SaNxU SS Worklog - Begining -

[SaNxU]

Hi, i'm a Spanish Boy that begins some time ago to build some SS units. I'll show you some of my creations;)

First of all, sorry for my english... i'm 18 years old and in my school the english sucks.

Well my first SS was for Cocomocho:

Aspera ne2134GK 3/8CV
Some small condenser. Pecomark AT-12.
Spire 220v fan 165cfm.
Vapochill evap&enclouser (like customer wanted)
G-frsoter Value
Little DEvil silver case
r507

http://img300.imageshack.us/img300/5434/mibi006kb5.jpg (http://imageshack.us)
http://img177.imageshack.us/img177/189/mibi008lu4.jpg (http://imageshack.us)
http://img90.imageshack.us/img90/7932/mibi011jq3.jpg (http://imageshack.us)
http://img294.imageshack.us/img294/2556/mibi005qo4.jpg (http://imageshack.us)
http://img171.imageshack.us/img171/2536/mibi010ye1.jpg (http://imageshack.us)
http://img221.imageshack.us/img221/1166/mibi009xe9.jpg (http://imageshack.us)

And some final pics. The load was 125W. The boy has only a AMD 64 4000+.

http://img444.imageshack.us/img444/143/fotos2003gl3.jpg (http://imageshack.us)
http://img143.imageshack.us/img143/4618/fotos12004lp3.jpg (http://imageshack.us)
http://img150.imageshack.us/img150/8994/fotos12005cg6.jpg (http://imageshack.us)
http://img150.imageshack.us/img150/390/fotos12006md3.jpg (http://imageshack.us)
http://img150.imageshack.us/img150/5945/imagen001xy6.jpg (http://imageshack.us)

[SaNxU]

The second SS system was an integrated in a xtremely big case modded by the customer.

The system had:

Danfoss fr8,5Cl
Dimas Evap V5 & enclouser
r507
Papst 220v fan 170cfm
Gas high presure liquid viewer.
1,2m of flex line.

Here some pics of the system in the case, and nice hard that the customer have to be cooled;)

http://img148.imageshack.us/img148/6653/fotos2003jf2.jpg (http://imageshack.us)

http://img181.imageshack.us/img181/8360/fotos2001oo5.jpg (http://imageshack.us)

http://img148.imageshack.us/img148/1076/fotos2002xr0.jpg (http://imageshack.us)

http://img347.imageshack.us/img347/4128/fotos2004pq9.jpg (http://imageshack.us)

http://img347.imageshack.us/img347/9845/fotos2006vn7.jpg (http://imageshack.us)

http://img248.imageshack.us/img248/7492/fotos2011yf0.jpg (http://imageshack.us)

http://img183.imageshack.us/img183/125/fotos2012ih9.jpg (http://imageshack.us)

And here the hardware and insulated striker extreme.

http://img238.imageshack.us/img238/1237/img2201us9.jpg (http://imageshack.us)

http://img238.imageshack.us/img238/1750/img2204hs3.jpg (http://imageshack.us)

http://img403.imageshack.us/img403/7773/img2205rt8.jpg (http://imageshack.us)

http://img402.imageshack.us/img402/4807/img2206fi6.jpg (http://imageshack.us)

http://img267.imageshack.us/img267/8805/img2208fb9.jpg (http://imageshack.us)

No pics of the final mounting and no pics of the system under charge.

Regards

[Okda]

glad to see a 18 yr old producing neat units

can u pleas report temps @ 125watt ?

[SaNxU]

Now the third system;) this system will be a little bit more powerfull that the others;) For AMNESIAX.

danfoss sc18cl 1/2cv (18,3cm3)
Unseens big condenser 21.
Dimas evap & enclouser V5.
Papast 220v fan 170cfm.
Little devil black case.
Unseens freeze pack controller.

