air cooled E6850 week23 4100mhz->Pi32m, 4ghz->prime95 :)

[PcCI2iminal]

the good news :)


http://img227.imageshack.us/img227/5029/024copykz3.jpg
1.6v
http://img460.imageshack.us/img460/947/4100pi32mbzl6.jpg
1.58v
http://img460.imageshack.us/img460/726/4ghzprimeokmz3.jpg

3600mhz @ 1.3v

max screen at 1.65v
http://img461.imageshack.us/img461/7392/4260mhzcpuzbn3.jpg
http://valid.x86-secret.com/show_oc.php?id=219533

and the bad news
FSB wall ->500FSB :(

i will give some cold

CPU->E6850 L723A
MB->Gigabyte P35-DS4
Cooler->Thermalright Ultra 120 eXtreme
Fan->San Ace F12-PWM
RAM->A-data 8500 EE
PSU->Giga-EZ 1000w
Room temp->26C

[StyM]

nice.. :D

[safan80]

nice.. so what's you 1M superpi time?

[rithina]

Very new cpu. ouch..sad to hear wall is at 500 fsb...but 3.6 at 1.3v is excellent for 24/7 for most of u

[Cordovader]

Very nice PcCI2iminal :toast:

It´s curious because my E6850 E0 does almost literally the same on air with an Ultra Extreme too:

Max validation at same vcore
http://img442.imageshack.us/img442/9315/cpu4259ks7.png

Almost the same Spi 32m (23mhz more)
http://img71.imageshack.us/img71/4092/32m412ghzcs3.th.jpg (http://img71.imageshack.us/my.php?image=32m412ghzcs3.jpg)

And same stability, 3,6ghz 1,3v
http://img240.imageshack.us/img240/5689/1hprime36ghz13vso1.th.jpg (http://img240.imageshack.us/my.php?image=1hprime36ghz13vso1.jpg)

It´s nice to see that the retail one´s are so good too :D

[Endre]

Excellent results by both of you! I've just ordered a similar system to the OP, a E6850, DS3P (DS4 with less cooling), and some cheap Ballistix 5300. Can't wait when I see these results. The 6850 seems like a better choice than 6750 if you wanna have a "guarantee" to reach frequencies at least close to 4G stable with highend air or lowend water.

A shame with the FSB wall, I'm glad I didn't order a lower MP chip.

[HamidFULL]

very nice ... and idle and load temp??

[ceevee]

Great news. E6850 should be here as well in a couple days.

I'm trying some new stuff with this build, went with a DDR3 only board and going to try a TEC cooler for the CPU.

Looking to get 3.8-4.0Ghz 24/7

[PcCI2iminal]

Very nice PcCI2iminal :toast:

It´s curious because my E6850 E0 does almost literally the same on air with an Ultra Extreme too:




hehehehe

nicely done mate :)

what fan are you using?


very nice ... and idle and load temp??

I really don`t know ,the CoreTemp does not report the temps right with this cpu
idle < room temp :S
but the Thermalright`s base is not hot @ 4ghz



A shame with the FSB wall, I'm glad I didn't order a lower MP chip.


Unforunately the chip FSB walled @ 500 fsb on air(6x,7x,8x)

but it`s time to break some walls

http://img489.imageshack.us/img489/625/e68504500mhzbiostempat4.jpg

:)

[eva2000]

Nice... but shame about the FSB wall :(

nearly everyone of my cpus is walled at 490-514FSB on water cooling LOL

bought a 2nd hand E6600 L709A958 to play with hope it has a higher FSB wall :D

[PcCI2iminal]

eva2000

i want a 600FSB+ chip :(
and good luck with your "new" E66 :)



nice.. so what's you 1M superpi time?
I'll try that. It may take a day to re-run them all

[PcCI2iminal]

http://img247.imageshack.us/img247/3007/imagemsg8.jpg
http://img247.imageshack.us/img247/3299/4800mhzokfi1.jpg

and a bit more for screen hehehe
http://valid.x86-secret.com/show_oc.php?id=219654

no more than 534FSB (6x,7x,8x)

cooling->dice
vcore->1.74v

[Dynasty]

nice work with the e6850......:)

[eva2000]

eva2000

i want a 600FSB+ chip :(
and good luck with your "new" E66 :)



I'll try that. It may take a day to re-run them all thanks

looks like you managed to squeeze a bit more out 534FSB is decent and 4.7ghz is nothing to complain about :D

what's the max on DI @~1.66v vcore ??

