E6850 Retail Water

[road-runner]

Got my E6850 today I have not had much time to fool with it yet but I did run OCCT at 4Ghz 1.55 vcore. 4401 (http://valid.x86-secret.com/show_oc?id=218126) at 1.65 volts. TAT does not report the temps right with this cpu or it may be the board? It read right with my E6600. It was reading idle 18-20c in 25c ambient and 32-33c load. I am folding with the SMP core at 4Ghz

http://i135.photobucket.com/albums/q121/road-runnerOCC/4005_OCCT.png

[Start]

*Drools 4.4Ghz*

[road-runner]

Thats not stable, its a suicide run at 1.65 volts

[safan80]

*Drools 4.4Ghz*

don't you mean 4.004Ghz

[Start]

Thats not stable, its a suicide run at 1.65 volts

There might be potential with more tweaking.

don't you mean 4.004Ghz

I was refering to the sucide run ;)

[michaLcoughliN]

4ghz is still pimp :D

[Solarfall]

nice.. your chip performs pretty much the same way as my e6600 :D

[OBR]

Is it fully Orthos stable at this freq? If not, what max stable freq is?

[road-runner]

Is it fully Orthos stable at this freq? If not, what max stable freq is?

I have not had time to test it yet, I will test it though...

[Grinch]

where did you get cpu from?

[road-runner]

where did you get cpu from?

http://www.allstarshop.com/shop/product.asp?ad=fg&pid=18149

[erwinz]

nice.. :)

mm... can you please try 8x500 :)

and check your stability please.. :)

thanks

[Grinch]

http://www.allstarshop.com/shop/product.asp?ad=fg&pid=18149

great! that's just where I ordered my 6850 from today...:up:

[G H Z]

Very nice chip road-runner. I wonder if these can do over 600 FSB, everything would be perfect then ;)

[road-runner]

If I go any higher than this I get reboots after about an hour of running. I even tried up to 1.6 volts. This is 1.55 volts.

http://img386.imageshack.us/img386/5229/orthosup2.png

[irangan]

mind telling me your processor batch code?

[road-runner]

mind telling me your processor batch code?

No I sure dont, its L718A190

[irangan]

Thanks.... Something to compare with my E6850. It is coming in 2 days time. Hehe

[michaLcoughliN]

nicely done road runner

[road-runner]

Very nice chip road-runner. I wonder if these can do over 600 FSB, everything would be perfect then ;)

I tried to boot at at 566X7 and no go. I think my 6400 HZ can not go that high. Currently running 500X8 for 45 minutes...

[Console]

I tried to boot at at 566X7 and no go. I think my 6400 HZ can not go that high. Currently running 500X8 for 45 minutes...

They should do 566 fine as long as you give them some volts =)

[Gautam]

The board is what'd become difficult at such a level.

[road-runner]

Something causes a random reboot occasionally even at speeds that run orthos 11 hours or OCCT and have been folding for 24/7, it may go a day or two with no problems then just reboot. I am not sure what it is yet, any ideas?

[Dynasty]

4400mhz screenie very nice cpu m8......:clap:

[K.I.T.T.]

Is that 33*C dual load with 1.6v? Nicely done mate :up:

[eternaljammer]

4400mhz screenie very nice cpu m8......:clap:

Indeed!

[hausner]

Can you run 3dmarks 4.1ghz and more?

[sick_g4m3r]

is this a G0?

[Dynasty]

yep, its an G0

[LivingL@rGe81]

Are there any retail 6850's that aren't G0 stepping?

[chavalcito]

BTW, the have them at Directron in stock right now!

[Dynasty]

Are there any retail 6850's that aren't G0 stepping?

doubt it......

allstarshop has E6850 G0's in stock.....start clicking to cart....:D


http://www.allstarshop.com/shop/product.asp?pid=18149&sid=F3TC99W2K5RJ9MV1EFA10LNWJEB65TW9

[bro20000]

Just cant wait for one of these!

[bro20000]

Gotta a problem am using a abit Quad Gt with this processor and using the standad muiti is fine 9x! When i change to 8 or 7 i get C1 come up on the board any ideas what to do!

[chavalcito]

Gotta a problem am using a abit Quad Gt with this processor and using the standad muiti is fine 9x! When i change to 8 or 7 i get C1 come up on the board any ideas what to do!

I know there is a fix for that, a patch of some sort. I wish i could remember where I read it. Luckily for me, it can be completely disabled in the 680i BIOS.

[bro20000]

it dont do it on 9x i just wanted to see what the board could do! Currently testing a 3.3 at 1.31 its going well expect for that muiti thing! Anyone know what the best p35 board out there for E6850!

[chavalcito]

Gigabyte DQ6

[Peepaw]

http://www.allstarshop.com/shop/product.asp?ad=fg&pid=18149

Sweet, I've got one coming from them on Tues.
Going to try it in my p5b first and see what she can do with it.:D

[bro20000]

There well worth the money! Just looking for a ddr3 board now to go with it!

[road-runner]

Can you run 3dmarks 4.1ghz and more?

I ran 05 with it a 4100Mhz I have not tried any of the others or any other speeds yet but Forum Wars starts tomorrow night at Midnight I will be pushing it then...

[Terminal 8]

Something causes a random reboot occasionally even at speeds that run orthos 11 hours or OCCT and have been folding for 24/7, it may go a day or two with no problems then just reboot. I am not sure what it is yet, any ideas?

I'd *like* to say its a board quirk most likely, probably something with the vCore stability (possibly PSU).

