:

BAD cpu score:( :confused:
http://www.pctunerup.com/up/results/_200712/20071201103856_18528.jpg
http://service.futuremark.com/compare?3dm06=3974714

http://www.pctunerup.com/up/results/_200712/20071201103906_56900.jpg
http://service.futuremark.com/compare?2k3=5626652

BAD CL
http://www.pctunerup.com/up/results/_200712/20071201103923_92142.jpg
http://service.futuremark.com/compare?2k1=9295717

http://www.pctunerup.com/up/results/_200712/20071201103945_292331.jpg

I can bench Aqua with same v-core also @ 5116mhz:eek: :)

[G H Z]

Find some LN2 Nachty, you know you want it :D

[nachthymnen]

Find some LN2 Nachty, you know you want it :D

hehe, I didn't have the permission of my wife for use LN2:(
But Dice yes:D
In 2 weeks I'll put my Ultra under DIce:)

[nachthymnen]

My SS has been selled and now I'm waiting for my new dual cascade with 2 Rotarys:)
But tomorrow I want to test my Ultra under DIce:)
http://www.pctunerup.com/up/results/_200712/th_20071220192256_ultra.jpg (http://www.pctunerup.com/up/image.php?src=_200712/20071220192256_ultra.jpg)

http://www.pctunerup.com/up/results/_200712/th_20071220192313_ultra1.jpg (http://www.pctunerup.com/up/image.php?src=_200712/20071220192313_ultra1.jpg)

http://www.pctunerup.com/up/results/_200712/th_20071220192323_ultra2.jpg (http://www.pctunerup.com/up/image.php?src=_200712/20071220192323_ultra2.jpg)

Duniek's Alu pot on Ultra and Ybris A.C.S. on Yorkfield:D
Air temps at -6°C probably:up:

[massman]

Hmmm.....Did you try CPU's GTLRef at x 0.61 or x 0.63 to see how it does?...:)

No:(
Till now I didn't touch the GTLRef.
Tomorrow I'll try:up:
Tks for the suggestion:D
About PLL?
I had set it around 1,74v.
Can I push it at 1,8+?
Only few days that I run the Maximus Formula:(

TKS

CPU VTT versus GTL, read this: http://www.thetechrepository.com/showthread.php?t=228 and http://www.thetechrepository.com/showthread.php?t=87

[nachthymnen]

CPU VTT versus GTL, read this: http://www.thetechrepository.com/showthread.php?t=228 and http://www.thetechrepository.com/showthread.php?t=87

Tks Massman:up:

OT: what's happen on HWbot?
I have 3 good 3d marks to up but the site is down:(
Tks:D

[massman]

Some server problems, I'm afraid. 120k results is A LOT, we'll upgrade soon, I hope :)

[nachthymnen]

Some server problems, I'm afraid. 120k results is A LOT, we'll upgrade soon, I hope :)

Wow:eek:
120k is a huge numer of results!:eek:
Tks for the info:up:

[massman]

Okay, should be back up :)