Joshwaan
05-15-2007, 04:03 PM
Hi Guys
I bought a new Anten Nine Hundred case yesterday installed the following system.
Intel Core E6300
Gigabyte 965 S3
2x 1GB Patriot memory memory can do 5,5,5,15 @ 1000MHZ
Enermax liberty 500Watt PSU
ATI X1900XT
South Blaster Auditgy
Now I was overclocking before np, it went up to 3.10GHZ which was my stable speed in the other case.
I thought since I've dropped the CPU 10c in the case I'll be able to push the chip futher.
So i raised the Vcore to 1.52 to see if it would boot at 7x 460 but no go.
I increase the MCH to .2 and fsb .2 and stilll no different.
I set everything back to default after that and tried overclocking to 3GHZ but when I changed the multiplier 7x 350 it would display as 7x267 1.87GHZ.
So next thing I undated the bios to F9 from gigabyte site which is surpose to help with the 460FSB wall that I'm locked at.
Tried overclocking again and still same thing.
I can't work it out what's happening, the chips working fine in Vista atm as I'm typing this.
Also when I go out of the bios save exit the computer shutdown and powers back on straight away.
Hoping someone can help me.
Cheers
Josh
I bought a new Anten Nine Hundred case yesterday installed the following system.
Intel Core E6300
Gigabyte 965 S3
2x 1GB Patriot memory memory can do 5,5,5,15 @ 1000MHZ
Enermax liberty 500Watt PSU
ATI X1900XT
South Blaster Auditgy
Now I was overclocking before np, it went up to 3.10GHZ which was my stable speed in the other case.
I thought since I've dropped the CPU 10c in the case I'll be able to push the chip futher.
So i raised the Vcore to 1.52 to see if it would boot at 7x 460 but no go.
I increase the MCH to .2 and fsb .2 and stilll no different.
I set everything back to default after that and tried overclocking to 3GHZ but when I changed the multiplier 7x 350 it would display as 7x267 1.87GHZ.
So next thing I undated the bios to F9 from gigabyte site which is surpose to help with the 460FSB wall that I'm locked at.
Tried overclocking again and still same thing.
I can't work it out what's happening, the chips working fine in Vista atm as I'm typing this.
Also when I go out of the bios save exit the computer shutdown and powers back on straight away.
Hoping someone can help me.
Cheers
Josh