E6850 LN2 Actions @Team Japan

[fredyama]

By TAM

Just quick LN2 benching results before he went to pray his ancestors-- Bon- Festival:D

Time: 9.187s (Super PI / mod1.5XS)
Clock: 5568.0MHz (fsb618.7MHz x9)
CPU: Intel Core2 Duo E6850 (SLA9U / L723A347 / 2L72141 4A22**)
M/B: ASUS P5B DELUXE REV.1.10G (72M0AI8930** / PCB MADE IN CHINA / bios1004)
CPU Cooling: LN2 (kuri-Pro4 + V-TEC ARC Bed Rev.4.0 memesamaSP)
Memory: Team Xtreem PC-9600(DDR2-1200) 1GBx2
VGA: ATI rageXL (PCI)
HDD: IBM DTLA-307020
Power Supply: Zippy-460w
Vcore: 1.94v, Vdimm: 2.65v, Vio: 3.45V
OS: Windows Server 2003
MEM: 1:1, 4-4-4-4-4-25-5-10-5-10-faster (bios)

http://u-san.net/c-board/file/E6850-5568_09s187.gif

http://u-san.net/c-board/file/CPU-Z_E6850-5567.gif

[Gautam]

Very nice work by TAM-san indeed. :clap: It seems like the G0 Conroes might have to be taken seriously for LN2 benching after all.

The P5B Deluxe choice is interesting. Do you know if this was an FSB or CPU limit?

[DMH]

Very good:D maybe the new WR on PI1M may be done on an E6850 instead of a E6700

[Stapler]

Tam's got one hell of a P5B Deluxe, same one used for his sub 9 I assume.

[k|ngp|n]

Nice job on the P5B TAM!
Congratz.

[rra]

Wow thats impressive these cpu,s are really getting scary and that time on that board even more impressive.:)

[Solarfall]

awesome clocks, nicely done mate :toast:..
i hope i will be able to get my e6850 over 5ghz too when i do some benching tomorrow with dice..
btw any pics of the benching setup i just love seeing em ?? :D

[Pedro Rocha]

By TAM

Just quick LN2 benching results before he went to pray his ancestors-- Bon- Festival:D

CPU: Intel Core2 Duo E6850 (SLA9U / L723A347 / 2L72141 4A22




Very nice numbers Tam-san, what can we say more: it's Team Japan :clap: :clap:

Fredyama-san, I'm a bit confused about the description: did Tam use 3 CPUs - 1 L723A347 AND 2 L72141 ??
These results have been obtained with which one??

I'm chasing the golden stepping, when I can find one I may give another try to my good old P5B :p:

"Bon- Festival" = RIP? :confused:

Obrigado/ arigato :D

[T_M]

Wow, unbelievable FSB for these 6850!

[dinos22]

nice work TAM

what does that CPU do on air or water in terms of FSB 1M :) :up:

[over@locker886]

awesome E6850:up:

Great work TAM! , Thank you info Fredyama!;)

[SoF]

woha that's an E6850 from hell I would say :eek:
Awesome chip :slobber:
Nice work TAM, thanks for nfo freddy :toast:

[Leora]

Wow, some awesome results there :up:

[Oliver]

Really good work TAM ;).

Keep pushing it Team Japan :D.

[Monstru]

I am beginning to think that these new 6850 G0's chips are going to beat 6Ghz pretty son. And there is a big chance we will see that happen in Japan first :D

Impressive work!

[fredyama]

TAM would like to convey his thanks to you all:)

The P5B Deluxe choice is interesting. Do you know if this was an FSB or CPU limit?

Just he has not opened any of his P5K M/Bs as he has been too busy lately:D I bet he will try it with P5K soon;)

Tam's got one hell of a P5B Deluxe, same one used for his sub 9 I assume.

Looks like another P5B Deluxe he used this time.
Please refer to his sub9s results in here (http://u-san.net/c-board/c-board.cgi?cmd=one;no=1158;id=)


Fredyama-san, I'm a bit confused about the description: did Tam use 3 CPUs - 1 L723A347 AND 2 L72141 ??
These results have been obtained with which one??

"Bon- Festival" = RIP? :confused:

Obrigado/ arigato :D

He used only one CPU: L723A347=FPO/Batch # & 2L772141/4A22**=Serial/lot #(?) on the black sticker at the bottom of the CPU-- yep, they are too small to read:D

As for Bon-Festival, please refer to here (http://en.wikipedia.org/wiki/Bon_Festival)
Actually, I do not know it well either but holidays:D

what does that CPU do on air or water in terms of FSB 1M :) :up:

Please take a look at his on air results in here (http://u-san.net/c-board/c-board.cgi?cmd=one;no=1214;id=)

Cheers:toast:

[Zannema]

Fredyama.......your E6850 is impressive :eek:
Good Good work :up:

[fredyama]

Fredyama.......your E6850 is impressive :eek:
Good Good work :up:

Thanks but it's not mine, all done by TAM-- have just reported his results;)
I wish I had such an awesome E6850 & also like your E6700:D

[Florent]

Very nice results :up:

[Zannema]

Thanks but it's not mine, all done by TAM-- have just reported his results;)


Ops.......sorry for the error:p:

[jamaika]

Gz TeamJapan :yepp:

[VictorWang]

wow. u are lucky to have such a good G0 E6850, great work

[google]

pictures of the setup?

P.S: very nice E6850 ;-)

[gandalfone]

Great work team japan:clap:

[luihed]

Very nice overclocking Tam-san...

That 1M is very fast, I find the is 6850 slower in 32M, how was your 32M time?

[DEVIL K-ce]

:eek:

What a 6850 :shocked: 5.5GHz on new G0 and only one CPU for test :cool:

Congrats


Martin

[fredyama]

By Hideo (aka Papa)

ModPI 1M WR tied with E6850

Time: 8.797s (Super PI / mod1.5XS)
Clock: 5777.3MHz (fsb641.9MHz x9)
CPU: Intel Core2 Duo E6850 (SLA9U / L720A745 / 2L72065 1A00**)
M/B: ASUS P5K REV.1.02G (75M0ACD453** / PCB MADE IN CHINA/bios0414)
CPU Cooling: LN2 (kuri-Pro4 by TAM +V-TEC ARC Bed Rev3.3 by Vigor)
Memory: A-DATA DDR2-1200+(PC-9600) 1GBx2
VGA: ATI rageXL (PCI)
HDD: Raptor36G
Power Supply: Power Stream520W
Vcore: 1.927V, Vdimm: 2.67V, Vio: 3.50V CPU PLL Voltage2.40V
OS: Windows Server 2003
MEM: 1:1, 4(5)-4-4-4-4-4-25-4-9(10)10-10-4-8-4-4-2 (Memset)

http://u-san.net/c-board/file/8-6.gif

[Gautam]

Impossible!!! Perfection! 642 1:1 4-4-4, nearly 5.8GHz...:eek2:

[fredyama]

Impossible!!! Perfection! 642 1:1 4-4-4, nearly 5.8GHz...:eek2:

CL5, Level10:D
Please take a look at here (http://u-san.net/c-board/c-board.cgi?cmd=one;no=1220;id=)

[elmor]

Wow, close to 5.8ghz SPI 1M. I see you're limited by OVP aswell :eek:

[Zannema]

That is insane clock.........with 6850....and p5k:up:

[Gautam]

CL5, Level10:D
Please take a look at here (http://u-san.net/c-board/c-board.cgi?cmd=one;no=1220;id=)