[Grinch]

running mine at 3.5ghz at "auto" vcore...*-)

[chavalcito]

running mine at 3.5ghz at "auto" vcore...*-)

Auto almost always seems to use more voltage than needed with that chipset.

[road-runner]

I just ran another suicide at 1.65 volts. I made it to 4427 (http://valid.x86-secret.com/show_oc.php?id=221178)

[chavalcito]

1.65 is definitely suicide!

[hecktic]

I just ran another suicide at 1.65 volts. I made it to 4427 (http://valid.x86-secret.com/show_oc.php?id=221178)

very nice :clap:

[cuprasport]

the stepping ont hese chips isnt go its just the revision and atm the only released revision is go

[Grinch]

http://s2.supload.com/thumbs/default/_MG_2158.jpg (http://s2.supload.com/free/_MG_2158.jpg/view/)


have an "ICE COLD BEER" everybody!

[jabski]

thanks grinch lol

[hecktic]

rofl grinch..

to the OP, please post your batch number and other details from the box.

[road-runner]

rofl grinch..

to the OP, please post your batch number and other details from the box.

Here you go...

http://img440.imageshack.us/img440/8830/dsc00239gh8.jpg

[Grinch]

looks familiar...*-)

http://s2.supload.com/files/default/_MG_2172.jpg

[michaLcoughliN]

ide sy 1.5 is the highest ide ever stress on a cpu. 1.6 is definetaly suicide :P

congrats on the 4.4 :)

[Solarfall]

ide sy 1.5 is the highest ide ever stress on a cpu. 1.6 is definetaly suicide :P

congrats on the 4.4 :)

hmmm well what do you call when people run there chips over 1.7v :D

[hecktic]

Here you go...

http://img440.imageshack.us/img440/8830/dsc00239gh8.jpg

Thank you sir.

hmmm well what do you call when people run there chips over 1.7v :D

That would be called "Extreme" :ROTF:

[michaLcoughliN]

hmmm well what do you call when people run there chips over 1.7v :D

hmm im sure they dont use it 24.7 usage. since my understanding with voltages. The more you run through the cpu itself is what damages the chip.
Yes heat also isn;t a good thing either but you have to remember, the Voltage you throw through it obviously take a beating to the cpu itself.

[Solarfall]

@hecktic hehe i kinda saw that coming ;)

@michaLcoughliN well yes that is true in most cases, but i do know few dudes that use 1.7v for day to day use.. and yes they have c2d chips.. :D

[fotis1972]

Hello to everyone, i bought the e6850 with Batch: L718A202 do you think it will be the same than yours because the 3 last digits are diffferent?? L718A198
I didn't setup it yet because i'm waiting for few things
Thanks a lot
Fotis

[Xilikon]

Hello to everyone, i bought the e6850 with Batch: L718A202 do you think it will be the same than yours because the 3 last digits are diffferent?? L718A198
I didn't setup it yet because i'm waiting for few things
Thanks a lot
Fotis

I think the last 3 digits matter less. What matters more is the 5 first digits IMHO.

[road-runner]

Ran a dual superpi at 4200...

http://img158.imageshack.us/img158/4732/superpidual1mjn8.png

[Infa]

that is a terrible super pi score...

strange... you should be around 12.5 - 12.8

[road-runner]

They were both run at the same time.

[Subsider]

Quote:
Originally Posted by michaLcoughliN
ide sy 1.5 is the highest ide ever stress on a cpu. 1.6 is definetaly suicide :P

congrats on the 4.4

Quote:
Originally Posted by Solarfall
hmmm well what do you call when people run there chips over 1.7v

Ive been running a e6600 @3700mhz with 1.62v actual for a coulple months now ...:D
no problems so far and temps are good (watercooled)
Ive also benched with up to 1.74 :eek:

[JohnnyV]

They were both run at the same time.

What's the score then with 1 run only?

[road-runner]

What's the score then with 1 run only?

I ran one at 3960 and I think it was 12.6 something

[Hazzan]

I just ordered E6850 L719A844 on the way in my house.....any body know about OC performance ? thats GO stepping ?

[bro20000]

Should be a good chip no one can say all depends on other components to!

[jacek]

I ran one at 3960 and I think it was 12.6 something

Would u like to say sth about your temps at 3.96?
i have E6850 (L719A773) and I am able to push the CPU to 4Ghz, Vcore=1.63V, stable. The Cpu is Water cooled. With my setup it is impossible to keep temp below 60C. Running about 33c at idle and around 63-64c load.

[lazy]

seems like im the only one who has the L719B stepping here =/ is it safe to run the computer on 1.63 for 24/7 use? ill only be playing CS:S

[road-runner]

What's the score then with 1 run only?

Here is one only...

http://i135.photobucket.com/albums/q121/road-runnerOCC/SP32-20070730-104712.png

[Grinch]

I guess mine is not as good as some....even though I have the L718A190 which is the same as a few others...mine will boot at 4ghz...but will reboot after a few mins in windows....maybe I am not doing something right in the bios?



edit****I increased the shutdown temp to 80C and this is the longest so far I have been able to go using 4ghz

edit****could not even run instance of super pi...

[road-runner]

I guess mine is not as good as some....even though I have the L718A190 which is the same as a few others...mine will boot at 4ghz...but will reboot after a few mins in windows....maybe I am not doing something right in the bios?



I increased the shutdown temp to 80C and this is the longest so far I have been able to go using 4ghz

May be the M.B, these new P35 are nice boards...

[xVeinx]

Here is one only...

http://i135.photobucket.com/albums/q121/road-runnerOCC/SP32-20070730-104712.png

Makes sense. Running only one allows for use of the entire cache, while doing two at the same time cuts the available cache in half.