First build pics:
http://img183.imageshack.us/img183/7435/fotos2007jk6.jpg (http://imageshack.us)

http://img405.imageshack.us/img405/8941/fotos2008aw1.jpg (http://imageshack.us)

http://img455.imageshack.us/img455/5500/fotos2009nj9.jpg (http://imageshack.us)

http://img255.imageshack.us/img255/1189/fotos2010lt9.jpg (http://imageshack.us)

http://img255.imageshack.us/img255/6449/fotos2013ob7.jpg (http://imageshack.us)


Pics of the first run, completly uninsulated:

http://img126.imageshack.us/img126/2996/fotos30015du.jpg (http://imageshack.us)

http://img263.imageshack.us/img263/8083/fotos30037fp.jpg (http://imageshack.us)

http://img296.imageshack.us/img296/3620/fotos30044pp.jpg (http://imageshack.us)


First testing in Xevipius System: (provisional insulation)

e6700 1,78v 4700mhz.
Abit AW9-MAX
4x512 Corsair XMS2 677 cl3 "fat body"
enermax infinity 620W.
7900gs


http://img109.imageshack.us/img109/3717/epsn3784sq4.th.jpg (http://img109.imageshack.us/my.php?image=epsn3784sq4.jpg)

http://img109.imageshack.us/img109/9038/epsn3798hb4.th.jpg (http://img109.imageshack.us/my.php?image=epsn3798hb4.jpg)

http://img248.imageshack.us/img248/2985/epsn3799kd3.th.jpg (http://img248.imageshack.us/my.php?image=epsn3799kd3.jpg)

http://img409.imageshack.us/img409/6672/epsn3800lz0.th.jpg (http://img409.imageshack.us/my.php?image=epsn3800lz0.jpg)

http://img120.imageshack.us/img120/4732/epsn3801db8.th.jpg (http://img120.imageshack.us/my.php?image=epsn3801db8.jpg)

http://img109.imageshack.us/img109/153/epsn3802dq9.th.jpg (http://img109.imageshack.us/my.php?image=epsn3802dq9.jpg)

http://img243.imageshack.us/img243/2020/epsn3803ty1.th.jpg (http://img243.imageshack.us/my.php?image=epsn3803ty1.jpg)

http://img120.imageshack.us/img120/9129/epsn3804ya6.th.jpg (http://img120.imageshack.us/my.php?image=epsn3804ya6.jpg)

http://img409.imageshack.us/img409/5269/epsn3805mr8.th.jpg (http://img409.imageshack.us/my.php?image=epsn3805mr8.jpg)

http://img261.imageshack.us/img261/8031/epsn3807xc7.th.jpg (http://img261.imageshack.us/my.php?image=epsn3807xc7.jpg)

http://img120.imageshack.us/img120/6510/epsn3809hp3.th.jpg (http://img120.imageshack.us/my.php?image=epsn3809hp3.jpg)

http://img409.imageshack.us/img409/7510/epsn3810vi5.th.jpg (http://img409.imageshack.us/my.php?image=epsn3810vi5.jpg)

http://img261.imageshack.us/img261/2371/epsn3813ep8.th.jpg (http://img261.imageshack.us/my.php?image=epsn3813ep8.jpg)

http://img261.imageshack.us/img261/4687/epsn3817gy8.th.jpg (http://img261.imageshack.us/my.php?image=epsn3817gy8.jpg)

http://img266.imageshack.us/img266/7439/epsn3818ju8.th.jpg (http://img266.imageshack.us/my.php?image=epsn3818ju8.jpg)

http://img261.imageshack.us/img261/9636/epsn3820zs8.th.jpg (http://img261.imageshack.us/my.php?image=epsn3820zs8.jpg)

http://img527.imageshack.us/img527/5791/epsn3828el0.th.jpg (http://img527.imageshack.us/my.php?image=epsn3828el0.jpg)
http://img186.imageshack.us/img186/9915/epsn3837gw5.th.jpg (http://img186.imageshack.us/my.php?image=epsn3837gw5.jpg)

