PDA

View Full Version : Enzo Ultra-X

Seer
10-21-2007, 01:01 PM
Right now I currently have the TRUE 120 and want to get the Enzo for the hell of it I guess. lol. Just wondering if anyone has any real experience with both and which one you found the best of the two. I was also wondering If anyone has the Enzo in a push-pull config as I've read about it, but never seen anyone actually using it. thanks!

My temps with my TRUE for you wondering
Currently running my E6550 @ 1.30v 3254MHz
Ambient 26c~
Idle 28c-31c
load 39c-41c
Addy
10-21-2007, 01:54 PM
I ran both with an e6600 and I don’t have my notes of the temps but my experience was the Enzo running about 4-6c higher across the board…pretty typical I think if you look around.
Vapor
10-21-2007, 02:31 PM
How would one do push-pull on an Enzo?
Seer
10-21-2007, 02:35 PM
I read somewhere that you can get long bolts and run them all the way down. Or maybe zip ties? lol
Vapor
10-21-2007, 04:54 PM
But you'll have a fan almost flush with the board, will it fit? Even then, will airflow even improve?
ChaosMinionX
10-21-2007, 07:34 PM
How would one do push-pull on an Enzo?

Its doable, drill holes to mount screws in on the bottom and get some nice threaded screws to tap the metal nicely.. More than enough room to mount a 120x25mm there... I had actually pondered doing it myself before I got a TRUE/ I believe the results wouldnt have been much maybe 1-2C if that, since using a 220CFM Delta and a Thermaltake (said it was 80CFM but I think its like 60 something) didnt really yield any difference in temperature, only a difference in audio :)
Seer
10-21-2007, 10:47 PM
How's that Thermaltake A2018, Chaos? I was debating about getting that, but got the Silverstone FM122 instead.
ChaosMinionX
10-22-2007, 12:03 AM
How's that Thermaltake A2018, Chaos? I was debating about getting that, but got the Silverstone FM122 instead.

Personally.... They are my favorite fans, 1 because they are LED, 2 because they have good airflow to dB IMO. I currently use 2 of them on my TRUE in push/pull and love them. In all the LED fans I have tested, they have the best CFM, most other LED are quiet and wussy :up:

EDIT: I own the full range 80mm 92mm 120mm (A2016, A2017, A2018) and they are all fantastic fans, though the 80mms at max are like deltas, but dont move as much.

I used to use SS FM121's, then just went back to all LED when I got my Stacker830.
Ar3s
10-22-2007, 01:05 AM
Looks like they renamed it Enzotech Extreme-X.
Seer
10-22-2007, 08:50 AM
Looks like they renamed it Enzotech Extreme-X.

orly?
Spawne32
10-22-2007, 09:08 AM
Looks like they renamed it Enzotech Extreme-X.

you are correct sir :up:
Seer
10-22-2007, 09:25 AM
interesting! looks like they changed the name on the heat sink as well! wonder if they made any changes to it.

http://www.enzotechnology.com/extreme_x.htm

Edit: looks like they put a stronger fan on there. 98.6CFM 2500RPM
Spawne32
10-22-2007, 10:46 AM
interesting! looks like they changed the name on the heat sink as well! wonder if they made any changes to it.

http://www.enzotechnology.com/extreme_x.htm

Edit: looks like they put a stronger fan on there. 98.6CFM 2500RPM

Well i know why they changed the name but apparently they did change the fan, but when i do a model # search it comes up with an ADDA fan instead of delta.
ChaosMinionX
10-22-2007, 11:01 AM
Mmmm spawne you talkin to anyone at Enzo, I have been trying to find their new Air sinks, but nobody has em.
Spawne32
10-22-2007, 11:02 AM
Mmmm spawne you talkin to anyone at Enzo?

Not exactly :D
ChaosMinionX
10-22-2007, 11:04 AM
Not exactly :D

Oh? :)

New stuff on the horizon I hear :up:

I really like their remakes of the their sinks with fans, and the shortened GPU sinks.
Spawne32
10-22-2007, 11:06 AM
Oh? :)

New stuff on the horizon I hear :up:

I really like their remakes of the their sinks with fans, and the shortened GPU sinks.

