PPInDaHouse
08-15-2007, 02:28 PM
Hi
This week I went to ricky's garage to have some fun with his 3 stage cascade.
I caught in my hardware and started the trip to Setubal.
In the bag I had my P5K Deluxe, my E6420 and celeron D 352 and others things..
In Ricky's house he did the Vcore mod on my board and then we went to his
garage. It was the first time that I saw a cascade (without being in forums).
Setup:
E6420 [L702C554] & Celly D 352 [5646B590] (only 1.75vcore on each)
P5K Deluxe vcore mod
Teamgroup Xtreem PC5300
PCI Card
LC Power Hyperion 700w
Here is my P5K Deluxe insulated
http://img521.imageshack.us/img521/4778/dsc00139ny2.jpg
and here is my E6420 mounted and ready for extreme cold action :D
http://img184.imageshack.us/img184/6072/dsc00140us8.jpg
I dont have the results from E6420 here now, they are on Ricky's HDD (I will post them here)
but I can say that my E6420 did ~4700mhz with 1.75v
I only have 4600mhz validation here
http://valid.x86-secret.com/show_oc.php?id=226439
Now lets try celeron D 352..
Take 2
Chinese cedar mill action :D
This celly did 5400mhz on air/water.
When Ricky saw that this chip is from china he tought that it isnt good :ocx48:
http://img184.imageshack.us/img184/5326/dsc00134hc7.jpg
We started clocking it and..
http://img467.imageshack.us/img467/7153/dsc00143wx9.jpg
It was too hard to reach and validate more than 6800mhz and then we quit trying that. we started running some SPI with celly at 6700mhz (sorry, I forgot the printscreen) and then ricky opened SetFSB after runing some PIs and reach and validate 6810 :)
validation: http://valid.x86-secret.com/show_oc.php?id=226262
Well, the fight for E6420 WR and 7ghz with celeron D 352 will continues
best regards
P.S - Ricky have some more photos, he or me will post them here
This week I went to ricky's garage to have some fun with his 3 stage cascade.
I caught in my hardware and started the trip to Setubal.
In the bag I had my P5K Deluxe, my E6420 and celeron D 352 and others things..
In Ricky's house he did the Vcore mod on my board and then we went to his
garage. It was the first time that I saw a cascade (without being in forums).
Setup:
E6420 [L702C554] & Celly D 352 [5646B590] (only 1.75vcore on each)
P5K Deluxe vcore mod
Teamgroup Xtreem PC5300
PCI Card
LC Power Hyperion 700w
Here is my P5K Deluxe insulated
http://img521.imageshack.us/img521/4778/dsc00139ny2.jpg
and here is my E6420 mounted and ready for extreme cold action :D
http://img184.imageshack.us/img184/6072/dsc00140us8.jpg
I dont have the results from E6420 here now, they are on Ricky's HDD (I will post them here)
but I can say that my E6420 did ~4700mhz with 1.75v
I only have 4600mhz validation here
http://valid.x86-secret.com/show_oc.php?id=226439
Now lets try celeron D 352..
Take 2
Chinese cedar mill action :D
This celly did 5400mhz on air/water.
When Ricky saw that this chip is from china he tought that it isnt good :ocx48:
http://img184.imageshack.us/img184/5326/dsc00134hc7.jpg
We started clocking it and..
http://img467.imageshack.us/img467/7153/dsc00143wx9.jpg
It was too hard to reach and validate more than 6800mhz and then we quit trying that. we started running some SPI with celly at 6700mhz (sorry, I forgot the printscreen) and then ricky opened SetFSB after runing some PIs and reach and validate 6810 :)
validation: http://valid.x86-secret.com/show_oc.php?id=226262
Well, the fight for E6420 WR and 7ghz with celeron D 352 will continues
best regards
P.S - Ricky have some more photos, he or me will post them here