PDA

View Full Version : Problems whit new compressor for LS


FireLight
05-24-2007, 01:21 AM
I want bay Danfoss NF11FX to my vapo,but from danfoss bulgaria says that model is replace whit NF10FX...I think to use R402a for agent.But everyone using nf11fx,what is the difference between two models?




sorry for my english:(
LittleDevil
05-24-2007, 02:05 AM
NF11FX is little more stronger than NF10FX, but NF10FX will work yust fine ;)

regards
FireLight
05-24-2007, 02:43 AM
NF11FX is little more stronger than NF10FX, but NF10FX will work yust fine ;)

regards



And no problems whit 402a?I see -69 idle whit this agent,i prepare for QX:)



thanks for fast answer:up:
LittleDevil
05-24-2007, 02:52 AM
Yes can use R402a but if you have -69 idle (k-type sensor) i think it cannot hold QX ;)

regards
FireLight
05-24-2007, 03:14 AM
Yes can use R402a but if you have -69 idle (k-type sensor) i think it cannot hold QX ;)

regards


What u recommend?
n00b 0f l337
05-24-2007, 05:00 AM
We cannot recommend a temperature, you have to have the unit tuned for your load.
piotres
05-24-2007, 06:02 AM
Hi

You live in Europe, i guess You have 220-240v in home so buy NL11F, I think NF series is for 115V so US ...

Danfoss NL11F will be for sure good to hold QX load with good temperatures and low noise level :-).

Regards
Peter
FireLight
05-24-2007, 07:51 AM
We cannot recommend a temperature, you have to have the unit tuned for your load.


I ask to recommend compressor(my bad english in action).Thanks anyway :toast:


Hi

You live in Europe, i guess You have 220-240v in home so buy NL11F, I think NF series is for 115V so US ...

Danfoss NL11F will be for sure good to hold QX load with good temperatures and low noise level :-).

Regards
Peter


Yes, i have 220-240v in home(some times even more:D ),i call danfoss in monday for more info.


thanks you to Peter
FireLight
07-24-2007, 11:20 AM
Hi again.I find danfoss NL11F and i want to prepare to QX6600 and more then 200-230W load...Any links or advice to mod my vapo?
Pete
07-24-2007, 11:23 AM
New evap, new condenser, SLHX and Accumolater

Blend of gasses maybe

Ie custom unit more than anything!

LD, Poitress, Dimas are the ones too see about it with you being in the EU
FireLight
07-24-2007, 11:45 AM
New evap, new condenser, SLHX and Accumolater

Blend of gasses maybe

Ie custom unit more than anything!

LD, Poitress, Dimas are the ones too see about it with you being in the EU

WOW!I think new comperssor and R402 will be fine:(
Pete
07-24-2007, 12:11 PM
Nope need the SLHX and accomloater along with a proper compresser.

Why not R404a?
n00b 0f l337
07-24-2007, 01:14 PM
Don't need an SLHX pete, not at all.
What you do need is a way to stop the floodback problems, so an accumulator can be a good idea if you have the size for one, or it just needs to be properly tuned via superheat or the unit can simply be run on a proc that runs F@H or the like.
R507a or R404a though for our small units is better then r402a in my opinion for quads, the lower discharge is really needed.
FireLight
07-25-2007, 12:20 AM
Don't need an SLHX pete, not at all.
What you do need is a way to stop the floodback problems, so an accumulator can be a good idea if you have the size for one, or it just needs to be properly tuned via superheat or the unit can simply be run on a proc that runs F@H or the like.
R507a or R404a though for our small units is better then r402a in my opinion for quads, the lower discharge is really needed.


I order NF11L,is R404a/R507a in stock vapo?