tweaking 3dm06 for 20k

[justin_c]

Hopefully some 3dm06 pros can help me out here

http://service.futuremark.com/compare?3dm06=2916399

2x8800 ultras, 680/1181.

19762, 3.95ghz, pcie 120mhz on both slots, auto SPP-MCP clock, 5-5-5-12 sync mode.

7937, 8832, 5969 (SM2, SM3, CPU).

i think i need to do a pencil mod on the GPU and see if i can bump it to 700mhz core. any bios tweaks i could do (gfx).

Which driver should I use for optimum performance (i just used the stable nvidia one, 163.22)?

On another bench at the same CPU freq in Windows xp 64bit (clean install), i got 6180 for CPU score. In 32bit, i get 5969, but the SM2/SM3 scores have increased by over 100.

[andre X_X]

try LOD 3.1, might add some points.

[hipro5]

PCI-E = 135MHz and SPP-MCP = 270MHz with Southbridge voltage = 1.8V and HTT = 1.55 to 1.6V ......ALSO lower the Cas latencies on your rams...:)

[dinos22]

your score is still respectable

those GFX cards can't clock any higher on core?? :confused:

[gandalfone]

PCI-E = 135MHz and SPP-MCP = 270MHz with Southbridge voltage = 1.8V and HTT = 1.55 to 1.6V ......ALSO lower the Cas latencies on your rams...:)


Pciex increase score, Is it only tweak?? bah....:D
With my bfi p35 and 2900....increase 10Mhz=100pt

PS: your score is good score!!!!!!!!!!

[justin_c]

Thanks for the replies.

your score is still respectable

PS: your score is a good score!!!

not enough ;) theres always more :D

Can I pencil the resistor (the one with the orange strike through it)?
http://i241.photobucket.com/albums/ff9/justin2net/1.jpg

Anyways, I am going to up the PCIE (the max i used was 120).

[hipro5]

PCI-E = 135MHz and SPP-MCP = 270MHz with Southbridge voltage = 1.8V and HTT = 1.55 to 1.6V ......ALSO lower the Cas latencies on your rams...:)

I'm quoting myself.....
You'll get what you want by doing as above....:) ;)

[justin_c]

you were right hipro5, once again. 20122 :D thanks to everyone!

http://i241.photobucket.com/albums/ff9/justin2net/20k%203dm06/Grabbed2007-01-050950.10.jpg

[hipro5]

Heh, heh, heh......Nice breaking the 20k ...... for start.......Keep on and play with your rams a bit now...... :D

[F.O.G.N.A.]

PCI-E = 135MHz and SPP-MCP = 270MHz with Southbridge voltage = 1.8V and HTT = 1.55 to 1.6V ......ALSO lower the Cas latencies on your rams...:)

This tweak is only for 8800 ultra or all 8800 series ????

[hipro5]

This tweak is only for 8800 ultra or all 8800 series ????

This is a hardware "tweak" (if you could say that).......and it's for EVERY VGA out there.....;)

[massman]

This is a hardware "tweak" (if you could say that).......and it's for EVERY VGA out there.....;)

That's one which is around ever since videocards were made, no? I remember getting a nice boost with an AGP @ 80Mhz.

[hipro5]

That's one which is around ever since videocards were made, no? I remember getting a nice boost with an AGP @ 80Mhz.

;) :)

[F.O.G.N.A.]

This is a hardware "tweak" (if you could say that).......and it's for EVERY VGA out there.....;)

Thk hipro5 :)