Ah. Tell Hideo-san I'll lend him this memory if he lends me his CPU. :D

http://www-personal.umich.edu/~gautamb/cas4max.PNG

[boblemagnifique]

By Hideo (aka Papa)

ModPI 1M WR tied with E6850

Time: 8.797s (Super PI / mod1.5XS)
Clock: 5777.3MHz (fsb641.9MHz x9)
CPU: Intel Core2 Duo E6850 (SLA9U / L720A745 / 2L72065 1A00**)
M/B: ASUS P5K REV.1.02G (75M0ACD453** / PCB MADE IN CHINA/bios0414)
CPU Cooling: LN2 (kuri-Pro4 by TAM +V-TEC ARC Bed Rev3.3 by Vigor)
Memory: A-DATA DDR2-1200+(PC-9600) 1GBx2
VGA: ATI rageXL (PCI)
HDD: Raptor36G
Power Supply: Power Stream520W
Vcore: 1.927V, Vdimm: 2.67V, Vio: 3.50V CPU PLL Voltage2.40V
OS: Windows Server 2003
MEM: 1:1, 4(5)-4-4-4-4-4-25-4-9(10)10-10-4-8-4-4-2 (Memset)

http://u-san.net/c-board/file/8-6.gif

E6850 Monster :D

Great Work Hideo-San

Thank Fred-San for the news :clap:

[fredyama]

Ah. Tell Hideo-san I'll lend him this memory if he lends me his CPU. :D

Hahaha, we shall see:D
BTW, below is his CL4/Level9 1:1 @FSB 635.5MHz result;)

http://u-san.net/c-board/file/5719-cl4.gif

[Gautam]

pp=50586...extremely extremely efficient time.

[dinos22]

what a CPU :D

[Johnny Bravo]

and some fine memory!

[dinos22]

and some fine memory!

what about guatams sticks there :shocked: :D

too bad DDR3 absolutely destroys DDR2 in 32M now :D

very surprised not to see japanese guys at it with DDR3 sticks

high FSB CPUs will have a huge advantage benching 32M with DDR3+P35 boards like P5K3 or blitz :up: >>> this CPU is such a gem it's not funny :D

32M superpi MHz???

[Gautam]

too bad DDR3 absolutely destroys DDR2 in 32M now :D



Try telling that to NewBeetle-san (http://www.xtremesystems.org/forums/showpost.php?p=2349375&postcount=1138) :p:

[fredyama]

Thank you so much all:)

That is insane clock.........with 6850....and p5k:up:

E6850 Monster :D
Great Work Hideo-San
Thank Fred-San for the news :clap:

Actually, we owe you greatly that you are the one showed us how P5K vanilla is far out M/B:D
Thanks Aurel-san:toast:

[G H Z]

Nothing missing on that run, crazy clocks, unreal FSB and smokin memory. Great job Hideo! :clap:

[Zannema]

Team japan :bows: :worship: ;)

[Oliver]

Congrats Hideo-San with the new WR.

Really impressive results and FSB.

Keep pushing it ;).

[luihed]

:eek2: :toast: :clap: :worship: :worship: :worship: :worship: :up: :D

[jugeen]

n1 work! :clap: :up:

[Stapler]

Try telling that to NewBeetle-san (http://www.xtremesystems.org/forums/showpost.php?p=2349375&postcount=1138) :p:

It's a nice time, but even Jason went sub 13 without copy waza using DDR3.

[CCUABIDExORxDIE]

awesome work Hideo team japan just seems to keep cranking out the insane cpus. 642x9 is just ridiculous! keep the the world records guys!

[qballe]

impressive clock ;)

[TheKing]

Impressive score Hideo-san! Congrats :up:

What is the Vio voltage? (Sorry for the stupid question ... :p: )


Marco;)

[Zannema]

Have you got any picture for the CPU PLL Voltage vmod?

[Stapler]

Impressive score Hideo-san! Congrats :up:

What is the Vio voltage? (Sorry for the stupid question ... :p: )


Marco;)

3.3v line on PSU

I'm also interested in the CPU PLL voltage mod.

[funkflix]

Awesome resullts! :eek: Congratulation guys! :toast:

Have you got any picture for the CPU PLL Voltage vmod?

I'm very interested in that, too! Thanks in advance.

[fredyama]

Thanks a lot all:)

@Zannema, Stapler & funkflix

Please see Hideo's CPU PLL Voltage vmod here (http://u-san.net/c-board/c-board.cgi?cmd=one;no=1199;id=).

Cheers:toast:

[funkflix]

Thanks a lot all:)

@Zannema, Stapler & funkflix

Please see Hideo's CPU PLL Voltage vmod here (http://u-san.net/c-board/c-board.cgi?cmd=one;no=1199;id=).

Cheers:toast:

Thanks mate! :up:

[dinos22]

too bad DDR3 absolutely destroys DDR2 in 32M now :D


Try telling that to NewBeetle-san (http://www.xtremesystems.org/forums/showpost.php?p=2349375&postcount=1138) :p:
i am scared to think how good his time would be if he had Micron DDR3 stuff

with only 850MHz 7-6-5-15 he would easily beat that time >>> also high FSB for the first time i know affects SuperPi from my recent testing with Asus P5KC hybrid DDR2/3 board so a CPU capable of astronomical FSB tweaked well would be amazing too [EDIT] errr 600MHz FSB on that run....well well well :D i think i know why that was quick >>> it may not be just P35+DDR3 then hehehe

now with Micron RAM 850 at those timings is nothing.....people will bench past 900 easily :D :up: it will be amazing what it will do for superpi :D

[Stapler]

850 6-5-5-15 is very doable, check this SS (not mine, don't pay attention to the SP2004 clock it's not reporting right):

http://www.ocxtreme.org/opb/prime95end28hours.jpg

[dinos22]

nice sticks OPB has for sure

well basically what i'm saying is that DDR3 is taking off where DDR2 left off IN 32M

in 1M times are still slow so 6-5-5- might actually be more beneficial there because of tight timings :)

[fredyama]

@dinos22 & Stapler

We appreciate your suggestion but this thread is not for if and what results.
Perhaps, you guys want to continue posting your views in more appropriate thread where the actual DDR3 32M PI results reside.

Thank you.

[Misko]

out of breath :clap: :clap: :clap:

[Zannema]

Thanks a lot all:)

@Zannema, Stapler & funkflix

Please see Hideo's CPU PLL Voltage vmod here (http://u-san.net/c-board/c-board.cgi?cmd=one;no=1199;id=).

Cheers:toast:

Thank fredyama-san;)

[dinos22]

@dinos22 & Stapler

We appreciate your suggestion but this thread is not for if and what results.
Perhaps, you guys want to continue posting your views in more appropriate thread where the actual DDR3 32M PI results reside.

Thank you.

yes you are right :up:

[over@locker886]

Congrats Hideo-san, very good work!!:clap:

[asterix34]

Very nice Mhz great fsb ! Congratulations 'team japan' san.

[Felipe]

Congratulations team japan

[Stapler]

@dinos22 & Stapler

We appreciate your suggestion but this thread is not for if and what results.
Perhaps, you guys want to continue posting your views in more appropriate thread where the actual DDR3 32M PI results reside.

Thank you.

Sorry, for the off topic, didn't meant to clutter Hideo's thread.

Thank you for sharing the CPU PLL mod, unfortunately my P5K came DOA.