You are putting in a good word for me i hope?
ChaosMinionX
10-22-2007, 11:56 AM
You are putting in a good word for me i hope?

No terrible words :)
Seer
10-22-2007, 12:22 PM
Oh? :)

New stuff on the horizon I hear :up:

I really like their remakes of the their sinks with fans, and the shortened GPU sinks.

New stuff?? Maybe I should hold out on the Extreme-X and see what new products come out:D
ChaosMinionX
10-22-2007, 05:04 PM
New stuff?? Maybe I should hold out on the Extreme-X and see what new products come out:D

Its just a rumor :)
Ar3s
10-22-2007, 08:57 PM
http://www.frozencpu.com/products/5516/cpu-enz-01/Enzotech_Extreme-X_120mm_Fan_Quad_Heatpipe_Universal_CPU_Cooler_Int el_and_AMD.html?tl=c14s52b111

FrozenCPU...... oh crap out of stock but at least its updated the cooler. Come on petra & sidewinder !
Seer
10-22-2007, 09:37 PM
http://www.frozencpu.com/products/5516/cpu-enz-01/Enzotech_Extreme-X_120mm_Fan_Quad_Heatpipe_Universal_CPU_Cooler_Int el_and_AMD.html?tl=c14s52b111

FrozenCPU...... oh crap out of stock but at least its updated the cooler. Come on petra & sidewinder !

I shot at Petra too :)
That's where I got my TRUE, HR-05s, and a bunch of other stuff at.
Ar3s
10-22-2007, 10:04 PM
I get most of my stuff from there too. When i wanted the enzotech stuff thats where i would go. I bought the ramsinks from them recently sadly enzotech came out with low profiles soon after. Thermalright stuff i used to get from them but now with the local distro for TR war the prices are unbelievable.
Ar3s
10-23-2007, 06:38 AM
Well i know why they changed the name but apparently they did change the fan, but when i do a model # search it comes up with an ADDA fan instead of delta.

pretty sure it is.. same fan found in those thermaltake PSUs
http://Ar3s.fileave.com/ad1212ub-a73gl.jpg
empoy
10-27-2007, 12:53 PM
speaking of new enzotech products, would anyone know when the type-x retention bracket will come out (yeah i know, i'm still stuck with amd lol)? its quite nifty since it will emulate the lg775 retention module
BIKeINSTEIN
10-28-2007, 03:56 PM
speaking of new enzotech products, would anyone know when the type-x retention bracket will come out (yeah i know, i'm still stuck with amd lol)? its quite nifty since it will emulate the lg775 retention module
Are you looking for this? :p:
http://www.enzotechnology.com/typex_k8.htm
I am too- very useful to emulate 775 installation by allowing to turn the Extreme-X by 90degrees. :)
Vapor
10-28-2007, 04:24 PM
They mention something called the T-Rex in that page ;)

http://img266.imageshack.us/img266/3366/picture2mw2.png
Spawne32
10-28-2007, 04:41 PM
;-)
ChaosMinionX
10-28-2007, 05:49 PM
They mention something called the T-Rex in that page ;)


Its better than Jurassic Park 3 too :)
eternaljammer
10-28-2007, 06:41 PM
very nice!
empoy
10-29-2007, 07:55 PM
well i'm looking for the am2 version...what the heck is an enzotech t rex? LOL :rofl:
Spawne32
10-29-2007, 08:05 PM
well i'm looking for the am2 version...what the heck is an enzotech t rex? LOL :rofl:

:D :D
ChaosMinionX
10-29-2007, 08:28 PM
:D :D

He smiles because he has no clue
Spawne32
10-29-2007, 09:07 PM
He smiles because he has no clue

i smile because i know what it supposed to be, bluesclues
ChaosMinionX
10-29-2007, 09:49 PM
What?

These?

http://www.blues-clues-party-supplies-guide.com/images/pawprintfuntoos.jpg