http://img413.imageshack.us/img413/3076/epsn3854rm3.th.jpg (http://img413.imageshack.us/my.php?image=epsn3854rm3.jpg)

http://img101.imageshack.us/img101/4664/epsn3859kd5.th.jpg (http://img101.imageshack.us/my.php?image=epsn3859kd5.jpg)

http://img185.imageshack.us/img185/7610/epsn3872cg9.th.jpg (http://img185.imageshack.us/my.php?image=epsn3872cg9.jpg)

http://img407.imageshack.us/img407/3779/epsn3873uo4.th.jpg (http://img407.imageshack.us/my.php?image=epsn3873uo4.jpg)

http://img72.imageshack.us/img72/6854/epsn3874rj1.th.jpg (http://img72.imageshack.us/my.php?image=epsn3874rj1.jpg)

http://img404.imageshack.us/img404/4705/epsn3879ci6.th.jpg (http://img404.imageshack.us/my.php?image=epsn3879ci6.jpg)

http://img404.imageshack.us/img404/9792/epsn3878cd6.th.jpg (http://img404.imageshack.us/my.php?image=epsn3878cd6.jpg)


And now some final pics of the system. Xtremecooling.es

http://img159.imageshack.us/img159/7203/img2211ln0.th.jpg (http://img159.imageshack.us/my.php?image=img2211ln0.jpg)

http://img442.imageshack.us/img442/1125/img2212uw5.th.jpg (http://img442.imageshack.us/my.php?image=img2212uw5.jpg)

http://img520.imageshack.us/img520/870/img2213ju2.th.jpg (http://img520.imageshack.us/my.php?image=img2213ju2.jpg)

http://img181.imageshack.us/img181/4228/img2214pm6.th.jpg (http://img181.imageshack.us/my.php?image=img2214pm6.jpg)

http://img529.imageshack.us/img529/9118/img2215wr8.th.jpg (http://img529.imageshack.us/my.php?image=img2215wr8.jpg)

Best regards

[J.E.P.]

18 years old and making those nice units! Nice job, and your English is legible.

[n00b 0f l337]

Nice job, clearly you've had some practice or are just a very neat person. :)
Congrats on a few jobs well done.

[SaNxU]

And Big bestias XEvipius single stage. Xevipius was testing the amnesiax system and in the same day he wants the most powerfull SS that can I create;) Lets go then:

The first attempt:

danfoss sc18cl compressor.
Big condenser 1,1KW.
Dimas V5 evap & enclouser.
SLHX 2meters 1/4 in and 1/2 out.

http://img405.imageshack.us/img405/2518/fotos3005co8.jpg (http://imageshack.us)

http://img74.imageshack.us/img74/4452/fotos3008hs1.jpg (http://imageshack.us)

the system have some bad temps, I have changed the filter and the cappilar and continues having soo high temps, and we decide to don't put the SLHX.

http://img260.imageshack.us/img260/8754/img1531io4.jpg (http://imageshack.us)

http://img260.imageshack.us/img260/8615/img1544fn7.jpg (http://imageshack.us)

http://img260.imageshack.us/img260/1684/img1548wo5.jpg (http://imageshack.us)



Then i will shout the testing pics of the SS and some waterchiller for the 975X from the abit;)

First insulation:

http://img409.imageshack.us/img409/8044/img1514rb8.jpg (http://imageshack.us)

http://img409.imageshack.us/img409/9808/img1516op3.jpg (http://imageshack.us)

The complete mounting:

http://img444.imageshack.us/img444/9563/img1551px1.jpg (http://imageshack.us)

http://img444.imageshack.us/img444/2527/img1554mz0.jpg (http://imageshack.us)

http://img254.imageshack.us/img254/3418/img1565nz5.jpg (http://imageshack.us)

http://img254.imageshack.us/img254/5295/img1567ig7.jpg (http://imageshack.us)

http://img252.imageshack.us/img252/1227/img1568xn5.jpg (http://imageshack.us)

http://img252.imageshack.us/img252/9072/img1569kv2.jpg (http://imageshack.us)

http://img102.imageshack.us/img102/536/img1571wf4.jpg (http://imageshack.us)

And the uninsulated waterchiller pump:

http://img102.imageshack.us/img102/9650/img1595ih7.jpg (http://imageshack.us)


best regards

[SaNxU]

glad to see a 18 yr old producing neat units

can u pleas report temps @ 125watt ?

