View Full Version : Retail E6850 @4GB
clone38
07-16-2007, 06:07 AM
http://valid.x86-secret.com/show_oc?id=217674
E6850 @ 4GHZ
Product Code:- SLA9U "G0 Stepping"
Batch No:- L720A696
Pack Date:- 07/02/07
Motherboard EVGA 680i( P29 Bios)
4GB OCZ 9200 Flex ram (watercooled)
Cooling Loop 1
120.3 Thermochill rad with 3X SH Yate Loon`s on low
Pump D5
1/2" Black Tygon
Ram share`s the loop with a 8800Ultra Superclocked via Swiftech F barb`s.
Loop 2
120.3 Thermochill rad with 3X SH Yate Loon`s on low
Pump D5
1/2" Black Tygon
Cpu block (D-TEK FuZion ) /Northbridge(EK 680i) & southbridge(EK 1.1 nForce 4).
Cpu core volt 1.5v
Ram 2.1v
http://img.photobucket.com/albums/v293/clone38/E68504GB5HOURSORTHOSSTABLE.jpg
antonfrompresto
07-16-2007, 06:09 AM
Surely you mean at 4 GHz not 4 GB.
Envydia007
07-16-2007, 06:10 AM
nice temps @ full load.
Peepaw
07-16-2007, 06:12 AM
Very nice.:clap:
STaRGaZeR
07-16-2007, 06:24 AM
F*cking impressive. And the best of G0 stepping is that it´s still 65nm, can´t wait for 45nm Wolfdales and Yorkfields.
Envydia007
07-16-2007, 06:26 AM
OP, can you show a 3dmarks test with your set up?
erwinz
07-16-2007, 06:34 AM
http://valid.x86-secret.com/show_oc?id=217674
E6850 @ 4GB
Product Code:- SLA9U "G0 Stepping"
Batch No:- L720A696
Pack Date:- 07/02/07
Motherboard EVGA 680i( P29 Bios)
4GB OCZ 9200 Flex ram (watercooled)
Cooling
120.3 Thermochill rad with 3X SH Yate Loon`s on low
Pump D5
1/2" Black Tygon
Ram share`s the loop with a 8800Ultra Superclocked via Swiftech F barb`s.
Cpu core volt 1.5v
Ram 2.1v
http://img.photobucket.com/albums/v293/clone38/E68504GB5HOURSORTHOSSTABLE.jpg
very nice.. :) now we will be seeing 4 GHz.. 24/7 setup using water cooling or good air cooling.. :D
largon
07-16-2007, 06:36 AM
Nice. :up:
nice temps @ full load.G0 temp readings are off by ~15ºC
clone38
07-16-2007, 06:38 AM
Ment to say ghz :P
3DMark test will be done shortly as im still testing.
:D
erwinz
07-16-2007, 06:48 AM
Ment to say ghz :P
3DMark test will be done shortly as im still testing.
:D
maybe your testing if it can do 4GHz.. :)
hehehe but I think your not using the full potential of your memory module and the async capability of 680i motherboards.. :)
clone38
07-16-2007, 07:00 AM
Cant get me head around ram as it drive`s me crazy .
AndyM
07-16-2007, 07:21 AM
Congrats! 1st 4Ghz Orthos stable I've seen with no ape:banana::banana::banana::banana: voltages or superpi only stability. Now to make a decision on retiring my 6600 or not, lol.
adamsleath
07-16-2007, 07:26 AM
well; im following your lead.
i decided to try 1.5v core.
and i seem to be very stable at 445x9
dr0ops down to 1.45 during orthos.
i checked my bios temp and it says 35C @ 1.5v (asus probe) 1.47v bios
tat says 22C and ctemp says 19C (lol) - all idle temps.
...and asus probe gives yet another reading (lolx2)
looking at probe at max temp orthos it is 45c (which could mean anything) but nuthing alarming tempwise.
using my probing finger:
the nb is slightly warm and the tuniq base is barely luke warm :hehe:
my ambient is 20C
orthos still running...i'll let it get to 20 minutes...or so.
if it was a summers day at about 28C i suppose i wood be seeing/feeling some heat from the tuniq.