[over@locker886]

Great chip my friend!:up:

But low fsb wall is little sad..:(

[PcCI2iminal]

here George

http://img359.imageshack.us/img359/7239/4700mhzpi1mbyg5.jpg

1.65 Bios
1.62v real


looks like you managed to squeeze a bit more out 534FSB is decent and 4.7ghz is nothing to complain about

:)

you are rite ,nothing to complain ,I`m very happy with my new 4ghz Conroe

Bit of a Dilema.
put this cpu in my main machine
or keep my quad @ 3400mhz :S

[over@locker886]

here George

you are rite ,nothing to complain ,I`m very happy with my new 4ghz Conroe

Bit of a Dilema.
put this cpu in my main machine
or keep my quad @ 3400mhz :S

I vote about 4Ghz Conroe;)

[Solarfall]

excellent numbers brotha.. what about 3Dmarks

[kiwi]

Great on air/water and maybe phase but rather sad for xtreme cooling and benching :( Such chips would do at least 5Ghz on DICE if not fsb wall

Thanks for info :)

[PcCI2iminal]

RD600 + Intel cooler box(QX6700)

http://img165.imageshack.us/img165/4042/006copysy9.jpg
http://img66.imageshack.us/img66/2310/untitledwb3.jpg

3.78GHZ was all I could get and the E6850 works fine on 1222 Bios

Room temp @ 24C

:D

[luihed]

Great on air/water and maybe phase but rather sad for xtreme cooling and benching :( Such chips would do at least 5Ghz on DICE if not fsb wall

Thanks for info :)

It is a great cpu for aircooling but thats about it.... all I can say is this is not what you want if you like superpi cos its soooooo slllooowwww......

@3600mhz ( 514x 7 )

E6600= 13m11s
E6850= 13m39s :(

Mine is L722a and on water itll do 4300mhz+ and fsb@ 545fsb.... good numbers but my E6600 can do the same..... kinda dissapointing

[nugzo]

It is a great cpu for aircooling but thats about it.... all I can say is this is not what you want if you like superpi cos its soooooo slllooowwww......

@3600mhz ( 514x 7 )

E6600= 13m11s
E6850= 13m39s :(

Mine is L722a and on water itll do 4300mhz+ and fsb@ 545fsb.... good numbers but my E6600 can do the same..... kinda dissapointing

I wouldn't be disapointed. You have a very special E6600 if it does 4.3. I just ordered a 6850 from the egg. be here tuesday. My goal has been 4ghz 24/7 on good water. I've been able to make it to 3.9 on my 10th E6600. Maybe this 6850 will finally get me there.

[zsamz_]

i doubt if many e6850 wont reach 4.0
never got to test with my p35 board died as soon as i put it in lol
but my old p5b got it to 4.0 stable on first try with my zalman
my 120 extreme came in 30c load

[erwinz]

It is a great cpu for aircooling but thats about it.... all I can say is this is not what you want if you like superpi cos its soooooo slllooowwww......

@3600mhz ( 514x 7 )

E6600= 13m11s
E6850= 13m39s :(

Mine is L722a and on water itll do 4300mhz+ and fsb@ 545fsb.... good numbers but my E6600 can do the same..... kinda dissapointing

so you got an E6850..

wow so 1333 cpu's are slow in pi..

[Cordovader]

hehehehe

nicely done mate :)

what fan are you using?

The retail fan that comes with the Tuniq tower :)

My cpu tops out on air at 538fsb +/- But days ago i did a little test with LN2 (the board, unmoded, hanged and i had to stop early) and it changed :p:

1m 5133mhz 1,68v
http://img54.imageshack.us/img54/4725/1m5133hx3.th.jpg (http://img54.imageshack.us/my.php?image=1m5133hx3.jpg)

http://img54.imageshack.us/img54/6438/ln2011pnb2.jpg

Right now i´m priming at 3,2ghz 1,19v, 20m so far :p:

Greetings :toast:

[Gautam]

It is a great cpu for aircooling but thats about it.... all I can say is this is not what you want if you like superpi cos its soooooo slllooowwww......