[eva2000]

By TAM

Just quick LN2 benching results before he went to pray his ancestors-- Bon- Festival:D

Time: 9.187s (Super PI / mod1.5XS)
Clock: 5568.0MHz (fsb618.7MHz x9)
CPU: Intel Core2 Duo E6850 (SLA9U / L723A347 / 2L72141 4A22**)
M/B: ASUS P5B DELUXE REV.1.10G (72M0AI8930** / PCB MADE IN CHINA / bios1004)
CPU Cooling: LN2 (kuri-Pro4 + V-TEC ARC Bed Rev.4.0 memesamaSP)
Memory: Team Xtreem PC-9600(DDR2-1200) 1GBx2
VGA: ATI rageXL (PCI)
HDD: IBM DTLA-307020
Power Supply: Zippy-460w
Vcore: 1.94v, Vdimm: 2.65v, Vio: 3.45V
OS: Windows Server 2003
MEM: 1:1, 4-4-4-4-4-25-5-10-5-10-faster (bios)

http://u-san.net/c-board/file/E6850-5568_09s187.gif

http://u-san.net/c-board/file/CPU-Z_E6850-5567.gif

congrats :up:

Just got my first E6850 and same batch as yours

E6850 SLA9U
FPO/Batch: L723A347
Version: D97262-001
Pack Date: 07/27/07

:D

[Zannema]

@ fredyama: Have you got a CPU PLL Voltage vmod for p5k-e?;)

[fredyama]

@ fredyama: Have you got a CPU PLL Voltage vmod for p5k-e?;)

I believe this (http://u-san.net/c-board/c-board.cgi?cmd=one;no=1189;id=) is the one Hideo uploaded for P5K-E.
Please make sure it with your M/B though;)

[BeardyMan]

Nice cpu fredyama , i believe have the same :D
4.1ghz on air 1.55V :D

[Zannema]

I believe this (http://u-san.net/c-board/c-board.cgi?cmd=one;no=1189;id=) is the one Hideo uploaded for P5K-E.
Please make sure it with your M/B though;)


Thank you fredyama-san:up:

[BeardyMan]

@ fredyama
MEM: 1:1, 4(5)-4-4-4-4-4-25-4-9(10)10-10-4-8-4-4-2 (Memset)


I believe this is T2?
Could you try with bios 0603, how far you can go on T1?:D
perhaps not that far, but i think you can still go far :D

greetz!

[fredyama]

Thanks again all for your compliments:)

@dinos22 & Stapler

Thank you for your kind understanding:up:

congrats :up:
Just got my first E6850 and same batch as yours
E6850 SLA9U
FPO/Batch: L723A347
Version: D97262-001
Pack Date: 07/27/07:D

Thank you so much eva2000-san:)
As NewBeetle pointed out, how high FSB we can get out from it at 1.35Vcore x6 seems to be a key factor under extreme cooling:D ;)
As you know, not all L723A347 is as good as TAM's so you should grab them all while they are available:D

Thank you fredyama-san:up:

You are most welcome, Zannema-san:)
Wish you best of luck with your awesome E6700:toast:

Here are some more results-- though mediocre one after seeing that of TAM & Hideo:D

By picoo

Super PI Mod 1M: 9.281s @5469.5MHz （FSB 607.7×9.0）
http://wind.ap.teacup.com/picoo/img/1187398045.jpg

(Setup)
CPU:Memory＝1:1
Ratio CMOS Setting : x9
FSB Frequency : 560MHz@boot
PCIE Frequency : 100
DRAM Frequency : DDR2-1160MHz
DRAM Command Rate : Auto
DRAM Timing Control ～ : M（4-4-4-4～A）-D、E-1-1000mV、D-D

CPU Voltage : 1.800V（Actual）
CPU Voltage Danper : Enabled
CPU PLL Voltage : 1.80V
DRAM Voltage : 2.600V（Actual)
FSB Termination Voltage : 1.50V（BIOS）
North Bridge Voltage : 1.80V（Actual）

CPU：Core 2 Duo E6850（L723A317）
M/B： ASUS P5K Deluxe/WiFi-AP（BIOS:0501）Vcore・Vdimm・Vnb mod、N-Chipset under watercooling

CPU cooling: LN2
Chipset cooling: Water temp 12℃（assisted by airconditionner）
Northbridge cooling: Alphacool SNB-N Silver Northbridge
PUMP / Alphacool AP900 12V + Voltage Module12-24V AP step-up adaptor
RADIATOR / Alphacool NexXxoS XtremeⅢ/120ｘ38ｍｍ(2000rpm)ｘ3
RESERVOIR / Mitron Interlink WT-TB-B, TUBE / innovatek(500898) 10/8mm
Southbridge cooling: On air with heat sink from P5B-Deluxe

Memory： Team Xtreem PC2-9600(DDR2-1200) CL5 1GBx2 with Heatsink:Thermalright HR-07 X2
VGA: Matrox MillenniumG450/D32PDV（PCI）
HDD: HDS728080PLA380 80GB
POW1: OCZ Power Stream Power Supply 520W（for Water cooling）
POW2: Zippy-720PE（for system）
OS: Server2003 Enterprise Edition
BED: V-TEC ARC Bed Rev.5.0 Professional by Vigor
Copper pot: kuri-Pro4 by TAM
System Rack: B-ONE x2
Thermal grease: ArcticSilver5


By fredyama

modPI 1.5 XS 1M: 9.265s @5462.7MHz (FSB607.0MHz x 9)
http://premium1.uploadit.org/fredyama//P5K_2-E6850-L723A943-modPI1M9.265s.gif

(Setup)
M/B: ASUS P5K#2 75M0AC298*** (Bios 0414, Vcore mod, Vdimm/Vcpu pll clip mod & Vdroop Pencil mod)
M/B Bed: V-TEC ARC Bed Rev.3.32 by Vigor
CPU: Core 2 Duo E6850 L723A943/2L72356/7A1***
CPU Cooling: LN2　KuriPro4 by TAM
Chipset Cooling: Normal
Memory: Team Xtreem PC2-9600#2 1GB x 2
VGA: ATI 3D Rage PCI 8MB
HDD: IBM DTLA-307030 PATA 30.7GB
Power Supply: OCZ PowerStream 520W
Vcore: 1.906～8V(Actual), Vdimm: 2.677V(Actual), Vnb: 1.730(Actual), Vcpu pll: 2.405V(Actual), Vio: 3.488V(Bios), Others: Max Bios value
OS: Windows Server 2003
MEM: 1:1, Bios setting: 4-4-4-4-4-4-25-4-4-4-E-A-A
Others: FSB555@boot, SetFsb2.0.b.15f, MemSet3.3, ERAM2.11, AutoGear, MAXMEM=600, Ceramique by Arctic Silver

Cheers:toast:　

[Gautam]

Very nice speed and time by picoo. :up:

And very very well done SuperPi time by yourself, Fred-san. :clap: It's a pleasure to finally see you back into action. :D It seems your E6850 hunt has already been quite profitable.

[qballe]

nice 6850s :D

[Pete]

Flipping heck. Just got a E6850 thats doing 4.1 @ 1.5 on water. I think user had problems with mobo. Im awaiting a new mobo to see what i can get it to do on water!

[fredyama]

@ fredyama
MEM: 1:1, 4(5)-4-4-4-4-4-25-4-9(10)10-10-4-8-4-4-2 (Memset)
I believe this is T2?
Could you try with bios 0603, how far you can go on T1?:D
perhaps not that far, but i think you can still go far :D greetz!

A bit odd question & suggestion:confused:
Please do not tell me you are from LN2 industry:D

Very nice speed and time by picoo. :up:
And very very well done SuperPi time by yourself, Fred-san. :clap: It's a pleasure to finally see you back into action. :D It seems your E6850 hunt has already been quite profitable.

Thank you Gautum-san:)
After seeing these awesome results by TAM & Hideo, decided to jump on the wagon:D
Bad thing is that I cannot get the stepping inf from e-tailers unlike Akiba- so purely the luck of the draw here;)

nice 6850s :D
Thank you gballe-san. Hope you will get a nice one in Italy:)

Flipping heck. Just got a E6850 thats doing 4.1 @ 1.5 on water. I think user had problems with mobo. Im awaiting a new mobo to see what i can get it to do on water!
Sorry, I have no idea how good they are on water...anyway good luck next time:D

[Zannema]

Congratulation fredyama-san, i like your 6850 :up:

[Pt1t]

(Setup)
M/B: ASUS P5K#2 75M0AC298*** (Bios 0414, Vcore mod, Vdimm/Vcpu pll clip mod & Vdroop Pencil mod)
M/B Bed: V-TEC ARC Bed Rev.3.32 by Vigor
CPU: Core 2 Duo E6850 L737A943/2L72356/7A1***
CPU Cooling: LN2　KuriPro4 by TAM
Chipset Cooling: Normal
Memory: Team Xtreem PC2-9600#2 1GB x 2
VGA: ATI 3D Rage PCI 8MB
HDD: IBM DTLA-307030 PATA 30.7GB
Power Supply: OCZ PowerStream 520W
Vcore: 1.906～8V(Actual), Vdimm: 2.677V(Actual), Vnb: 1.730(Actual), Vcpu pll: 2.405V(Actual), Vio: 3.488V(Bios), Others: Max Bios value
OS: Windows Server 2003
MEM: 1:1, Bios setting: 4-4-4-4-4-4-25-4-4-4-E-A-A
Others: FSB555@boot, SetFsb2.0.b.15f, MemSet3.3, ERAM2.11, AutoGear, MAXMEM=600, Ceramique by Arctic Silver

Cheers:toast:　

Hello,

You mean L727A :D Not 37 !

do you have any idea of Max fsb of your cpu on air ? and the one of hideo ?

Regards


Pt1t

[fredyama]

Hello,
You mean L727A :D Not 37 !
do you have any idea of Max fsb of your cpu on air ? and the one of hideo ?
Regards Pt1t

Oops, you are right--it is actually L723 . Thanks for your soptting a typo:up:
As for max fsb on air: TAM=565.3MHz, Hideo=588MHz, picoo=575Mhz, me=562.4Mhz
Please note it is just an indication, not guaranteed:D

[BeardyMan]

A bit odd question & suggestion:confused:
Please do not tell me you are from LN2 industry:D



Thank you Gautum-san:)
After seeing these awesome results by TAM & Hideo, decided to jump on the wagon:D
Bad thing is that I cannot get the stepping inf from e-tailers unlike Akiba- so purely the luck of the draw here;)


Thank you gballe-san. Hope you will get a nice one in Italy:)


Sorry, I have no idea how good they are on water...anyway good luck next time:D
DRAM Command Rate : Auto
-->T2 or T1
I should have been more specific my apoligize ;)


Try T1 :D

[Gautam]

I think what fred-san is insinuating is that he'd love to see you do ~610MHz 1:1 at 1T. ;)

[BeardyMan]

I think what fred-san is insinuating is that he'd love to see you do ~610MHz 1:1 at 1T. ;)

You know gautam for some strange reason i believe it's possible with some Hipro maximizer loving :D

[fredyama]

I think what fred-san is insinuating is that he'd love to see you do ~610MHz 1:1 at 1T. ;)

Thanks again Gautam-san to show what I really wanted to say:rofl:
Wonder where he is really from;)

[BeardyMan]

did some quick testing, at 2.25V my crucials does 530mhz 4-4-4-9 T1 superpi 1M stable....

Tomorow i wil mod the vdimm and see what it does with Vdimm: 2.677V :D

Btw these crucials are fare from good, they can only do 650mhz 5-5-5-12 T2 2.35V :/

[Pt1t]

Oops, you are right--it is actually L723 . Thanks for your soptting a typo:up:
As for max fsb on air: TAM=565.3MHz, Hideo=588MHz, picoo=575Mhz, me=562.4Mhz
Please note it is just an indication, not guaranteed:D

thank you ;)

other question, for this result in air , you also used 2.4v for vpll ?

cause mine does 563mhz in air on a P5K-E not yet modded (L720A696) .
http://valid.x86-secret.com/cache/232885.png

and i hope it will perform fine under ln2 :D

[fredyama]

thank you ;)
other question, for this result in air , you also used 2.4v for vpll ?
cause mine does 563mhz in air on a P5K-E not yet modded (L720A696) .
http://valid.x86-secret.com/cache/232885.png
and i hope it will perform fine under ln2 :D

You are quite welcome, Pt1t-san:)
I believe that all set vpull to the max bios setting-- in my case, it was 1.7V though actually slightly overvoltaged to 1.726V.
Please note NewBeetle has set it Auto with his P5K-E to get WR.
I am not sure what is the best cpu pull voltage for each M/B though...

Looks like you have a very nice one for sure and wish you all the best,Pt1t-san;)

[Gautam]

Wonder where he is really from;)
I too find him vaguely familiar. :confused:

Very nice chip Pt1t, these E6850's look very fun. :up:

[eva2000]

T


Thank you so much eva2000-san:)
As NewBeetle pointed out, how high FSB we can get out from it at 1.35Vcore x6 seems to be a key factor under extreme cooling:D ;)
As you know, not all L723A347 is as good as TAM's so you should grab them all while they are available:D

　

wow those are nice high clocking FSB batches you posted!

so the quick test of how well it handles extreme cooling is 6x multi 1.35v vcore test ?

thanks for the tip :)

[bachus_anonym]

Very sick FSB MHz from all of you guys - TAM, Hideo and you fredyama :up:
Great to see you jumpin' into the competition again, Fred! You can't just sit and watch all those other cough kids cough snag all the gem chips, can you? :lol:
:toast:

[fredyama]

so the quick test of how well it handles extreme cooling is 6x multi 1.35v vcore test ? thanks for the tip :)

Thanks eva2000-san:)
I guess it is an initial test necessary to dream about getting higher clockspeed but not a sufficient condition as there are many other factors to be considered such as cold bug, Vcore & other voltage setting, memory setting and so on ...
As we say, we never know till we try them:D

Very sick FSB MHz from all of you guys - TAM, Hideo and you fredyama :up:
Great to see you jumpin' into the competition again, Fred! You can't just sit and watch all those other cough kids cough snag all the gem chips, can you? :lol:
:toast:

Hahaha you are right Michal-san:up:
Thanks so much for your encouragement and also your awesome review on those fantastic RAMs:D
You must be very much enjoying your vocation;)

Cheers:toast:

[eva2000]

I see, tested my 2nd L723A347 much better fsb than my first but no where near those gems you folks have hehe

Comparing 2x E6850 L723A347 cpus on Asus Blitz Formula 1101 with Corsair Nautilus 500 water cooling:

E6850 L723A347 #1
VID: 1.325v
Max boot into memtest86+ v1.70 at 1.296v default vcore = 3933Mhz
Max FSB = 485-487FSB
Max CPUZ Validation = 4374Mhz - 9x486FSB at 1.712v
3006Mhz = 1.192v Prime95 v25.3
3600Mhz = 1.336v Prime95 v25.3
4000Mhz = 1.472v 32M
Max 1M = 4338Mhz at 1.712v
Max 32M = 4266Mhz at 1.712v

vs

E6850 L723A347 #2
VID: 1.3375v
Max boot into memtest86+ v1.70 at 1.296v set vcore = 3897Mhz
Max FSB = 530-535FSB
Max CPUZ Validation = not yet tested
3006Mhz = 1.168v Prime95 v25.3
3600Mhz = not yet tested
4000Mhz = not yet tested
Max 1M = not yet tested
Max 32M = not yet tested

[fredyama]

By Hideo -Update-

3 WRs of Super PI / mod1.5 XS

(Set up)
CPU: Intel Core2 Duo E6850 (SLA9U/L720A745/2L72065-1A00** VID 1.2875V)
M/B: ASUS P5K #5 (MADE IN CHINA bios0414)
CPU Cooling: LN2 (MaxxNeo by TAM + V-TEC ARC Bed Rev3.3 by Vigor)
Chipset Cooling : Stock + 4cm 6200r.p.m FAN
Memory: A-DATA DDR2-1200+(PC-9600) 1GBx2
VGA: ATI RageXL (PCI)
HDD: Raptor 36G
Power Supply: OCZ PowerStream 520W
Vcore: 1.920-1.925V, Vddr2: 2.67V, Vio: 3.50V(Fixed) 12V rail:12.035V(Fixed) 5V rail:5.01V(Fixed)
FSB Termination Voltage: 1.50V（BIOS）
North Bridge Voltage: 1.750V（actual）, South Bridge Voltage：1.201(actual)
CPU PLL Voltage: 2.42-2.485V（actual）
CPU Voltage Damper(Vdroop) disable, but Vdroop pencile mod(+)
OS: Windows Server 2003
(Remarks):
Thermal Grease: Ceramique/ArcticSilver
FSB550MHz, Vcore1.90V@boot, 1CPU
104PI MEM Timing:1:1　(5-4-4-4-4)-(4-10-25-10-10-4-8-4-4-2N)

1M: 8.641s- 1.922V 9x650.7=5856.4MHz (CL=5 Level10/CPU PLL 2.485V)
http://u-san.net/c-board/file/9x650.gif

8M: 1m51.734s- 1.925V 9x642.7=5784.5MHz (CL=5 Level10/CPU PLL 2.420V)
http://u-san.net/c-board/file/838-9x642.gif

32M: 8m54.218s- 1.925V 9x635.6=5720.2MHz (CL=5 Level10/CPU PLL 2.440V)
http://u-san.net/c-board/file/3355-9x635.gif

[Yoxxy]

Amazing results, Amazing FSB. Can't see how it will be beat anytime soon. Maybe X38 holds the answer :).

[dinos22]

far out man :clap:

[T_M]

geeeeesus.
Way to go 5.85 :D

[eva2000]

woah congrats

9x650.7=5856.4MHz (CL=5 Level10/CPU PLL 2.485V)

:eek:

[Godmaster]

Insane man...

Very very congratz!!:clap: :clap: :clap:

[Gautam]

I was just thinking to myself, as I lazily opened this thread, what could Team Japan possibly have now that could surprise us? Haven't we seen it all yet?

Obviously not. :eek2:

5.9 is coming soon, in fact I'm sure hideo-san can already do it for a CPU-Z verification if 1M is possible at 5.85...

[Pt1t]

I was just thinking to myself, as I lazily opened this thread, what could Team Japan possibly have now that could surprise us? Haven't we seen it all yet?

Obviously not. :eek2:

5.9 is coming soon, in fact I'm sure hideo-san can already do it for a CPU-Z verification if 1M is possible at 5.85...



Very Nice JOB :p:


But Now , next post will be 6ghz :rolleyes:

[elmor]

Speechless!

[Duniek]

:eek: and any suicide screen? :p:

[BenchZowner]

OMFG, 5.85GHz benchable :D
Surely a 5.9GHz screenshot is taken already.

Very nice job & cpu Team Japan

[nachthymnen]

ANOTHER PLANET!!!:shocked:
Can't say other!:eek2:

[hiwa]

Nice run :clap: :clap:

[0cool]

Any Coldbug with this cpu ?

Very Impressive :)

[Zannema]

:shocked: What's this'???? impressive E6850:up: :eek:

[MaSell]

Opb with this clocks should have 7.90s :lol:

6ghz will be broken in few days/weeks, i'm sure

[qballe]

speechless :shocked: :shocked: :shocked:
6 ghz are not far :D :D :D

[M3kk]

Nice E6850 :D.
Congrats :D.

[pippo369]

Congratulation's man, very impressive result. :clap: :clap:
But where can i find this insane cpu! :shocked:

[Stapler]

And to think I almost didn't look in this thread. Crazy numbers from Hideo.

[Achill3uS]

OMG, awesome CPU and results :D
TeamJapan: congrats again :clap:

[G H Z]

By Hideo - 3 WRs of Super PI / mod1.5 XS

And the crowd goes wild :clap:

Incredible Pi benching Hideo, well done :toast:

[BeardyMan]

Team japan is beyond compare.

Even when they have surprsied you they will astonish you , overwelm you with something even bigger, incredible :clap:

Congrats ;)

[ent]

:eek: :eek: :eek:

Nothing more to add :D, when Team Japan starts to bench SPi, nothing can be done to stop them. :clap:

[jugeen]

OMG! :shocked: It's amazing! :up:

[hey]

:up: not bad:shocked: is this from this world?
CONG. TEAM JAPAN as always master's of SuperPi



want to see some 3dmark01 scores with 5.75+ and get shocked:D

[I34z1k]

Insane stuff as usual guys ;) :D

[elefsinaras]

without words...........:clap: :clap: :clap: :clap:

amazing as always......amazing cpu- amazing job

i cant think any other word

[{.bLanK} GoD]

Fully awesome Team Japan! :cool:
Keep up the impressive work. :D

[fredyama]

Thank you so much all for your kind words-- Hideo would like to extend many thanks to you all:toast:

[Misko]

Another state of the art ocing from Team Japan members, congratz Hideo :clap: :clap: :clap:

@fredyama any info about temperatures?

[Slay0r]

jaw dropping stuff guys :shocked: :up: :up: looking forward for the big 6

[over@locker886]

"Usual" fantastic results from Team Japan, Welcome Hideo-san!:clap:

6Ghz near..:rolleyes:

[AuriL]

By Hideo -Update-

3 WRs of Super PI / mod1.5 XS

(Set up)
CPU: Intel Core2 Duo E6850 (SLA9U/L720A745/2L72065-1A00** VID 1.2875V)


wow amazing scores
L720A745 :rofl: thats exactly the same batch I have :D
It can hit 4550 + under h2O
now I can try to find a high fsb mobo :)

[G H Z]

Did Hideo take a photo of his bench rig? Would be nice to get a look at it if he has something :)

[fredyama]

Again, thank al lot all for your heart words:toast:
@fredyama any info about temperatures?

He did not specifically mention about it this time but believe he kept at -145C like his previous run:eek:

Did Hideo take a photo of his bench rig? Would be nice to get a look at it if he has something :)

Sorry, he has not taken any photo this time but probably you may be interesting to see his HP (http://www012.upp.so-net.ne.jp/ohij2/) by clicking the third top one on the left menu-OC実験室公開 for his usual benching set up.

