SoF's summer adventure - 100% on 4 different CPUs & 5 GHZ CPUz + more...

[SoF]

LN2 Results:

1m 9.578s 5400 MHZ 1.85V 1:1 4-4-4-4

http://www.casextreme.net/pixx/benches/e6850/ln2/9.5s.jpg


4m 59.641s ~5300 MHZ 1.85V 1:1 4-4-4-4 (not sure anymore which run it was, was only to keep the cpu "warm" ;) )

http://www.casextreme.net/pixx/benches/e6850/ln2/4m_sub1min.jpg


32m 5202 MHZ 1.85V 1:1 4-4-4-4
10min 28s (unfortunatly the one and only tested before we had to change to ddr3 for the am3 contest on AOCM)

http://www.casextreme.net/pixx/benches/e6850/ln2/32m.jpg




Hi,

finally it's time again for me to open a topic here and show my series of Intel low-cost benching on Mach I single stage.
I had an E2140 and E2160 for getting started with S775. Maybe some of you remember me as a S939 overclocker but everybody has to change some time ;)

A picture of the parts I ordered for the final bench run during the last 3 days (E4400, E4500, E6850):

http://www.xtremesystems.org/forums/attachment.php?attachmentid=62881&stc=1&d=1187031221

I did not used the P965 Board - this is for a friend, I used P35-DS3P. The 8800 GTS was also for benching only and will go into my friend's system as well.

Setup for all runs:

- Gigabyte P35-DS3P
- G.Skill 2x1024MB DDR2-1066 (F2-8500PHU2-2GBHZ)
- X800 GTO for E2140, E2160, E4400 and E4500 Benches
- Mach I single stage


------------------------------E2140---------------------------------
So let's start with E2140:
100% OC 3200 MHZ on E2140 - this was FSB (hard)wall - not even 1.8V helped, iirc this was done with ~1.6Vcore.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=62890&stc=1&d=1187034284

1m @ 3176 MHZ on E2140 (http://www.hwbot.org/result.do?resultId=623724) (32m @3160 MHZ here if you want to see) (http://de.geocities.com/prignozert/e2140/32m_sub20min_e2140.jpg)

http://de.geocities.com/prignozert/e2140/sub19s_e2140.jpg

------------------------------E2160---------------------------------
106.5% OC on E2160 with ~1.65Vcore (http://valid.x86-secret.com/show_oc.php?id=218698) (validation link)

1m @ 3706 MHZ on E2160 (http://www.hwbot.org/result.do?resultId=625787)

http://de.geocities.com/prignozert/e2140/1m_e2160_after5min_s.png

------------------------------E4400---------------------------------
103% OC on E4400 wtih ~1.8V (http://valid.x86-secret.com/show_oc.php?id=227812)
Pi 1m @100% OC 4000 MHZ @1.8V (http://www.hwbot.org/result.do?resultId=633385)
Wprime32m @3950 MHZ (http://www.hwbot.org/result.do?resultId=633367)
Wprime 1024m @3800 MHZ HWBot 2nd (http://www.hwbot.org/result.do?resultId=633376)

------------------------------E4500---------------------------------
100% OC E4500@4400MHZ @1.85V (http://valid.x86-secret.com/show_oc.php?id=227505)
4301 MHZ Pi 1m 13.59s @1.8V (http://www.hwbot.org/result.do?resultId=633066)
4125 MHZ Pi 32m 14min 3s (http://www.hwbot.org/result.do?resultId=633188)
4301 wPrime32m 19.690s (http://www.hwbot.org/result.do?resultId=633142)
Pifast 23.95s (http://www.hwbot.org/result.do?resultId=633154)
Wprime1024m sub 11 minutes (http://www.hwbot.org/result.do?resultId=633171)

------------------------------E6850---------------------------------

5 GHZ E6850 validation on Mach I (http://valid.x86-secret.com/show_oc.php?id=227983)
http://www.xtremesystems.org/forums/attachment.php?attachmentid=62886&stc=1&d=1187032293

