A little question to OPPAINTER

[WizardB]

Hi, thanks for the quick answer on my post about which memory modules to use on IC7-G, I will use 4x 256 mb ocz pc4000 gold, since you had success with 4 modules :)
but I'm a bit confused about some memory settings

I've heard about the bug in IC7-G if you use By Spd for memory settings, so I will set the timings manually, something like:
2.5 4 4 7 for 4000 gold

So now to the stuff i'm NOT sure about:

Game Accelerator =
Refresh Cycle Time =
Read Delay(tRD) =
Read Delay Adjust(tRDA) =
Command Per Clock(CPC) =

I know I should disable the two at the bottom if I'm running cpu:mem at 5:4, but shall i have them enabled if I run 1:1

and shall I leave Read Delay(tRD) at AUTO?

which settings did you use when you were running 2x 3700 gold and 2x kingston3500 on your IC7-G?

I would be very happy if you could tell me what settings you use for 1:1 and what settings for 5:4 :)

[OPPAINTER]

I use them all at auto, with my Kingston, with OCZ, or when useing both together. The CPC and all that other stuff doesn't do anything for me.

As far as the Game thing, I just got into Windows the First time ever useing somthing other then auto:D I'm useing Turbo, but this is at 200 FSB, probably the first time I have been at 200 FSB. I'm going to see what these game settings do and how High I can take them.

OPP

[Major]

Welcome to Xtreme forums WizardB !!!! Glad to see you here !;)


I'm no Opp ! :D

But I have played around with the game settings some, with my 3.0c and a lower fsb of 260mhz @ 5:4 the settings all worked fine in Auto, and I didn't have any stablility problems. But when OCing my 2.4c with higher fsb of 290-300 @ 5:4 the settings had a very pronounced affect on stablility and were pretty finiky.

This is what I'm running now with my 2.4c, this allowed for the hightest fsb OC.

Game Accelerator = Auto
Refresh Cycle Time = Normal
Read Delay(tRD) = Auto
Read Delay Adjust(tRDA) = Disabled
Command Per Clock(CPC) = Disabled

you can find so other peoples results in this thread :

http://www.xtremesystems.org/forums/showthread.php?s=&threadid=15393

[ryanpgroovy]

Gold 3700 can do 2-3-6-3 @ 466 2.5 above it maybe to 500 and 3-4-8-4 from around 500 up

some people get higher

[WizardB]

Thanks!, gonna try that settings as soon as my ocz modules arrives, probably within a week :)