PDA

View Full Version : Abit NF7-S REV.2.0 VDIMM mod?

Riska
07-08-2003, 05:01 PM
Hi i have a problem i have done this mod!
http://www.8rdafaq.com/Abit_nForce2/file.php?file=vdimm_voltage_mod.htm
And now i want to know how to get higer than 3.35volt Vdimm?
Is it possible?
Please help me:confused: :confused:
Riska
07-08-2003, 05:09 PM
Is it because my 3.3volt rail is controling this vdimm chip or what?
Riska
07-09-2003, 05:56 AM
Please can someone help me?
jonspd
07-09-2003, 06:18 AM
Yes if I'am not mistaken your 3.3 rail control's the vdimm voltage. Depending on your psu you might be able to mod you 3.3 rail and get a higher vdimm, higher mem voltage.
Riska
07-09-2003, 07:18 AM
Ok i vil try that!
Thanks.
Riska
07-09-2003, 07:32 AM
Keep up the good work on remembering 911.
It still moves me alot and i am not an american i am from Denmark!
bias_hjorth
07-10-2003, 09:55 AM
Originally posted by Riska
Hi i have a problem i have done this mod!
http://www.8rdafaq.com/Abit_nForce2/file.php?file=vdimm_voltage_mod.htm
And now i want to know how to get higer than 3.35volt Vdimm?
Is it possible?
Please help me:confused: :confused:

hvorfor vil du have højere end 3.3?
vi har forresten også lavet modguiden hvis du har set den :-)
Riska
07-10-2003, 10:22 AM
Fordi jeg gerne vil højere op end 260mhz fsb sync!
bias_hjorth
07-10-2003, 11:14 AM
hehe okay syret ram du har dig.. mine pc3500 hyperX går desværre kun til 240fsb dual..
ligegyldigt hvilke timing! lidt skidt
hvilke bruger du?
twiggy
07-10-2003, 11:22 AM
:( How about english guys.
bias_hjorth
07-10-2003, 11:34 AM
sry.. :-(
just wanted to hear what RAM he uses :-)
Riska
07-10-2003, 12:25 PM
I am using ozc pc3700 !
twiggy
07-10-2003, 01:08 PM
I was just trying to follow the thread guys. :) thanx!
Riska
07-10-2003, 01:28 PM
oK !
bias_hjorth
07-10-2003, 02:03 PM
ahh oki!