19.89s Pifast 4806 MHZ (http://www.hwbot.org/result.do?resultId=633534)
17.69s Wprime 32m 4788 MHZ (http://www.hwbot.org/result.do?resultId=633539)

10.266s Pi 1m 4950 MHZ :shocked:
http://67.90.82.13/forums/attachment.php?attachmentid=63177&stc=1&d=1187564808

233k AM3 E6850 @4806 MHZ + 8800 GTS 685/1050 MHZ
http://www.xtremesystems.org/forums/attachment.php?attachmentid=62884&stc=1&d=1187032211

I've done 01-06 benches with 8800 GTS if you want I can show these results as well even I think they are just quick benches (I just had a couple of hours) and not that special ;)

Hope you enjoyed all the results.

regards
SoF

E6850 max FSB 600 @Mach I :shocked:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=64084&stc=1&d=1189213312

[loc.o]

Very nice :up: Any pics/specs on the mach I ? It better be modded :D Strong E6850.

[Oliver]

Looks like you was having some fun, looks very good.

Keep pushing it.

[SoF]

I have pictures of the Mach I somewhere, but looks like the webspace is killed for the moment :(
I'll add the hwbot links for E2140 and E2160 right now.

Thanks for the nice words ;)

[massman]

Wow, looks like you had a fantastic summer :D

Great results, congrats :)

[SoF]

Thanks, I really had a good time with all that hardware here. I think it was the longest and biggest run I've ever made.
I was so happy when I saw me under TOP100 in hwbot again :)

[massman]

Seems like you kicked me out of the top100 :p

[SoF]

Oh I'm so sorry :p: But I'm sure it won't take you long to return ;)

[brunormt]

Amazing!!!
Congrats..
Everything on air?

[SoF]

First sentence buddy "...Mach I single stage" ;)

The Zalman cooler in the picture wasn't used at all for the benches - every processor went directly under phase change ;)

[symphy]

Nice clocks an the 6850 SoF ;).
Is you Mach modded? 5 GHz indicites at least r404a... or a CPU monster.

[Solarfall]

hey impressive scores SoF :toast:
btw would be interesting to know what are the steppings on those cpus that you tested.. :)

[Monstru]

Congrats, that is very impressive. One question keeps on popping up, and of course I will also ask you that question: is that Mach 1 modded or that E6850 is a true monster the likes we have never seen before?

[pippo369]

Congrat's your E6850 is very fantastic cpu, 5021Mhz on S.S. is very impressive result. What's the batch number. :D

[SoF]

Yeah the Mach I has r507 in it iirc - last repair is one year behind but I think it was r507 again.

Sorry about the batches but I've not written down them. I was so in a hurry that I not even looked on the chips ^^

E2160: L702C576 SLA3H Malay
E4400: L705A437 SLA3F Malay

@Symphy you'll see this chip on AOCM - hope it will rock some nice 1m times ;)

[SeLecT]

Very nice scores and benches! Great work!

i think you need Fr3ak's E2140 :)

Maybe my E2140 will run better with some cold! :)

[massman]

The E21X0 chips suffer from hard cpu walls indeed.

Troman did this (http://www.hwbot.org/signature.img?iid=24686&thumb=false) run on dry ice and 1Mhz more was lock-up :(

[SoF]

Every E21X0 chip >400 FSB is a good one I think...that E2160 is quite impressive :)
I think Fr3ak's chip under cold would do 20-30 MHZ FSB more and would lock up there as well - would give a nice percentage overclock :D The cheapest ones are nice toys for a couple of days and good for office and cheap all-day rigs but I wouldn't go for them under cold and high clock benching again.
E4400 and E4500 is where the fun starts, specially the E4500 run on 5 GHZ is a nice achievement to go for ;) Not sure if mine where FSB-limited as both topped out around 400 FSB like the small ones.
I just had one retail non-handpicked of each so I think some of them might have a lot more in them ;)
But my E6850 is a good bencher I think, can't wait to give it more cold end of september :D :cool:

@massman I lost a medal and you are in front of me in the "hardware junkie" ranking again :p: I hope to find any other hardware soon to go for some new medals :D

cheers :)