@3600mhz ( 514x 7 )

E6600= 13m11s
E6850= 13m39s :(

Mine is L722a and on water itll do 4300mhz+ and fsb@ 545fsb.... good numbers but my E6600 can do the same..... kinda dissapointing

So lui, is it fair to say then that E6600's are slower in Pi than an X6800 (http://www.xtremesystems.org/forums/attachment.php?attachmentid=60190&stc=1&d=1181068146)? ;) I believe the G0's are equal to any other CPU in Pi, it's all about the optimization as always. ;)

Very very nice CPU clocks, especially the prime on air, PCCriminal. :thup:

[PcCI2iminal]

So lui, is it fair to say then that E6600's are slower in Pi than an X6800 (http://www.xtremesystems.org/forums/attachment.php?attachmentid=60190&stc=1&d=1181068146)? ;) I believe the G0's are equal to any other CPU in Pi, it's all about the optimization as always. ;)

Very very nice CPU clocks, especially the prime on air, PCCriminal. :thup:

I believe the same, B3 = G0



Mine is L722a and on water itll do 4300mhz+ and fsb@ 545fsb.... good numbers but my E6600 can do the same..... kinda dissapointing
It is a great E6600 ,keep it :D

I got a nice E66 like yours,good for air (3900mhz ,room temp @ 16C ) with a high level FSB @ 580 on ice
and my new E6850 does 4ghz (room temp 25C )but the fsb wall is very low .. kinda dissapointing
anyway I`ll keep both and I will try to find another E6X50 with a great FSB potential

Cordovader

great clocks ,congrats :)


Right now i´m priming at 3,2ghz 1,19v, 20m so far

thats nice

mine does 3400mhz @ 1.26v on Intel cooler box :)
http://img478.imageshack.us/img478/8784/untitledmd5.jpg

[Cordovader]

mine does 3400mhz @ 1.26v on Intel cooler box :)[/IMG]

Very nice :D, yours have more merit cause i´m using the Ultra eXtreme :p:

I hope you cand find another E6850 with a better FSB :toast:

BTW, this is what i did finally:

1H Prime Large FFT´s 3,2ghz 1,176v
http://img527.imageshack.us/img527/125/1hprime32ghz1176vhi8.th.jpg (http://img527.imageshack.us/my.php?image=1hprime32ghz1176vhi8.jpg)

[PcCI2iminal]

time for some water


http://img209.imageshack.us/img209/4279/4144mhzpi1mbjk3.jpg
http://img209.imageshack.us/img209/3245/4150mhz3d01gt7.jpg
http://img442.imageshack.us/img442/2426/4380mhze6850watervh0.jpg
http://valid.x86-secret.com/show_oc.php?id=222292

in this conditions the Reserator is only good for short runs,the water gets warm very fast...
this water system is not designed to manage that clock/vcore.

CPU->E6850 week23 1.65v
MB->P35-DS4
RAM->A-data 1066+ EE
Cooler->Zalman Reserator Rev1
Block->ZM-WB2 Gold
Coolant->H2O
VGA->Gladiac 6800GS 500/1300
FAN->San Ace F6-PWM
HDD->Hitachi 40gb
PSU->Giga-Ez 1000w
Room temp->26C


http://img209.imageshack.us/img209/4156/57190734mw4.th.jpg (http://img209.imageshack.us/my.php?image=57190734mw4.jpg)http://img442.imageshack.us/img442/999/17887711zr3.th.jpg (http://img442.imageshack.us/my.php?image=17887711zr3.jpg)http://img442.imageshack.us/img442/5303/15198659sx3.th.jpg (http://img442.imageshack.us/my.php?image=15198659sx3.jpg)http://img442.imageshack.us/img442/4299/99900094xu7.th.jpg (http://img442.imageshack.us/my.php?image=99900094xu7.jpg)