QX6800 G0 L712A638 (4200MHz on air)

[SF3D]

I just tested my new QX6800 ES. I have to say that I'm impressed.

I can bench Wprime at 4GHz (1.56V) on aircooling. It can do 3.7GHz with default voltage 1.32V. G0 rocks! :D

Setup: Crappy ASUS cooler on cpu.
http://img512.imageshack.us/img512/3143/jhyne8.th.jpg (http://img512.imageshack.us/my.php?image=jhyne8.jpg)

CPU:
http://img508.imageshack.us/img508/2522/intelconfidentialxf6.th.jpg (http://img508.imageshack.us/my.php?image=intelconfidentialxf6.jpg)

Max MHz 1.6V(4200):
http://valid.x86-secret.com/show_oc.php?id=221101

Max fsb on air (490):
http://valid.x86-secret.com/show_oc.php?id=221102

Wprime @ 4GHz 1.56V (aircooled) Bad time for some reason? Maybe too hot.

http://img110.imageshack.us/img110/7707/wprime4ghzlu0.th.jpg (http://img110.imageshack.us/my.php?image=wprime4ghzlu0.jpg)

[newls1]

Holy SMOKES

[Solarfall]

i hate you...:D i would have to sell one of my kidneys so that i could afford to buy that chip..
but anyways sweet clocks bro :toast: ..
there on earth do people find these ES cpus??
is lukes cascade working ??? you need to get that chip under it asap ;)

[graysky]

Can you post a coretemp or speedfan screenshot after 30-40 minutes of load @ these settings? I'm curious what your temps are...

[strange|ife]

those asus coolers are actually very good. i saw a round up in cpu power, and on a website. they rated the silent knight just above tuniq tower and below ultra 120

[Nazu]

those asus coolers are actually very good. i saw a round up in cpu power, and on a website. they rated the silent knight just above tuniq tower and below ultra 120
Yeah but that's with max fan speed. Tuniq and Ultra 120 can do same temps with less db. korrrhonen nice g0 you got there :up:

[jeffyjaixx]

G0 ftw.

Nice results.

[Boble76]

:shocked:
You got the Good ONE my friend! Nice results with "that" CPU-cooler.
Kick it ass!

[SF3D]

Can you post a coretemp or speedfan screenshot after 30-40 minutes of load @ these settings? I'm curious what your temps are...

:D I don't think that this is stable enough to do so. I didn't test 1024m, but running Wprime 32m, all cores were between 75-84 c.

Ambient temperature were ~25c

Next I will try my cascade. It's not 100% working at the moment, but I hope to achieve 5GHz :yepp:

[96redformula]

Great clocks!

What is the best you can do fully stable?

Sidenote* That processor is going for $1500 on newegg right now :eek:

[Icer]

Very nice!

[K.I.T.T.]

Sweet chip mate :D

[Solarfall]

:D I don't think that this is stable enough to do so. I didn't test 1024m, but running Wprime 32m, all cores were between 75-84 c.

Ambient temperature were ~25c

Next I will try my cascade. It's not 100% working at the moment, but I hope to achieve 5GHz :yepp:

cant wait for the cascade runs... lets hope that you will get +5ghz :rocker:

[hecktic]

Is it an engineering sample chip?

I dont see a intel spec sheet..so....

not sure about the ES but the non ES has a TDP of 130watts!

[SF3D]

Yes, this is ES chip.

I will test this under my cascade today or tomorrow.

[s0lid]

Where hell u get these ES cpus?
I wanna too :yepp:

[BulldogPO]

Great, spank that CPU real hard under cascade :D

[eva2000]

Woah very nice cpu .. how about wprime 1024M ?

my Xeon X3230 with wPrime 32M + 1024M @4000Mhz at 1.64v and max cpuz validation also at 1.64v of 4112Mhz!

water cooled of course heh

http://fileshosts.com/intel/Asus/BlitzExtreme/g4storm/x3230/ocz/platinum/14400/10x/1_2divider/400-800_76515_448774_1.6875-x597-1.4-1.55-1.9-1.125-1.7_x67/wprime_all.png

http://fileshosts.com/intel/Asus/BlitzExtreme/g4storm/x3230/ocz/platinum/14400/10x/1_2divider/411-822_76515_448774_1.6875-x597-1.4-1.55-1.9-1.125-1.7_x67/cpuz_validated.png

[sdumper]

Very nice results looking forward to some cascade action :)

[icon57]

nice cpu you got there!

[boblemagnifique]

Good Cpu :D yeah !!!

[pinto]

this one from bob too

http://img520.imageshack.us/img520/8460/wiprime1tk8.jpg (http://imageshack.us)

[boblemagnifique]

Same Cpus , Same Overclocking !!!

I had make a good selection :D

[Emmett]

SF3D,

Interesting, I have an L712A200 Q6600 that is a B3 Step.

I have the deluxe Also, Could you post your bios settings?

Emmett