In the first system I have put the resistor but in the second the customer wants to optimiz the gas charge for his e6600 and sincerly i have forgot to take some pics of the bios temp, couse the second system havnt got no controller.


18 years old and making those nice units! Nice job, and your English is legible.

Some good and pretty engish teatcher;)
And some good friendly frigorist;)


Nice job, clearly you've had some practice or are just a very neat person. :)
Congrats on a few jobs well done.

Yes I've had some practise cos I have created 2 or 3 units for my finish school project;) And a frigorit friend have helped me to learn;)

[n00b 0f l337]

You definitly have access to nice parts as well. Damn man.

[4Qman]

Very impressive dude. hope to see some load temps on the SC18 unit. :D

[Raller]

Very Very nice SaNxU!

It´s looking really really good!

[HoriWanderFuLL]

To be 18 years old and putting out work like this is Awsum stuff :up:

Do you know somone in the Electrical Refridge industry how got you involved into all of this ?

How does a 18 yr old gather all of this Knowledge and get it all to work so fine ?
Great Stuff mate im sure your going to make a lot of new friends :up:

Cheers Hori

[Clemmaster]

Why did you use a SLHX here? More over why did you put it just before the succion connector? You won't have any margin with a SLHX at this place and It won't help anything.

The two other systems look weel, nice job ;)

[Dimas]

nice work there Sanxu...you finally had access to XS:D:D
i'm waiting for new cases units...i sent you last time;)

[potkit]

Lol why do you make age a big deal im 18 too and i have built a couple of units not as pretty as his coz i have no money .
btw if im not wrong LukeXE is 18 too and piotres 19 so...

[gosmeyer]

Nice job :yepp:

[SaNxU]

You definitly have access to nice parts as well. Damn man.

Many thanks to dimas and little devil. they give me some parts like cases, evaps and condensers;) Now i'm developing a new ultra controller with some amazin price;) 5 proves, USB, and more;) i'll make some post to show us;)


Very impressive dude. hope to see some load temps on the SC18 unit. :D

I havent no gas, ad i'm waiting for 12kg of r402a to test this system;) i think that will be a very excelent cooler, and will push xevipius e6700 with some p3k or with some good p5b at 5000 or more;) we'll see;)


To be 18 years old and putting out work like this is Awsum stuff :up:

Do you know somone in the Electrical Refridge industry how got you involved into all of this ?

How does a 18 yr old gather all of this Knowledge and get it all to work so fine ?
Great Stuff mate im sure your going to make a lot of new friends :up:

Cheers Hori

Yes one frigorist helps me some times ago with the school final project, and after that i begin to do this systems;)


Why did you use a SLHX here? More over why did you put it just before the succion connector? You won't have any margin with a SLHX at this place and It won't help anything.

The two other systems look weel, nice job ;)

I put the SLHX near the sucction conector because there was no liquid retunr to the compresor, but i dont know why the system only goes under -45 and without nothing and without some gas, the system was -55... i think that i did something wrong:S what do you think that i'll have to do in next systems?


nice work there Sanxu...you finally had access to XS:D:D
i'm waiting for new cases units...i sent you last time;)

jejeje Dimas thanks for all;) i'm working on these units, i think that next weekend i'll have the silver one done;) and the window one will be later with some light and others;) we'll see too;) i have to make the controller post;) you'll be amazed;)


Lol why do you make age a big deal im 18 too and i have built a couple of units not as pretty as his coz i have no money .
btw if im not wrong LukeXE is 18 too and piotres 19 so...

jejejej don't worry for the money, i have done some investments first and then we'll see;)
Yeah, there are a lot of builders that have same years, too.