RPGWiZaRD
07-16-2007, 07:41 AM
How do you get 20C ambient in australia? I mean currently I have 27C room temp here. :confused: That's one reason I also think it might be wiser for me to choose one of these duals over quad cuz the quad temps will kill the chip during summer here as room temp is always between 25 - 28C during summer in this house, my neighbour on the other hand only has like 20C. :s
erwinz
07-16-2007, 07:41 AM
Cant get me head around ram as it drive`s me crazy .
you can do it man.. :)
your module can do ddr2 1100 cas 4 easy.. :) I guess aiming for ddr2 1000 cas 4 ist.. :D
adamsleath
07-16-2007, 07:44 AM
How do you get 20C ambient in australia? I mean currently I have 27C room temp here. :confused: That's one reason I also think it might be wiser for me to choose one of these duals over quad cuz the quad temps will kill the chip during summer here as room temp is always between 25 - 28C during summer in this house, my neighbour on the other hand only has like 20C. :s
it is the middle of our winter here :)
summer inside gets to about 28c...then i put the a/c on.
it is 16-18c in the mornings (brrr cold)
Brother Esau
07-16-2007, 09:45 AM
@adamsleath....You're from Brisbane? My mom is from Brisbane and Dad is from Aukland. Been thinking of moving to Australia past few years!
Back on topic.....I got the Q6600 over the E6850 and am hoping that the temps are good with this new G0 Stepping with the mosefts being so close on this board. we will see soon enough!
revogamer
07-16-2007, 12:34 PM
it is the middle of our winter here :)
summer inside gets to about 28c...then i put the a/c on.
it is 16-18c in the mornings (brrr cold)
it gets to 0c in the morning here, and -10 around my country :p:
michaLcoughliN
07-17-2007, 12:54 AM
4ghz mmmmm.. try for higher!! :D
bithkits
07-17-2007, 04:02 AM
Congrats! I cant wait for these to become available!
hecktic
07-17-2007, 04:20 AM
thats nice but i must ask, would you use 1.5v 24/7 ??
adamsleath
07-17-2007, 04:35 AM
@adamsleath....You're from Brisbane? My mom is from Brisbane and Dad is from Aukland. Been thinking of moving to Australia past few years!
Back on topic.....I got the Q6600 over the E6850 and am hoping that the temps are good with this new G0 Stepping with the mosefts being so close on this board. we will see soon enough!
g'day brother; i got some cousins in otrahonga, NZ(i know that isnt how you spell it...)
Aussie is a bit drought ridden at the moment...:(
i think you'd prefer NZ to Brisvegas :D...not that you arent welcome ;)
XtremeTiramisu
07-17-2007, 04:37 AM
thats nice but i must ask, would you use 1.5v 24/7 ??
If it's 1.5v @ BIOS set and 1.47v windows and 1.46v under load, I think it's still within the absolute safe 24/7 boundary. If it's 1.5v under load, that would be a bit too much for 24/7. However temp matters more as I think none of us will likely to keep the CPU long enough before the detereotion started to take a hit in performance after years..
adamsleath
07-17-2007, 04:44 AM
i havent encountered any glitches yet.
playing my usual bf2142 and medieval2...
did 3d06 np
3.6GHz needs 1.4/1.35
3.8 i set at 1.47/1.42
and dats all folks.
im not pushing it further than 4gig, although im sure it would go higher with riddikilus v's.
billdavis
07-17-2007, 06:40 AM
that is good
lets see how high you can go
clone38
07-17-2007, 08:39 AM
Ok some benching done this moring.
Videodriver 162.18
Cpu @ 4.1GHz not tested stable yet.
8800 Ultra superclocked core 741 memory 1195
Aquamark.
http://img.photobucket.com/albums/v293/clone38/E68504.1GHZ88007411195.jpg
3Dmark 06
http://service.futuremark.com/compare?3dm06=2479042
3Dmark 05
http://service.futuremark.com/compare?3dm05=3254227
hausner
07-20-2007, 08:55 PM
Ok some benching done this moring.
Videodriver 162.18
Cpu @ 4.1GHz not tested stable yet.
8800 Ultra superclocked core 741 memory 1195
Aquamark.
3Dmark 06
http://service.futuremark.com/compare?3dm06=2479042
3Dmark 05
http://service.futuremark.com/compare?3dm05=3254227
What voltage for 4.1Ghz ?
badboy
07-20-2007, 09:32 PM
Nice scores. :)
GripS
07-20-2007, 09:37 PM
thats nice but i must ask, would you use 1.5v 24/7 ??