[massman]

You will have to be quick: this weekend OCTB is doing a show on a local lanparty, where we should have enough material to do some damage (LN² and dice) :)

[SoF]

Hehe I will let you do, watch the results and then strike back :D
I still have my summer holidays and I should spend some time outside now ;)

[Fr3ak]

Nice numbers and benches SOF. Looks like you had some fun ;)

That E2140 is not exactly mine yet. It still belongs to the company I am working for right now, but chances are very high that I am allowed to buy that particular CPU. After GC I will be able to bench sub zero on a daily basis too, so that E2140 will be my first victim I suppose. I hope sub zero and very high volts will help to clock it a little further than 45x FSB. I was able to boot with a higher FSB, but with limited time and the bad Coolermaster Hyper TX, it was too unstable to boot into windows.

The M0 E4500 ES I have kind of sucks. It is not a great clocker at all. 2.800 MHz with stock volts and only 3.700 MHz 1M at 1.6V on very good water cooling :/

[VictorWang]

lol, lots of toys, nice E6850 :D

[SoF]

Nice numbers and benches SOF. Looks like you had some fun ;)

That E2140 is not exactly mine yet. It still belongs to the company I am working for right now, but chances are very high that I am allowed to buy that particular CPU. After GC I will be able to bench sub zero on a daily basis too, so that E2140 will be my first victim I suppose. I hope sub zero and very high volts will help to clock it a little further than 45x FSB. I was able to boot with a higher FSB, but with limited time and the bad Coolermaster Hyper TX, it was too unstable to boot into windows.

The M0 E4500 ES I have kind of sucks. It is not a great clocker at all. 2.800 MHz with stock volts and only 3.700 MHz 1M at 1.6V on very good water cooling :/

I would expect the E2140 to do ~47X on DICE and maybe 48X under LN2 - anyway a good chip and you really should give it a try ;)
Nice to hear you'll be in the subzero class soon :)

And yes your E4500 seems to suck, I built an air-cooled system with my one and it does 3030 MHZ @ ~1.34V orthos stable with activated fan-control. with 1.4V and de-activated fan-control it would do ~3.2 and more I think. 1m not tested but think it should go high ;)

lol, lots of toys, nice E6850 :D

hehe thanks :)

[Monstru]

Stilll...what FPO did you say that 6850 is? :)

[Fr3ak]

I would expect the E2140 to do ~47X on DICE and maybe 48X under LN2 - anyway a good chip and you really should give it a try ;)
Nice to hear you'll be in the subzero class soon :)


I already joined the subzero class long ago :)
I am talking about daily sub zero ^^ At least for the CPU for now. =) Dimas will bring something nice to GC for me :)

[Nosfer@tu]

I already joined the subzero class long ago :)
I am talking about daily sub zero ^^ At least for the CPU for now. =) Dimas will bring something nice to GC for me :)

GC ?

[SoF]

GC ?

it's the Games Convention here in Germany where some of us will be.
Unfortunatly I think I won't be there :(

[fireice2]

great overclocks. :D im just not so lucky with my hardware. hehehe

[Pedro Rocha]

Hi my friend,
These are very nice results with your new toys and the good old Prometeia, keep it coming :up: :up:

[SoF]

Hi my friend,
These are very nice results with your new toys and the good old Prometeia, keep it coming :up: :up:

Thanks Pedro - I`m really happy that I can be part of the competition again :D

[LardArse]

nice new rig sof, pic of the whole vap setup?

[SoF]

Hey shami,

I am not at home currently, I just found 2 older pictures. The system looks like crap but it works :D

Mainly still looking the same just with the new hardware in it ;)

http://de.geocities.com/prignozert/Bilder/overworked/omg_testrig_day1.jpg

http://de.geocities.com/prignozert/Bilder/overworked/sub60_blitz.jpg

cheers,
SoF

btw: I read you will be at GC?

[LardArse]

yes SoF I'll be there soon! I see you've got your library sandwiched between ur rig there,.

