PDA

View Full Version : Celeron 440 OC 4 ghz Superpi 1m&8m run on AIR

KeZzZu
08-13-2007, 05:58 PM
Hello folks today i received my shipment from germany:
Celeron 440
Abit IP35-E
OCZ Reaper 6400 2gb kit (4-3-3-15)
ocz 430w power supply
7600gt

Vcore: 1.52v from Bios
Vmem: 2.2v from Bios
Chipset 1.7v and 1.33-1.39 (i dont remember which were correct one)

Memset
4-4-4 rest AUTO


OS : well just uninstalled nf4 drivers and were ready on overclocking allso no tweaks used


Ok so my saga started, slapped cpu and mems on mobo (didnt even change thermal paste on stock cooler) swapped my Dfi nf4 U away from case.
Fastly throwed mobo in and fired up and starded to study bios settings.

And there we were she and me... started to spank every juice away from her, but no... She did not give up... and here are result's.
Jumped 100mhz every time when i raised cpu clock :up:

SP1M 3.7ghz stock cooling
http://img227.imageshack.us/img227/3721/cele1m5bnt2.jpg



SP8M 3.7ghz stock cooling
http://img181.imageshack.us/img181/6510/cele8m8na7.jpg



SP32M 3.7ghz stock cooling
http://img408.imageshack.us/img408/6416/cele32m6el1.jpg


*ps superpi program is finnish version, only translated text's




UPDATE :
Changed cooler to Zalman 9500 and cranked vcore up to 1.7v

Results are:

100% OC superpi 1m and 8m passed !

1m&validation
http://img233.imageshack.us/img233/5136/celeenkka2cu5.jpg

8m
http://img62.imageshack.us/img62/4637/cele8enkkaxj5.jpg

i could push few mhz higher but cpu temps raising too high
fteddd
08-13-2007, 07:05 PM
nice job!! ich 1.7v? or mch 1.7v?
HoriWanderFuLL
08-13-2007, 10:54 PM
Nice tell me if you can boot this thing up after 408 Fsb because mine stops at that point...

Cheeers Hori
Solarfall
08-13-2007, 11:28 PM
not bad scores mate :toast: remember of doing the same kind of scores with my 440 on air too.
btw im interested what is the stepping on your chip??
symphy
08-13-2007, 11:31 PM
lol.... nice clocks... and finnish sPI xD
KeZzZu
08-14-2007, 03:28 AM
not bad scores mate :toast: remember of doing the same kind of scores with my 440 on air too.
btw im interested what is the stepping on your chip??


FPO: Q705A707
SL9XL
KeZzZu
08-14-2007, 03:29 AM
nice job!! ich 1.7v? or mch 1.7v?

ICH 1.7v
KeZzZu
08-14-2007, 05:19 AM
3750 mhz sp1m run allso i have runned 3770 but result didnt get much better and i need better chipset cooler, whole thing is on flames :rofl: mems around 950@ 5-5-5-15 rest auto.... few os tweaks
http://img57.imageshack.us/img57/4375/cele1k1po2.jpg
KeZzZu
08-15-2007, 08:09 AM
Yesterday nigh, i did change cooler and got some nice results on air, edited on first post
tiborrr
08-16-2007, 09:09 AM
Tune your mem timings and run the memory @ at least 6:5 MEM/FSB mode. Especially Trfc looks horrible and perhaps you could try to push performance level down to at least 6, maybe 5 if stable.
Kingcarcas
08-16-2007, 10:03 AM
Insanely fast little chip!:shocked:
natedog420
08-16-2007, 10:40 AM
why u hide the top of memset with the ok of super pi when its done? good clocks:)
Solarfall
08-17-2007, 01:02 AM
KeZzZu where is the 4ghz screenie :D