[fredyama]

By DAKARA

SUPER PI / mod1.5 XS: 9.125s @5626MHz(FSB625.2MHz x 9)

CPU: C2D E6850 (L720A745) VID=1.2500V
M/B: ASUS P5K / Vcore：1.960V / Vdimm：2.550V
RAM：Team Xtreem PC2-9600 1GB×2
VGA：ASUS GeForce 7600GT
HDD：Western Digital　WD Raptor　WD360ADFD
CPU Cooling：LN2/ KuriPro4 by TAM @-115C
Chipset Cooling：Normal+12㎝FAN
Power：Seasonic SS-600HM 600W
M/B Bed：V-TEC ARC Bed Rev.5.0 Professional by Vigor
OS：Windows Server2003

http://star.ap.teacup.com/dakara/img/1188134809.jpg

Max Clock @5691.46MHz
ASUS P5K-DX / Vcore：1.960V / Vdimm：2.550V
Link to CPU-Z (http://valid.x86-secret.com/show_oc.php?id=230927)

[Solarfall]

damn fredyama :eek: another crazy score from team Japan :toast:
have to ask... would you happen to have a pic of that KuriPro4 container ???

[fredyama]

damn fredyama have to ask... would you happen to have a pic of that KuriPro4 container ???

Thanks so much Solarfall:)
Yep, it has been posted in this thread (http://www.xtremesystems.org/forums/showthread.php?t=102575)
Please click duck at Team Japan-- it is the first one;)

[Achill3uS]

very nice indeed DAKARA :toast:
TeamJapan has only 5.7G chip's how destitution :D
thanks to share this results fredyama ;)

[Solarfall]

Thanks so much Solarfall:)
Yep, it has been posted in this thread (http://www.xtremesystems.org/forums/showthread.php?t=102575)
Please click duck at Team Japan-- it is the first one;)

Oh right so it seems hehe :D but the link is dead

[boostedevo]

@ fredyama: fantastic results in this whole thread! Congrats to all of you!

I noticed that you are the only one using a P5K Deluxe and was wondering if you ever tried your proc in a vanilla P5K to see if there is any difference in clocking? I am curious if they might somehow produce better high-FSB OCs than the Deluxe or Premium.

I wish I could try LN2 looking at all your results :shocked:

[Stapler]

Oh right so it seems hehe :D but the link is dead

Works fine for me:confused:

[Solarfall]

Works fine for me:confused:

not with me i get a "404 Error - File Not Found" :shrug: anyways is it the same one that Newbeetle uses

[ataruz]

congratz... and good work

[fredyama]

not with me i get a "404 Error - File Not Found" :shrug: anyways is it the same one that Newbeetle uses

:confused: have you tried the link to duck (the top one) as mentioned before cause the link to memesama (the last one) is dead:D

[fredyama]

@ fredyama: fantastic results in this whole thread! Congrats to all of you!

I noticed that you are the only one using a P5K Deluxe and was wondering if you ever tried your proc in a vanilla P5K to see if there is any difference in clocking? I am curious if they might somehow produce better high-FSB OCs than the Deluxe or Premium.

I wish I could try LN2 looking at all your results :shocked:

Thank you boostedevo-san:)
Sorry, I have never tried my E6850 with P5K Deluxe.
AFAIR, was not able to get higher FSB (clockspeed) with my E6700 under LN2.
Moreover, it seems that P5K Vanilla is much easier to handle under LN2;)
Mind you though none of ASUS board acts like the same so difficult to grasp precisely:D

[boostedevo]

Thank you for the info fredyama-san ;) I am sure each board it is different, but I had a feeling the P5Ks were a little better under extremes somehow. My E6850 boots at 6x555 (air/water), 9x555 and 8x600 (single stage phase) in my Premium, but those are also the walls and I can't even get 1 more FSB at either multi on DI :(

Keep up the great work, I am looking forward to more of your awesome results :D

Thank you boostedevo-san:)
Sorry, I have never tried my E6850 with P5K Deluxe.
AFAIR, was not able to get higher FSB (clockspeed) with my E6700 under LN2.
Moreover, it seems that P5K Vanilla is much easier to handle under LN2;)
Mind you though none of ASUS board acts like the same so difficult to grasp precisely:D

[Turrican]

nice results. the vcore is really insane :D

[Gautam]

Another nice result this time from DAKARA. :)
Thanks so much Solarfall:)
Yep, it has been posted in this thread (http://www.xtremesystems.org/forums/showthread.php?t=102575)
Please click duck at Team Japan-- it is the first one;)

I like what I see with the Maxx Neo. :yepp:

[before]

Very well done Team Japan! :) Really impressive!

[.devastatioN]

Congrats team Japan for all the great results :)

[NewBeetle]

Hi, fredyama-san. :)
This is my today's results. :D

By NewBeetle

SUPER PI / mod1.5 XS: 9.110s @5548.4MHz(FSB616.5MHz x 9)
http://homepage2.nifty.com/NewBeetle/9x616.png

(Setup)
CPU: C2D E6850 (L720A745#2) VID=1.2750V
M/B: ASUS P5K-E / Vcore：1.91V / Vdimm：2.61V
RAM：Team Xtreem PC2-8500 C4 1GB×2
VGA：ATI XPERT 98 PCI 8MB
HDD：Western Digital　WD Raptor　WD360ADFD
CPU Cooling：LN2/ MaxxNEO by TAM @-125C
Chipset Cooling：watercooling/ Alphacool NexXxoS NBX-A
Power：OCZ PowerStream 520W
M/B Bed：V-TEC ARC Bed Rev.3.3 by Vigor
OS：Windows Server2003

Max Clock @5576.84MHz (http://homepage2.nifty.com/NewBeetle/E685_2_9x619.png)

[G H Z]

That is very good NewBeetle, time to chip hunt some more :D

[nachthymnen]

Hi, fredyama-san. :)
This is my today's results. :D

By NewBeetle

SUPER PI / mod1.5 XS: 9.110s @5548.4MHz(FSB616.5MHz x 9)
http://homepage2.nifty.com/NewBeetle/9x616.png

(Setup)
CPU: C2D E6850 (L720A745#2) VID=1.2750V
M/B: ASUS P5K-E / Vcore：1.91V / Vdimm：2.61V
RAM：Team Xtreem PC2-8500 C4 1GB×2
VGA：ATI XPERT 98 PCI 8MB
HDD：Western Digital　WD Raptor　WD360ADFD
CPU Cooling：LN2/ MaxxNEO by TAM @-125C
Chipset Cooling：watercooling/ Alphacool NexXxoS NBX-A
Power：OCZ PowerStream 520W
M/B Bed：V-TEC ARC Bed Rev.3.3 by Vigor
OS：Windows Server2003

Max Clock @5576.84MHz (http://homepage2.nifty.com/NewBeetle/E685_2_9x619.png)

9.11 @ 5548mhz it's a very great time!:clap:
I like also your RAM settings!:D

[fredyama]

Thanks everybody for your hearty words:)

I like what I see with the Maxx Neo. :yepp:

Yep, she is so beautiful, isn't it?

Very well done Team Japan! :) Really impressive!

