QX 6850 G0 @ 4103mhz w/Asus P5K Premium all air

[Dynasty]

QX 6850 G0 cooled by xp-90c/tornado 90mm.
Asus P5K-Premium
TG 5300 DDRII
XFX 8800 Ultra
Silverstone OP1000W psu

1.56Vc in pc probe II
2.40 Vdimm

G0 are just that much fun to overclock and run cooler especially for quad core is nice too see....:yepp:
im just doing quick 1M runs and going on to next cpu testing....I will try and post alot more with
quad core especially for 3D 06, cinebench etc..

http://img258.imageshack.us/img258/3448/41039mhzqx6850g0156vc1mrc2.gif (http://imageshack.us)

http://img46.imageshack.us/img46/1755/12562sqx6850g0156vcvy1.gif (http://imageshack.us)

[Florent]

Nice results

G0 are very good on Air

[Solarfall]

very nice overclock my friend :toast: ..looking forward on those 3d tests

[M3kk]

Max prime? :P

Run pi32m.

[Icer]

But will a retail G0 quad do this well...hopefully we'll know soon.

[eklipze]

real nice yes, i hope the retail are the same ^^ hehe

[DMH]

Oh my amazing 4Ghz on Air with a 4core let's hope the Q6600 can also do that:D

[Dynasty]

Oh my amazing 4Ghz on Air with a 4core let's hope the Q6600 can also do that:D


if you get an Q6600 aim for an G0 and grab P5K-prem.. you should have good chance of this happening....by far one of the best and most fun board to overclock is the P5K-Prem...0203/0204 bios adds the FSB strap to NB option..

nice board overall wish 680i boards would do
what P35 can do for the quads.

[blossa]

Nice clocks! It is for sure fun to see theese QX6850 @+4GHz EASILY only with air cooling. ;)

Have you had any problems with dividers with this CPU on your board? I have the DFI 965P and I recently noticed that the dividers do not work anymore. :( It might be because of the BIOS-version though.

And last, no problems with FSB on your board I guess? I did 495-something on my board.

[Dynasty]

Nice clocks! It is for sure fun to see theese QX6850 @+4GHz EASILY only with air cooling. ;)

Have you had any problems with dividers with this CPU on your board? I have the DFI 965P and I recently noticed that the dividers do not work anymore. :( It might be because of the BIOS-version though.

And last, no problems with FSB on your board I guess? I did 495-something on my board.

not with this qx6850, funny you mention this problem about dividers not responding on dfi 965p
I know someone else with similar issue...could be isolated matter though....

[Supertim0r]

they look promising !

nice chip for sure

[DMH]

if you get an Q6600 aim for an G0 and grab P5K-prem.. you should have good chance of this happening....by far one of the best and most fun board to overclock is the P5K-Prem...0203/0204 bios adds the FSB strap to NB option..

nice board overall wish 680i boards would do
what P35 can do for the quads.

I will have to stick whith my DS4:shakes:

[Bootsy]

Nice Dynasty!! How about some shots with a 490+ fsb as I am wondering if these new quads will be any easier to run at high fsb.

[blossa]

DFI Infinity 965P:
http://loppmarknader.se/blossas_album/albums/userpics/10001/495_79fsb.png

[[XC] riptide]

^^^^^ WTF> Whats with the run-off at the 'Specification' line entry?

[bluep3ace]

is the xp-90 still this strong of a cooler?

[Blauhung]

Oh my amazing 4Ghz on Air with a 4core let's hope the Q6600 can also do that:D


if you get an Q6600 aim for an G0 and grab P5K-prem.. you should have good chance of this happening....by far one of the best and most fun board to overclock is the P5K-Prem...0203/0204 bios adds the FSB strap to NB option..

nice board overall wish 680i boards would do
what P35 can do for the quads.

Also, be very aware of the fact that the lesser binned G0 chips (such as the Q6600) are the high volume parts. The Q6600 is getting the same quality chips that would have been E6400/E6600's on B0, they run cooler but chances are the same headroom is not there

[xgman]

Nice Dynasty!! How about some shots with a 490+ fsb as I am wondering if these new quads will be any easier to run at high fsb.


I've had my QX6850 sample above 600 whereas my old x6800 couldn't do that. 490ish with a 9 multi seems to be the sweet spot for me with phase on this one.


Dynasty seems to have a good one here. I never tried mine on air. probably closer to 4 than 4.1 though I'm guessing. I kind of suspect retails may be as good or better this time.

[And 1]

Dynasty, do you have 3ds max? Could you report some of your benchmarks in rendering please?

If interested:

http://forums.cgsociety.org/showthread.php?f=23&t=508539
(My times are 23, 58, 122, & 402 seconds)

http://www.3dbuzz.com/vbforum/showthread.php?t=111196
(My AMD FX-57 at 3ghz does this scene in 34s)

Those threads/forums host the competition. Download the .max scene file.