[SoF]

that's what old school books are good for :D

Unfortunatly it seems that I can't visit GC :( But I still try to find a way to be there at least for some hours to see you and some others ;)

[SoF]

I managed to squeeze out an 1m @4950 MHZ - 10.266s (still single stage)
Really sweet this E6850 :D

http://67.90.82.13/forums/attachment.php?attachmentid=63177&stc=1&d=1187564808

this chip screams for cold, I can hear it every day ;)

[Fr3ak]

Nice chip SoF! Any idea what your evap temps are?

[SoF]

If the sensor is still as exact as it was after the last repair it should be somewhat around -40°C during the 1m run.
More cold and it will do sub 10s for sure - just a few weeks ;)

[SoF]

Finally found the time for some max FSB tests - that E6850 simply rockz...3 weeks until LN2...just can't wait anymore :yepp:

http://valid.x86-secret.com/show_oc.php?id=239780

http://www.xtremesystems.org/forums/attachment.php?attachmentid=64084&stc=1&d=1189213312

1m @596 is not too shabby I think:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=64085&stc=1&d=1189213312

[google]

very nice scores, do you have any photos of your rig?

[White Cat]

I only have an old one with my K8NXP-SLI in it but basically it still looks the same.
Looks like crap but worxx :D

ps: don`t wonder I'm at my girlfriend atm and I always forget to log myself in here :D

regards
SoF

[SoF]

1. AOCM here in germany was so great fun and best oc show I've ever been (not that there have been many but can't be better than that) - ln2 never ended, dice as well, chips were good, systems ran good, Fr3ak made WR on E2140 on the same table - what else should an overclocker want?
I teamed up with blackpearl from Awardfabrik and we really worked well together :toast: one of the best days beside cebit this year - so here we go with some results. unfortunatly we only had short runs due to mainly preparation and contest time schedule reasons, but we made the best of it ;)

LN2 Results:

1m 9.578s 5400 MHZ 1.85V 1:1 4-4-4-4 - we even had 9.4XXs with 5445MHZ but I took too long to save the screen (yeah I was an idiot in this moment, additionally I did not had my own keyboard what totally made me crazy from time to time ^^)

http://www.casextreme.net/pixx/benches/e6850/ln2/9.5s.jpg


4m 59.641s ~5300 MHZ 1.85V 1:1 4-4-4-4 (not sure anymore which run it was, was only to keep the cpu "warm" ;) )

http://www.casextreme.net/pixx/benches/e6850/ln2/4m_sub1min.jpg


32m 5202 MHZ 1.85V 1:1 4-4-4-4
10min 28s (unfortunatly the one and only tested before we had to change to ddr3 for the am3 contest on AOCM)

http://www.casextreme.net/pixx/benches/e6850/ln2/32m.jpg

[DEVIL K-ce]

Super clocks, super CPU and not optimalized Windows :p: for PI ;)

Congrats for adventure with this toys :up:


Martin

[SeLecT]

Nice results SoF!

I hope to be at the next AOCM :) I see you have a lot of fun there!

[SoF]

...and not optimalized Windows :p: for PI ;)
...

Nope wrong - it was new RAM which was not running as fast as my GSKill I had the feeling...was the same windows I did 10.266s @4950 MHZ.
Just different Ram 10.266 @5050 MHZ...didn't had the time to test the few bios ram settings which are not adjustable with memset - but on DS3P you have to do it else Pi times are low...Gigabyte P35 issue.
All in all we only had an hour or so for benching pi before the AM3 came close.
Really sad we always had to stop after less than 2 hours...isolation in the box was so good we could have benched all the day.