Thanks before-san:) I bet we will soon see many awesome results from French Team;)

This is my today's results. :D

Thanks for your posting of your #2 results:)
It was a bit dissapointed to find that #1 with higher FSB could not OC well under LN2:(
Our guess, higher FSB is necessary, may not be always applicable to E6850 unlike E6700:confused:

I will try my #1, around 530FSB, to find out though...
Cheers:toast:

[over@locker886]

Great jobs again!:up:

[massman]

Oh, missed this thread ... well this WR-overload thread. Well-done Hideo, Newbeetle, Dakara, Fredyama and all those other high-class benchers I haven't mentioned before :bows:

[NoRogeR]

sick clocks guys, keep it up :up:

[gprhellas]

Really amazing results.
Keep pushing.
Have you tried timing 4-4-2-4-2 ?
A big BRAVO to team japan,
RESPECT. :clap:

[noel82]

Amazing job...i'm tuned!!! :woot:

[cpulloverclock]

Hideo-san has an amazing-awesome cpu :eek: :clap: :up: :shocked: :cool:

BY HIDEO-SAN (TEAM JAPAN)

E6850(L720A745/2L)+#5 P5K

《System》
CPU: Intel Core2 Duo E6850 (SLA9U/L720A745/2L72065-1A00** VID 1.2875V)
M/B: #5 ASUS P5K (made in china bios0414)
CPU Cooling: LN2 (MaxxNeo by TAM + V-TEC ARC Bed Rev3.3 by Vigor)
Chipset Cooling : ノーマルシンク + FAN 4cm 6200r.p.m
Memory: A-DATA DDR2-1200+(PC-9600) 1GBx2
VGA: ATI RageXL (PCI)
HDD: Raptor 36G
Power Supply: Power Stream 520W
Vcore: 1.918-1.922V, Vddr2: 2.65V, Vio: 3.50V(Fix) 12V系12.035V(Fix) 5V系5.01V(Fix)
FSB Termination Voltage：1.50V（bios）
North Bridge Voltage：1.760V（actual）South Bridge Voltage：1.201(actual)
CPU PLL Voltage：actual2.440-2.488V（actual）
CPU Voltage Damper(Vdroop) disable, but Vdroop pencile mod(+)
OS: Windows Server 2003

備考：グリス : Ceramique/ArcticSilver
FSB560MHz Vcore1.90V 起動　1CPU
104_π MEM Timing:1:1　(5-4-4-4-4)-(4-10-25-10-10-4-8-4-4-2N)



http://u-san.net/c-board/c-board.cgi?cmd=one;no=1238;id=

http://www012.upp.so-net.ne.jp/ohij2/p5k.htm




1M: 8.563 at 5914MHz WORLD RECORD

(CL=5 Level10/CPU PLL 2.488V)

http://www012.upp.so-net.ne.jp/ohij2/104-9x657.gif




8M: 1.49.797 at 5806MHz WORLD RECORD

(CL=5 Level10/CPU PLL 2.442V)

http://www012.upp.so-net.ne.jp/ohij2/838-9x645.gif

Soon 6GHz at the screen????




I believe that 660 is difficult with a 9x multiplier (Hideo says "IMPOSSIBLE" with his cpu)

SSの6GをTryしましたが、x9だと、FSB660でﾌﾘ-ｽﾞします。現状、不可能です。

Best FSB for a SuperPi 1M, 667-669 would be the limit

-120°C

http://www012.upp.so-net.ne.jp/ohij2/666.gif

[proxis]

lol :slobber:

[danny_discus]

Ummmmm.......................:up:

[Oliver]

Congrats Hideo-San.

cpulloverclock cool post :D.

[eva2000]

woah nearly 6ghz and 8.563s 1M! congrats...!

2.488v CPU PLL :eek: :D

[Gautam]

Madness!!!!! :wierd:

[M3kk]

Maybe 6ghz valid is possible? :D

[BenchZowner]

Madness!!!!! :wierd:

Madness ? No!
This is Team Japaaaaaaaaan! :D

Congrats Hideo-san :toast:

[M3kk]

Guess what i received today? :D

http://mekk.homeip.net/imagesharing/uploads/040f34cf15.jpg

http://mekk.homeip.net/imagesharing/uploads/be271d9211.jpg

[harleybro]

:shocked: Insane cpu and super-pi you have hideo-san. Congrats on awesome results!!!!!!!!!

[massman]

This really deserves it's own thread :)

[charlie]

Congrat's TEAM JAPAN!!!!

:toast:



has anyone grabbed a screenie of 6gHz yet????????

[Gautam]

Not yet...have you been waiting to be the first for your re-entry into the xtreme? ;)

[boostedevo]

:eek2: :eek2: :eek2: :eek2: :eek2:

I am running out of words to describe what TeamJapan is accomplishing! I'll just have to use smilies from now on :D

Congrats hideo-san!

[charlie]

Not yet...have you been waiting to be the first for your re-entry into the xtreme? ;)

I'd LIKE to pick up some new equipment soon. I still have my ACCU-AIR account for LN2... I still have my immersion oil... I can still play :D
But I'm SOOOO out of it, I need to research best choices for CPU, MB and RAM. But it seems that 667fsb is more than a bit difficult. And there is NO G0 with a 10x multi or an unlocked multi... and a B2 probably can't DO 6gHz... right?

[Gautam]

Pretty fair assumption. There are E67's and X68's that can come close but they're very hard to find.

Of course finding an E6850 with the proper FSB in it is as well. :p:

[Hyperr]

:shocked: :shocked:
Amazing! Congrats!

[Zannema]

OMG :eek: :eek: :eek: ........5915mhz on E6850 it's incredible......nice run hideo-san :clap: :clap:

[charlie]

Pretty fair assumption. There are E67's and X68's that can come close but they're very hard to find.

Of course finding an E6850 with the proper FSB in it is as well. :p:

I assume that M0 Allendale doesn't have that kind of potential? Golden X6800 seem more like 5500 max potential. Hmmmm...

[BenchZowner]

I assume that M0 Allendale doesn't have that kind of potential? Golden X6800 seem more like 5500 max potential. Hmmmm...

Hmmm...back to the old avatar ? Next move... order some parts :D

I'd go for a E6700 or E6850 now for SuperPi... don't ask me to pick you up any low multi CPU though, I'm a good low FSB CPUs 'finder' :D ( bad luck FTW! ) :rofl:

[BeardyMan]

I assume that M0 Allendale doesn't have that kind of potential? Golden X6800 seem more like 5500 max potential. Hmmmm...

Hehe i gues you missed out elmors 5.8ghz X6800,

I believe, totally guessing, that X6800 is able to come close to 6ghz as well if people try also the 2.4V ppl, or they could just release a Q6850 lol :D

[Moonman]

:shocked: CPU
:shocked: MEM

Congrats :up:

With ovp mod on this P5K and 2V I believe it's a 6 GHz CPU.

[Dekara]

Fantastic result again from Team Japan, congrats Hideo :clap: :clap: :clap: .

[ent]

Its far beyond imagination! Awesome clocks! :clap: :clap: :clap: :clap: :clap: :clap:

Whats the max FSB at air with this CPU?

[G H Z]

Hideo-san you are a master of OC! Bravo! :clap: :clap: :clap:

[Godmaster]

B-R-A-V-O HideoSAN :clap: :clap: :clap: :clap: :clap:

Full Respect,great clocker,great cpu and great PI-time!!!!!
Very congratz ;)

[Monstru]

True masters of overclocking science. My deepest respect for Team Japan....