Nice job :yepp:

Thanks;) i have done as best as i know;)




Thanks to all;) XS in my opinion its the best site;)

Best regards to all;)

[LittleDevil]

Really nice units there ;) Great work :up:

regards

[Ssilencer]

Well, finally Spain has his own builder
Way to go man!

[Clemmaster]

I put the SLHX near the sucction conector because there was no liquid retunr to the compresor, but i dont know why the system only goes under -45 and without nothing and without some gas, the system was -55... i think that i did something wrong:S what do you think that i'll have to do in next systems?


If you wanna put a slhx (what I will never advise you to put seen the gas you use) put it where there is liquid return, so just after the flex line. You're lucky using it with a powerfull compressor, I've seen lots of people using it with nl11f ... :rolleyes: . SLHX is useless until the compressor you're running with isn't able to carry a decent load (~250-300w). When you use SLHX, you want to run out of specs, which means you're using an amount of power to reach some very low temperature. So if you're compressor isn't able to give you flood back at the temperature you're aiming at, don't put the slhx, you will use a part of the power for nothing because you'll have to increase the floodback for the SLHX beeing frost, and if you do that you increase the working pressures (especially the succion pressure) so you use an amount of you're energy to help the gas being condensed, but in the same time you increase the evaporating temperature.

SLHX can be use with powerfull Rotary and R410a, because you don't need all the power the rotary can give you, and R410a is harder to condense than others gases, you help it to condense and so the compression ratio (which is very important) decrease. (it decrease on others systems too, but the BP increase :/)

[Exahertz]

Awsome work! i was around 20 when i first got intrested in doing this. im 23 now and just starting to get the stuff together. but i like the way those things look.

BTW how old is everyone here? are most of the guys here over 30?

[Brettbeck]

WOW, just read this thread and I think i've seen the ;) smiley about 200 times :eek: lol!

Great work SaNxU! But on that big single-stage unit... are you feeding the captube through its own insulation line? If so you should wrap it round the suctionline!



Awsome work! i was around 20 when i first got intrested in doing this. im 23 now and just starting to get the stuff together. but i like the way those things look.

BTW how old is everyone here? are most of the guys here over 30?


I started building units at 15 :). Cascade at 16 (now).

[SaNxU]

Really nice units there ;) Great work :up:

regards

thanks Little Devil, your cases here have done a good stetic job;)


Well, finally Spain has his own builder
Way to go man!

Finally yes;) Thanks to Silencer for g-froster ans his good post-sell attention.


If you wanna put a slhx (what I will never advise you to put seen the gas you use) put it where there is liquid return, so just after the flex line. You're lucky using it with a powerfull compressor, I've seen lots of people using it with nl11f ... :rolleyes: . SLHX is useless until the compressor you're running with isn't able to carry a decent load (~250-300w). When you use SLHX, you want to run out of specs, which means you're using an amount of power to reach some very low temperature. So if you're compressor isn't able to give you flood back at the temperature you're aiming at, don't put the slhx, you will use a part of the power for nothing because you'll have to increase the floodback for the SLHX beeing frost, and if you do that you increase the working pressures (especially the succion pressure) so you use an amount of you're energy to help the gas being condensed, but in the same time you increase the evaporating temperature.

SLHX can be use with powerfull Rotary and R410a, because you don't need all the power the rotary can give you, and R410a is harder to condense than others gases, you help it to condense and so the compression ratio (which is very important) decrease. (it decrease on others systems too, but the BP increase :/)

Thanks for the lesson! I'll put SLHX in one rotatory system only;)




WOW, just read this thread and I think i've seen the ;) smiley about 200 times :eek: lol!

Great work SaNxU! But on that big single-stage unit... are you feeding the captube through its own insulation line? If so you should wrap it round the suctionline!


I started building units at 15 :). Cascade at 16 (now).

