Highest (although safe) Voltage for HyperX 3500

[Hell-Fire]

I run mine at 3.15 when benching and trying to push it far as possible.

I have read where people are running at 3.2 or higher. Can anyone confirm this?

Thx,
Fire

[saaya]

jupp a bucnh of people run it at 3.2 and anything above that is useless appearently since it doesnt improve the clockspeed.

[Tedinde]

I keep mine @ 3.1

[Hell-Fire]

I can hit 230fsb at 2-4-2-2, but not stable enough for 3dmark...although it will do Sandra, and windoze stuff like email, surf web, etc.

Maybe my PSU rails are killing me...?

Doesnt matter what timings I set in bios, things wont post at 233..driving me crazy! :brick:

[Creative]

I used to run ~3.10 thru mine in the IT7 and could achieve 180fsb using the 3:4 divider, thus giving 240mhz @ 2-5-2-2 Enhanced :)

I rekon they have heaps left in them but was cpu limited. And now I cant really utilise them cos my current mobo only gives ~2.75vdimm :(

[Hell-Fire]

I will stick with 2.9-3.15 volts for now...although I have read of people hitting them with 3.25,,,woowza

[mrzee]

Before I went dark side, I had a 2500 on an NF7-S with Hyper X 3500, Prometeia cooled. I ran the Hyper X at 3.2v no problem.
With my Intel, I run it at 3.15v when I'm pushing it and I turn it
down to 2.95v for everyday use. Hyper X definately loves the
voltage, don't be scared to turn it up.

[Hell-Fire]

Otay. Thanks MrZee. It sounds like Geil in that respect...likey da volts.

[OPPAINTER]

I run mine at 3.1V

OPP

[Hell-Fire]

Thx OPP...have to go with the advice from the man himself. :worship:

[Hell-Fire]

Hey there PC ICE

Thanks again for help with the psu mod action. :hehe:

[Mr.x3m]

3.35V corsair pc3500

[Hell-Fire]

3.35V :frag:

[sandman]

wasn't macci running his HyperX pc 3000 at like 3.6V or something crazy like that?

[Hell-Fire]

pfffffffffffffft....

My HyperX 3500 will barely do 200fsb, and I have to throttle the cpu back to 9.5multi (1900mhz). And before ya ask, my 2500+ will do 2250 easily during benching...

It will do 230fsb at 2-2-2-4 timings fine,,except for 3dmark and games. Runs Sandra fine as well as everytihng else...maybe some more burn in time is needed..?

If I do any multi above 9.5,,,crashes 3dmark after minute or 2! :cussing:

What I have been forced to do to get a decent 3dmark run is 182 x 12.5 (2275mhz)...which is about 14.5k on my Ti4200.

I have tried all the damned voltage changes I can think of so far...had it at 2.7 (suggested setting for it to do 217 @ 2-3-3-7), up to 3.25,,,nothing helped. Well, it would only do 182 not long ago period for a 3dmark run..so maybe she is still breaking in??

I also need to redo my VDD mod for my MoBo.