v2000 rad placement trouble

[disruptfam]

Hi,

Ok i've ran into a problem my rads don't fit into my v2000 case :(.My idea was to do a setup the same in the on in attachment.I don't want to cut into my new case i wanted to keep everything internal.My dual rad fits but triple does not about 4-5cm's to long.Can anyone help with rad placement in my case.I will replace the triple for a shorter triple if need be.

Cheers

my triple measurements 421mm h 140mm w 45mm d
Double 310mm h 140mm w 45mm d

Post pic soon to give youse an idea of what i'm working with.

[naokaji]

forget it.. atleast not without big modifications....

mount at top in the back? impossible would colide with hw...
mount at top in front? loose 2-3 5.25 slots...
mount at bottom? (2x120mm rad) loose all HDD cages
mount at bottom? (3x120mm rad) have to mount psu on top of its compartment (except you have a psu that is very short, enermax liberty should fit the normal way round) + you still loose all hdd cages....

[disruptfam]

I have removed all the hd cages and the front 120mm fan and my triple still doesnt fit hit's the end of my 850w thermaltake psu.

My dual fits fine in the lower section.I guess my only option's are buying a shorter triple or mounting my current triple on the back via rad box standoff's

cheers

[disruptfam]

this is how i wanted my done...

http://img254.imageshack.us/img254/3651/8458iimg6109internalfh5.jpg

See how both rads fit in the bottom section

[lazy]

i dont see why you wont be able to fit a 240 and an 360 there.. just get a smaller rad

[disruptfam]

yeah i will have to my swap. my 360 is too long and wide.