I have been for a couple of weeks now and from what i understand if the temps are under control that shouldn't be an issue. Not too worried about it as i'll be replacing with a quad pretty soon.
I would like to see the voltage needed as well. The way i see it this isn't so impressive if it needs high volts. I don't consider my chip to be a beast by any means but... I'm 1.27ghz over stock with 1.5v. I think that's more impressive. But i guess everyone here is looking at actual 4+ghz clock speed chips.:)
clayton
07-20-2007, 09:39 PM
Nice stuff. Also, the thread says "4GB".
________
Babimac (http://babimac.com/)
scwam
07-20-2007, 09:44 PM
Ok some benching done this moring.
Videodriver 162.18
Cpu @ 4.1GHz not tested stable yet.
8800 Ultra superclocked core 741 memory 1195
Aquamark.
http://img.photobucket.com/albums/v293/clone38/E68504.1GHZ88007411195.jpg
3Dmark 06
http://service.futuremark.com/compare?3dm06=2479042
3Dmark 05
http://service.futuremark.com/compare?3dm05=3254227
Regarding 3dmark06
I wonder if you might have that GPU core clocked too high or possibly the memory giving you diminishing returns. Look at your sm3.0 score compared to this guy who is supposedly running his card at stock. Yours is lower which leads me to believe you would getting better performance if you lowered your card down some. Also he only scores a total of 400 points less than you.
See this thread. He's running 3.5ghz and GTX supposedly at stock :
http://hardforum.com/showpost.php?p=1031278533&postcount=68
tranceaddict
07-20-2007, 10:30 PM
Those are some awesome scores, probably one of the highest I have seen for a 24/7, single card setup. One question, that proc is 24/7 stable at 4GHz, but what is the highest you can run your 8800 Ultra @ for 24/7, on your WC setup?
MaK2000
07-20-2007, 10:36 PM
Is that card WC as well? If it isn't than I doubt it will run any extended period stable at that core clock. Have you ran a looping 3DM06 for any extended period of time(Couple hrs or so)? If it lasts you got the pick of the litter man. Would like to see if your setup can handle an 8 hr Orthos and an 8 hr 3DM06 bashing. Let us know how stable it is.
badboy
07-20-2007, 11:00 PM
Regarding 3dmark06
I wonder if you might have that GPU core clocked too high or possibly the memory giving you diminishing returns. Look at your sm3.0 score compared to this guy who is supposedly running his card at stock. Yours is lower which leads me to believe you would getting better performance if you lowered your card down some. Also he only scores a total of 400 points less than you.
See this thread. He's running 3.5ghz and GTX supposedly at stock :
http://hardforum.com/showpost.php?p=1031278533&postcount=68
I doubt he can get that kind of score with a stock 8800GTX. Look at my score. I did mine at 3.8ghz and 8800GTX at 660/2100 + shader clock at 1675mhz and managed my score below. Unless he has a valid compare link actually showing his score then I would be believe him. Until then I say his score is impossible. Look at his SM 2.0 and SM 3.0 scores. They are much higher than mine with mine overclocked and his supposedly running at stock.
Luis_GT
07-21-2007, 12:02 AM
I doubt he can get that kind of score with a stock 8800GTX. Look at my score. I did mine at 3.8ghz and 8800GTX at 660/2100 + shader clock at 1675mhz and managed my score below. Unless he has a valid compare link actually showing his score then I would be believe him. Until then I say his score is impossible. Look at his SM 2.0 and SM 3.0 scores. They are much higher than mine with mine overclocked and his supposedly running at stock.
Maybe he's running SLI, I mean, mine did 14880 some with a Quad @ 3.9Ghz and my GTX @ 660/2100 :confused:
Where did you get that from op?
unclewebb
07-21-2007, 06:22 AM
thats nice but i must ask, would you use 1.5v 24/7 ??
Why not? I do.
With a bios setting of 1.525 volts I end up with about 1.48 volts when running Orthos on my P5B Deluxe. That voltage is within the Intel specs listed in their datasheet so no worries.
clone38
07-21-2007, 06:30 AM
The videocard is watercooled as well with a EK 8800 block.
Yes i run it at this speed all day everyday with no problems.
As for ORTHOS i ran it 10hr stable then my daughter go`s on my pc and all hell breaks lose.
All i wanted to do was get it stable @ 4ghz im not really into benching as im more into playing game`s.