Intel Noob OC question

[chriskurn]

Ok, I am a long time AMD overclocker...NO HTT here :)

I have a P5K and a e6600 i have tried everything in the bios, and I can't change the FSB. I hilite it and nothing, it won't let me change it from 266. What am I missing? These are my current settings:

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Frequency: 266
PCI-E Frequency: 100
DRAM Frequency: AUTO (at 266FSB defaults to 2:3 for AUTO)
DRAM Timing Control: Manual
CAS# Latency: 4
RAS# to CAS# Delay: 4
RAS# Precharge: 4
RAS# Activate to Precharge: 12
TWR: AUTO
TRFC: AUTO
TWTR: AUTO
TRRD: AUTO
TRTP: AUTO
DRAM Static Read Control: Disabled

Transaction Booster: AUTO
Clock Over-Charging Mode: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: AUTO
CPU Voltage Reference: AUTO
CPU Voltage Damper: AUTO
CPU PLL Voltage: AUTO
DRAM Voltage: 2.10
FSB Termination Voltage: AUTO
North Bridge Voltage: AUTO
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO

Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Enabled

USB Configuration
USB Functions: Enabled
Legacy USB Support: Disabled (need to enable it to detect USB flash drives)

[chriskurn]

NM I figured it out. I was pressing enter on the FSB value expecting a popup menu. I just needed to press + or -

Now I feel like a noob++