Jejeje, sorry fo the smiley but its like a tik that i have. Yeah the captube its arround the suction line, but when i have firslty put the SLHX I have put the cap tube arround the SLHX.

jejeje your age are extremely impresive;) cascade at 16 its very impresive.



Thanks for all

[Pete]

This is amazing stuff dude. Looking really good

[teyber]

holy :banana::banana::banana::banana:! so clean, i love it. also, does your dad have a shop or something? cuz how do you get the tools and such?

[SaNxU]

This is amazing stuff dude. Looking really good

Thanks ;)


holy :banana::banana::banana::banana:! so clean, i love it. also, does your dad have a shop or something? cuz how do you get the tools and such?

sorry, my father is a doctor.:up: I bought the tools here in spain.

Best regards

[LittleDevil]

Can i ask you what is power consumption of SC18cl unit?

regards

[SaNxU]

Can i ask you what is power consumption of SC18cl unit?

regards

Didn't test the power consumption of SC18Cl. Sorry.



Now another unit with:

Danfoss SC10CL 3/8 cv 10,7cm3
15cm condenser.
Dimas V5 evaporator & enclouser
R404
Xtreme cooling Controller 16x2 lcd (mine controller;))
Dimas 59cm long grilled case.

Now some of the pics: (osrry for them, are maked with my phone...)

http://img146.imageshack.us/img146/8276/dscn0772qr2.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

http://img522.imageshack.us/img522/7568/dscn0773iq6.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

And now some pics of the Xtreme Cooling controller:

The controller, its dificult to see...

http://img146.imageshack.us/img146/1204/dscn0777ol6.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

compressor prove:

http://img384.imageshack.us/img384/1219/dscn0778pn3.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

Discharge prove:

http://img146.imageshack.us/img146/3691/dscn0781bb9.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

Suction prove:

http://img62.imageshack.us/img62/9833/dscn0782oc6.jpg (http://imageshack.us)


Some pics of the units in action in some days;)

Best regards

[Athens[2004]]

Nice , can u post some pics with closed case.

Thnx .

[Marvin]

very nice builds...
congrats.

[Nosfer@tu]

Nice job :)

Now FIND A LOADTESTER :D

[Brettbeck]

Very nice unit!

How come you've made a link to information about your camera under some pictures :confused: ?

And btw, "prove" is actually "probe" :).

[SaNxU]

;2295372']Nice , can u post some pics with closed case.

Thnx .

No problem, in next days i'll post some completly case pics. the case was from Dimas, so, i think that's ok;)


very nice builds...
congrats.

thanks!


Nice job :)

Now FIND A LOADTESTER :D

jeje, sure, i have to buy some resistors cos my headload was burned in action;) jeje


Very nice unit!

How come you've made a link to information about your camera under some pictures :confused: ?

And btw, "prove" is actually "probe" :).

thanks!

I dn't know why there are some camera information next to each picture, i think that it's the new software of imageshack.

jeje thanks for the spelling information!




Best regards to all!

[SaNxU]

Now new system;

the silver sistem closed case pics will come in few days.

LUZ asked me for a V2000 device with all black painted pipes, and here we go:

The Truth Black Pearl:

Specs:

Danfoss fr8,5cl
Dimas evap V5.
Simply condenser
r404
0,8mm 2,7m cap.

Lets see now the pictures, best part of course;)

Some detailed pics of the pipes and others. Lets see that in the last pipe of the condenser something have scratched and the paint have fallen. will be repainted.

http://img399.imageshack.us/img399/1462/dscn0807qc5.jpg (http://imageshack.us)

http://img262.imageshack.us/img262/8200/dscn0808kv3.jpg (http://imageshack.us)

http://img262.imageshack.us/img262/1183/dscn0809ec3.jpg (http://imageshack.us)

http://img262.imageshack.us/img262/4194/dscn0815qi0.jpg (http://imageshack.us)

http://img441.imageshack.us/img441/2495/dscn0816cr4.jpg (http://imageshack.us)

http://img523.imageshack.us/img523/8651/dscn0817qx9.jpg (http://imageshack.us)


And now some pics without light:

http://img514.imageshack.us/img514/9132/dscn0823nm6.jpg (http://imageshack.us)

http://img523.imageshack.us/img523/286/dscn0821gm2.jpg (http://imageshack.us)

Now its vacuming, and tomorrow first frosty pics, insulate and others.