Here is the 9.484s run on 5445 MHZ where I took too long to save (that screen was frozen :mad: )

http://img409.imageshack.us/img409/7325/sofspitl1.th.jpg (http://img409.imageshack.us/my.php?image=sofspitl1.jpg)

[Hyperhorn]

Nice LN2 results, hwboints profited ;)
Still tired? :p:

[SoF]

well, well starting to get better :)
Should go sleeping, 1 o'clock in the morning again ^^

Yeah all in all we made ~100 HWBot Points with thoose runs, going to improve that with BlackPearl maybe sooner than we first thought ;)

[saaya]

wow, very nice sof! :toast:
didnt see this before :D

[SoF]

how could you miss that :p: Was our test run on the E6850 before switching to AM3 DDR3 bench setup. Haven't you heard me screaming when I failed to save that damn 9.484s run? :D :D :D
Thanks again to you for helping us with the basic settings on the P5K3 - maybe we wouldn't have done it in time without your help :toast:

[MrSeanKon]

Hey SoFoklis I miss you!
Congrats with your Intel based system! :clap:
No more AMDs? :D
LOL do you like my avatar? :p:

[SoF]

Thanks, that avatar is funny =)

Well, well I still have my K8NXP-SLI laying around here with a 3500+ ^^
And I won AM2 board from gigabyte and 4 GB corsair dominator on 1. AOCM so still some AMD parts around here but still thinking about what to do with all these things ;)

[dinos22]

good work man

you are also very lucky with the FSB you can get from your chip

my one benches 4.9GHz easy (32M SuperPi) with SS but FSB hits hard at 552MHz :(

tomorrow i find out how well it will fair in the comp on DICE (fingers crossed it increases the FSB limit)

[PcCI2iminal]

crazzy FSB ,great work SOF

:clap:




tomorrow i find out how well it will fair in the comp on DICE (fingers crossed it increases the FSB limit)


GL my friend
my old E6850 week 23 just did 500 on air and 533 on ice :(

[saaya]

how could you miss that :p: Was our test run on the E6850 before switching to AM3 DDR3 bench setup. Haven't you heard me screaming when I failed to save that damn 9.484s run? :D :D :D
Thanks again to you for helping us with the basic settings on the P5K3 - maybe we wouldn't have done it in time without your help :toast:

i was just joking :D
btw, i put so much enthusiasm into fine tuning your ln2 box and you just dumped it :,( just kidding hahaha :D

no worries, i was glad to help :)
Did you have time to try that tref setting in the memset version i gave you?
herve said that it should ive a nice boost, similar to trfc.
hahah i remember when you tweaked the trfc the first time and ran am3 again and couldnt believe it helped that much :lol:

[SoF]

yeah it was trfc 48 and +50 MHz cpu and gave almost 4 or 5k boost iirc :shocked:
Your idea with the speaker in the edge worked so fine :up: Was fun to build that up with you, we really had a good time there :toast:
I trashed it to do it again with you another time :rofl:

Btw I shot you during work :yepp: :cool: :D

http://67.90.82.13/forums/attachment.php?attachmentid=65413&stc=1&d=1191776690

good work man

you are also very lucky with the FSB you can get from your chip

my one benches 4.9GHz easy (32M SuperPi) with SS but FSB hits hard at 552MHz :(

tomorrow i find out how well it will fair in the comp on DICE (fingers crossed it increases the FSB limit)

thanks, I did 600 FSB on ss and 605 1m stable LN2 - already preparing the next session to break 5.5 GHZ :)
gl with your E6850 fsb!

crazzy FSB ,great work SOF

:clap:


thanks, I am really so lucky with this chip :D

[saaya]

hahahah good snapshot of me working on that thing in colibri style ^^
yeah the speaker was awesome ahaahhah :D

Im definately looking forward to building another box and bench ln2 with you, let me know if you have time and some new hw to torture :D

[Hyperhorn]

Btw I shot you during work :yepp: :cool: :D

You tried it. :rofl:
Camera 0
saaya 1
He's going quicker synchronously to the hardware. ;)

[SoF]

hahahah good snapshot of me working on that thing in colibri style ^^
yeah the speaker was awesome ahaahhah :D

Im definately looking forward to building another box and bench ln2 with you, let me know if you have time and some new hw to torture :D

That was another way of "hacking the box" LOL
BlackPearl already builded a new box - nice work he did :up:

http://www8.file-upload.net/thumb/09.10.07/5345y1.JPG

We are preparing the next run, depending on what we plan I'll send you a pm ;)