View Full Version : Highest AMD HTT speeds
SOLDNER-MOFO64
06-10-2007, 04:28 PM
Hey all, just wondered what your highest HTT speeds have been?
Today I've been messing with this X2-3600 I bought recently, and managed to get upto 375mhz using a multi of x8 (x10 default). Not sure, but I can't recall ever seeing any as high as that before...although I'm sure there must be some.....anyone?
markr
06-10-2007, 06:44 PM
How about 430?
http://www.xtremesystems.org/forums/showthread.php?t=101235&highlight=sapphire+htt
Sparky
06-10-2007, 06:47 PM
dang and I thought I was doing good at 333 on my suicide run :p:
hstuehmeyer2000
06-10-2007, 07:06 PM
how about 500+
http://www.anandtech.com/mb/showdoc.aspx?i=2620&p=11
NickS
06-10-2007, 07:14 PM
I did 360 on my old venice 939 on my K8N Neo4 Plat.
tictac
06-10-2007, 11:08 PM
380 on AT9-32x
papatsonis
06-11-2007, 12:26 AM
max "fsb" with very low multi e.g. 2x is nothing to brag about :S , in -most- cases 350-370 fsb is far from enough for -average- overclocker.. what matters -or matter in future- (in propotion to upcoming phenom..) is max HTT clock... of course... 5x 360 it will be miracleous :P but i suspect something more average of 300+ ..
quake6
06-11-2007, 04:41 AM
I did 410 voltage is on default on my dfi cfx3200 and 365 on asus m2n32sli deluxe
can we compare max fsb between 939 and AM2 ?
SOLDNER-MOFO64
06-11-2007, 05:20 AM
can we compare max fsb between 939 and AM2 ?
Sure, I'm curious as to the highest HTT speeds from all AMD64 cpu's :)
Here's an update........390x7/400mhz divider......my memory sux :(
quake6
06-11-2007, 05:21 AM
Probably not,but I put it just if anybody want to compare with 939.And the title is AMD HTT speeds,so 939 also is in that category
I got to 404, and stopped. Seemed enough :D
quake6
06-12-2007, 01:52 PM
What mbo can do highest fsb with rd580 chipset?(am2)
nullface
06-12-2007, 02:19 PM
My micro ATX with NF430 seems to hit a wall around 300+, but the NF430 only gets 1.2v and gets pretty hot, when I get my MCW30 in place ill give it some more v, and see what happens.
Everybody else with NF-M2 and AN-M2 seems to hit a wall at 300+ too.
SeLecT
06-12-2007, 03:24 PM
I've tested 400Mhz on a Foxconn C51XEM2AA. It was SuperPi and Prime-stable.
BenchZowner
06-12-2007, 03:28 PM
Title should be Max FSB not max HTT.
HTT freq = FSB * HTT Multiplier
SnipingWaste
06-12-2007, 08:16 PM
http://pic15.picturetrail.com/VOL601/2766865/13295977/259325199.jpg
This is with a Gigabyte GA-MA69G-S3H (rev. 1.0) AMD 690G
squidmaster
06-12-2007, 08:41 PM
I thought we were talking HTT and not FSB.
Oh well.
My board maxes at 306FSB but I got my HTT to 1300ish
quake6
06-12-2007, 10:33 PM
And you have what mbo?
LIKMARK
06-12-2007, 11:50 PM
350FSB Asus A8N SLI SE : http://valid.x86-secret.com/show_oc.php?id=169693
squidmaster
06-13-2007, 07:50 AM
And you have what mbo?
Asus A8V-XE
lemme SS for ya one sec.
squidmaster
06-13-2007, 08:22 AM
here ya go
http://i24.photobucket.com/albums/c31/kakor/th_1300htt_0001.jpg (http://s24.photobucket.com/albums/c31/kakor/?action=view¤t=1300htt_0001.flv)
TigeriS
06-13-2007, 09:55 AM
I can't get higher than 3 x 356Mhz :(
Right now I run @ 4 x 255. That's because My Windsor 4200+ can't go much higher than 2.8GHz. And I like to have at least 400Mhz memory.
Spookie
06-13-2007, 10:02 AM
HT Link 1500+
http://spookie.lancut.org/oc/cpu/am2/s3000/pi1mb-28750.JPG
1528
http://valid.x86-secret.com/show_oc?id=183070
uwackme
06-13-2007, 10:09 AM
Spookie, what motherboard and what voltages onthe chipsets are you running?
Spookie
06-13-2007, 10:15 AM
stock V chipset;
mobo: DFI inf nf4 sli am2
my old 24/7 setting
http://spookie.lancut.org/oc/cpu/am2/s2800/2920-4gb.JPG
HTT 365
HT Link 1463
4x1gb :)
squidmaster
06-13-2007, 10:16 AM
jesus spookie I bow down to you.
I think I read about those damn semperons on XS somewhere else. They are crazy :]
yotomeczek
06-13-2007, 10:26 AM
Long time ago ...
http://img153.imageshack.us/img153/9189/fsb480superpi32mln7.jpg
squidmaster
06-13-2007, 10:44 AM
wow man 480 FSB (I am just guessing that's what the 480 is)
what board was that?
Trunks
06-13-2007, 10:49 AM
wow man 480 FSB (I am just guessing that's what the 480 is)
what board was that?
Amd use htt ;)
I guess that mobo is a DFI lanparty nf4 XXX :D
yotomeczek
06-13-2007, 10:52 AM
wow man 480 FSB (I am just guessing that's what the 480 is)
what board was that?
DFI NF4 Ultra D :)
Venice and others was poor fsb clocker (about 380 on this bosrd)
squidmaster
06-13-2007, 10:59 AM
Amd use htt ;)
I guess that mobo is a DFI lanparty nf4 XXX :D
in my CPUz I have an HT link (which is about 1200 right now) and a Bus Speed which is 260 right now. I guess its for the AM2 then cause I use 939.
DFI NF4 Ultra D :)
Venice and others was poor fsb clocker (about 380 on this bosrd)
Oh man no wonder.
I can't wait to get my Expert DR :]
xploit
06-17-2007, 09:42 PM
soldermobo64 SEND ME THAT WALLPAPER!! BUMP for a hot wallpaper!