Best regards

[teyber]

Didn't test the power consumption of SC18Cl. Sorry.



Now another unit with:

Danfoss SC10CL 3/8 cv 10,7cm3
15cm condenser.
Dimas V5 evaporator & enclouser
R404
Xtreme cooling Controller 16x2 lcd (mine controller;))
Dimas 59cm long grilled case.

Now some of the pics: (osrry for them, are maked with my phone...)

http://img146.imageshack.us/img146/8276/dscn0772qr2.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

http://img522.imageshack.us/img522/7568/dscn0773iq6.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

And now some pics of the Xtreme Cooling controller:

The controller, its dificult to see...

http://img146.imageshack.us/img146/1204/dscn0777ol6.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

compressor prove:

http://img384.imageshack.us/img384/1219/dscn0778pn3.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

Discharge prove:

http://img146.imageshack.us/img146/3691/dscn0781bb9.jpg (http://imageshack.us)
Shot with S1 (http://profile.imageshack.us/camerabuy.php?model=S1&make=NIKON)

Suction prove:

http://img62.imageshack.us/img62/9833/dscn0782oc6.jpg (http://imageshack.us)


Some pics of the units in action in some days;)

Best regards
What is that taped to the compressor? Towards the bottum.

Sorry im a Noob, is that to ground the compressor? how much electrical work has to be done to the compressor?

[SaNxU]

It's de compressor probe that if compressor temp's go over 65º que system get down;)

It's one of the 5 probes that have my controller;) Xtreme Cooling Controller;)

Best regards.

[SaNxU]

New pics of the system, ready for shipping:+

Typical first frosty pics:

http://img91.imageshack.us/img91/6039/p1000150cg1.jpg (http://imageshack.us)

Blue sleeved:

http://img91.imageshack.us/img91/9794/p1000151io5.jpg (http://imageshack.us)

http://img91.imageshack.us/img91/9337/p1000153kr3.jpg (http://imageshack.us)

http://img91.imageshack.us/img91/6775/p1000154cp2.jpg (http://imageshack.us)

http://img69.imageshack.us/img69/53/p1000155hw9.jpg (http://imageshack.us)

And here some gas tweaking with my new heat load tester with lcd, prove, shutdown temperatura, etc:D

http://img405.imageshack.us/img405/3076/p1000180qj5.jpg (http://imageshack.us)

And the goal, 178W at -42,3. good temps for this small system:

http://img405.imageshack.us/img405/6717/p1000181fk3.jpg (http://imageshack.us)

Best regards

[Pete]

Flipping heck dude. You rock! I don'tmean to be by asking but i do remeber you saying how old you where!

Have you a price list for your builds and parts you can send me via PM only please?

[tim-]

very nice loadtester.
what range are you able to set it in?

[SaNxU]

Flipping heck dude. You rock! I don'tmean to be by asking but i do remeber you saying how old you where!

Have you a price list for your builds and parts you can send me via PM only please?

thanks Pete;) tomorrow i'll send you a complete and detailed with all prices pm;)


very nice loadtester.
what range are you able to set it in?

its betwen 38W and 405W:D enought;) In some days i'll make a thread of it;)

Best Regards

[tim-]

that's pretty massive.

but what is the resistor rated for?

my resistors is rated with 100watt but I'm feeding them with 125watt and it seems okay with the phase.. how about yours? what watt is the loadtester rated for?

regards
tim

[SaNxU]

its 430W rated;) i think its ok:D jejejej

Best regards