uncola
05-26-2007, 05:14 AM
So my case has a headphone and mic port on the front, I already connected up the 2 front usb ports but I can't figure out the audio.. the case has seven cables labeled:
Mic In , Mic Bias , Ground , Spk Out R , Spk Out L , Return R , Return L
but my motherboard manual shows 10 pins labeled:
1 Port 1L Analog Port 1 Left channel
2 GND Ground
3 Port 1R Analog Port 1 Right Channel
4 Presence#
5 Port 2R Analog Port 2 Right Channel
6 Sense1_Return
7 Sense_send
8 Key
9 Port 2L Analog Port 2 Left Channel
10 Sense2_Return
what goes where? I get the feeling I should be able to figure this out just by looking at it, but I don't want to short anything out. Is that even possible? to short out the JAUD1 pins on my msi p965 neo f?
Mic In , Mic Bias , Ground , Spk Out R , Spk Out L , Return R , Return L
but my motherboard manual shows 10 pins labeled:
1 Port 1L Analog Port 1 Left channel
2 GND Ground
3 Port 1R Analog Port 1 Right Channel
4 Presence#
5 Port 2R Analog Port 2 Right Channel
6 Sense1_Return
7 Sense_send
8 Key
9 Port 2L Analog Port 2 Left Channel
10 Sense2_Return
what goes where? I get the feeling I should be able to figure this out just by looking at it, but I don't want to short anything out. Is that even possible? to short out the JAUD1 pins on my msi p965 neo f?