PDA

View Full Version : 5Ghz SP2004 with 2L LN2 (E6850es G0/-115c)


VictorWang
08-15-2007, 10:28 AM
a damn good air chip.
1.6v 4.4g cpuz screen :(
also loves cold.
-135c bootable and -120c benchable.
1.52v 5Ghz pi_32m no prob.
but....Fxxxing fsbwall = 570mhz :(

so...cannot waste my LN2 even if it's only 2L left :D

did anyone do this crazy boring thing before ? :rofl:

1.59v 5Ghz SP2004 for 10min (prio=9) :up:

shimmishim
08-15-2007, 10:35 AM
LOL. Good one Andre!

5 ghz 10 minutes stable orthos.. that's a good laugh! :D

and what were your base temps reading when you did this test?

Eldonko
08-15-2007, 10:39 AM
Sweet chip vic! You max it out yet? should be some crazy clocks for PI.

Gautam
08-15-2007, 11:23 AM
lolol...next time anyone comes in :banana::banana::banana::banana::banana:in' "is it stable?" you can say...YES!

SoF
08-15-2007, 11:25 AM
haha looks like you have too much LN2 :ROTF:

But quite funny to see 5 GHZ prime stable - you should go for the new CPUz beta - it reads vcore >1.5V (looks better on the pictures) ;)

Well done again buddy :toast:

Solarfall
08-15-2007, 11:30 AM
lolol...next time anyone comes in :banana::banana::banana::banana::banana:in' "is it stable?" you can say...YES!

lmao... VictorWang great scores man :toast:
i must ask what is the stepping of your e6850 ???

blind_ripper
08-15-2007, 12:26 PM
vic kick up the vcore and check again for fsb-wall !
had some luck finding some strange things about it ;)

jugeen
08-15-2007, 12:38 PM
:shocked: amazing! congratulations! :clap:

eva2000
08-15-2007, 12:55 PM
nice Vic.. what psu was used ?

Achill3uS
08-15-2007, 01:14 PM
looks fun Victor :D nice chip btw :up:

K404
08-15-2007, 01:31 PM
1.52 and 1.59V LOL You just made 5GHz look easy!!

I think a lot of people would like to have that chip!!

rra
08-15-2007, 01:59 PM
Now Im getting ready to sell QS6700 for one of these being able to bench at those speeds and those volts means no volt mods on most boards now even running orthos at 5000mhz If you had told me a 2years ago this would be happening I would have laughed at you .
V ery nice Victor surely must have had a good laugh watching that.:up:

VictorWang
08-15-2007, 08:53 PM
:D thx guys.
actually, the chip can do 5.03G sp2004,
but I wanna have a good looking, so lower the clk to 5Ghz :D
it's really funny to see such "stable clk".
would be an awesome cpu under DI.

to Geroge:
PSU=Topower/Epower 2000w.
http://vic.expreview.com/attachment/2kw-2.jpg

mobo= P5K-Premium (the board running tooooooooo cold, cap almost frozen)

rick_fx
08-15-2007, 09:08 PM
2kW PSU:eek:

5ghz Sp2004 on LN2 is crazy, Victor :D

Monstru
08-16-2007, 01:49 AM
That is exactly the kind of chip some people would kill to have for dice sessions. Congratulations!

over@locker886
08-16-2007, 02:49 AM
hehe, nice you ran SP2004 at 5Ghz. We only flashed the bios on 5ghz at once:D

very bad that almost all E6850 have fsb wall about 570-580fsb :(

Leora
08-16-2007, 04:25 AM
Seems the E6850 chip is a keeper from the various results posted so far :D Have to admit seeing a 2000W PSU is kinda mind-blowing lol! :shocked: :p:

Oliver
08-16-2007, 04:31 AM
Looking very good champ ;).

Keep pushing it :D.

stunned_guy
08-16-2007, 04:42 AM
Holy :banana::banana::banana::banana:...2kw psu....damn :D :eek: