Q6600 B3 Batch:L702C , FSB WALL at 333MHZ !

[dr-ali]

Setup
Q6600 B3 SL9UM laped
Batch:L702C558
GIGABYTE 965-DQ6 REV 1.0 bios f11 (pencil mod)
patriot PC6400 2GB
600 watt
AIRCOOL laped
CPU-Vcore = 1.35V <---->1.45
Vdimm = 2.15V <----> 2.25V

333*9--->crash
333*8--->crash
333*7--->crash
333*6--->crash

330*9--->stable
330*8--->stable
330*7--->stable
330*6--->stable

the max Core temps at 2880 Mhz (320*9) are good :66 63 66 65
but When i Set FSB to 333Mhz, Multiplier to 9, Memory mulitplier to 2.5 (runs memory at 830Mhz). MCH to +.1, FSB to +.05, PCI-E to +.05, Cpu to 1.3625v or more and vDimm to +.35 (gives me 2.15v) system crashed!!!:mad: so very bad
many pepole says that Q6600-B3 is easy to 3.2 ghz ON AIRCOOL.
i think Batch L702C chip very bad for overclocking ! is it truth?

[Leeghoofd]

Think it's more related to your mobo then to the cpu mate

[vocch]

I am using a DS4 R1.0 @ 3.4GHZ 1.4vcore prime stable....can also use windows @ 3.6ghz.:)