[rra]

You guys are so close to 6000mhz its unbeleaveable but sooo goood to see well done on fantastic CPU and clocks

[MaSell]

amazing cpu, must hit 6ghz

[before]

Extreme CPU! The one in a billion! :D

Congrats Hideo-san :toast:

[luihed]

OMG....:eek: This is just some sick overclocking Team Japan...

Total ownage of spi, last few WR holders should be thankfull they got to borrow it for a lil bit..... now theyre all back to its rightfull owners.....

Congrats Hideo-san and the rest of Team japan:toast: very well done....

6ghz has not been shown yet but looking at these clocks, it must have been done... or very very close.....

[dinos22]

this CPU is just hmmm incredible and who better to test it than Team japan :clap:

[fredyama]

By picoo

modPI 1M: 8.968s@5664.2MHz

CPU：Core 2 Duo E6850（L720A745／2L/VID1.2750V）
M/B：DFI LANPARTY UT P35-T2R, No Vmod
CPU cooling: LN2
Chipset cooling:
Northbridge: Water cooling Alphacool(mod)@about 9℃（assisited by air-con）
Pump: Alphacool AP900 12V + Voltage Module12-24V AP +step-up adaptor
Radiator: Alphacool NexXxoS XtremeⅢ/120ｘ38ｍｍ(2000rpm)ｘ3
Reservoir: Mitron Interlink WT-TB-B
Tube: innovatek(500898) 10/8mm
Southbridge: zalman ZM-NB32K/Fan

Memory: Team Xtreem PC2-9600(DDR2-1200) CL5 1GBx2 with Heatsink:Thermalright HR-07 X2
VGA: Matrox MillenniumG450/D32PDV（PCI）
HDD: HDS728080PLA380 80GB
PSU1: OCZ Power Stream Power Supply 520W（for system）　
PSU2: Zippy-720PE（Watercooling）
OS: Server2003 Enterprise Edition
M/B BED: V-TEC ARC Bed Rev.5.0 Professional by Vigor
Copper Pot: kuri-Pro4 by TAM
System Rack: B-ONE x2
Thermal Grease: Céramique by ArcticSilver

Vcore:1.84V, Cpu pull:1.750V (Bios)

Please refer to his blog- http://wind.ap.teacup.com/picoo/265.html for more details.

http://wind.ap.teacup.com/picoo/img/1189606031.jpg　

[eva2000]

nice another sub 9 second 1M time :D

[dinos22]

CPU PLL 1.6v :eek:

that CPU is very nice

have you tried upping the PLL to see if possible to gain stability in 32M :D

[Oliver]

Looking very good ;).

keep pushing it :D.

[Zannema]

Nice clock fredyama-san......i like your E6850.......all team japan's 6850 :D

[fredyama]

picoo wishes to say thank you to all:)

BTW, this is his 7th one to get a sub9s finally:D
Also, cpu pull voltage was a typo that it should be 1.750V in Bios.
As one of pots of his P5K Deluxe was blown like NewBeetle, he tried with UT P35-T2R.
He will try it with all max available voltage settings next time though;)

[Oliver]

Sweet, picco-San we need clocks ASAP :D.

Keep up the good work Team Japan ;).

fredyama-San thank you for the info.

[fredyama]

By OMEGA3 @24 Sept

8.719s @5827.6MHz (FSB647.5MHz x 9)
http://bird.zero.ad.jp/~zan89925/8.719.jpg

(Set up)
M/B: ASUS P5K (Vcore,Vddr mod)
CPU: E6850 Retail L720A745
CPU Cooling: LN2
Memory: Team Xtreem PC2-8500 CL4 1GB x2
VGA: MilleⅡ PCI
HDD: ST340016A
Power Supply: Zippy-460SATA
Vcore: 1.910V, Vdimm: 2.65V, Vio: 3.53V, CPU-pllV: 2.35V (actual), NBVcore: 1.70V, Vfsb: 1.50V, (BIOS Setting).
OS: Windows Server 2003
MEM: 5-4-4-4-4-25-4-4-4-A
CopperPot：OMEGA SpecialⅢ（Bottom plate 30mm）＋spider
Grease：Ceramique by Arctic Silver

[harleybro]

Non-stop insane results from Team Japan. :clap: :shocked: :clap: Has any of them tried 3d even with a lesser card to see what the cpu's max in 3d? Seeing this 5800+ I wonder if the chip can run multi cored at 5600+?

[BeardyMan]

CPU: E6850 Retail L620A745

:eek: :D

great results man, can't wait for you guys to tear up 45nm ;)

[@rne]

Incredible piece of silicon you got there Team Japan - awesome work!

[Turrican]

wow,really awesome super pi run :eek:

go for 100% oc :D

[George_o/c]

Congratulations hideo-San, amazing clocks the ones you got there :clap: ... cpu pll 1.6V :o unbelievable ... !
Looking at the spi times done with such a high cpu frequency, I think that it's possible for you to have a 6GHz validation ... Anyway, well done continue just like that ! :up:

[Cyprinus_Carpio]

Great!:clap:
amazing pi run:shocked:

[wa77ss]

I think its a good chip, but more so just very talented overclockers.

Time and time again they get the WR in Pi, you can only get so lucky with golden chips, the rest is skill.

Great job!

[F.O.G.N.A.]

:shocked: :shocked: :shocked:

Congratz Omega3 :clap:

Insane cpu and insane results :shocked:

[tet5uo]

Very crazy CPU and results. I can only dream :eek:


My 6850 is a world record in it's own right....

max stable 3.4 ghz 1.5 v :rofl:

[OMEGA3]

Thanks a lot all!!:toast:

@BeardyMan-san,
Ahaha, Sorry, E6850 Retail L620A745 →L720A745

fredyama-san,Thanks for the report my result.:up:

[G H Z]

Nice 1M OMEGA!! :clap:

[FUGGER]

Unreal FSB, great job on working those boards that high for benching. Hopefully soon we will see more DDR3 at that kind of bus speed.

The new 45nm cores love the voltage if you can keep it cold, it will be a race for 6s when you guys switch over.

Will anyone from Team Japan be at IDF in Taiwan?

[Misko]

Congratz OMEGA3 :up:

[natedog420]

just googling around and found this. i havent seen this and im sure not many of you have if at all. almost 6ghz core 2 duo

http://translate.google.com/translate?hl=en&sl=ja&u=http://www012.upp.so-net.ne.jp/ohij2/p5k.htm&sa=X&oi=translate&resnum=2&ct=result&prev=/search%3Fq%3Dcpu%2Bpll%2Bvmod%26hl%3Den%26sa%3DG

[aasmaukr]

It's all in the thread named "E6850 LN2 Actions @Team Japan" in this category ;)

[PanteraGSTK]

Wow...I haven't been keeping up with this thread. Team japan, there are no words to describe your accomplishments... I'm still shocked to see a 6850 and not your usual 6700, and a P5k vanilla. Wow. http://www.freesmileys.org/emo/shocked018.gif So, is the p5k or p5k-e better? Don't you guys use the p5k-e for your quad core benching? Sorry for all the questions.

[OMEGA3]

Many thanks all!!

FUGGER-san,
Wonderful PI time by yorkfield was seen.:up:
Hereafter, it again will be the enjoyment.
Someone going to IDF has not been heard yet.

PanteraGSTK-san,
I think may be the P5K is better for LN2 cooling.
P5K-E hears two capacitor explosions around Vcore....
Mr. New Beetle will also say that P5K is better in the LN2 cooling.

With quad core....I think it is perhaps the same though not understood because not cooled in quad core.