PDA

View Full Version : G.Skill 6400 GBHZ cant lowering timings..



strange|ife
04-29-2007, 03:23 AM
does anyone have this memory and been able to get the timings down past 4-4-4-12??

I have 4gb of these in a p5n32-eplus, c2d 6600 L630A
i st vcore to 1.4, NB 1.30, SB auto, VTT 1.45 and memory @ 2.2v 4-4-4-12 1T unlinked @533mhz in bios.

FSB is at 395x9 at the moment, a nice overclock considering i just got this board a few days ago.

the mem is rated up to 2.1, but a blurp on gskills site said it was safe to run it 2.2 with little heat, they actually run very cool. thanks to active cooling.

the problem is no matter what settings i play with, i cant keep it stable at 3-4-3-12 even with 2T. Even tried just 2 sticks of ram..same Deal.

maybe this memory cant do anything lower? Ill try setting the FSB to 350 and not stress the ram and see if i can pull off tighter timings

on another note, this board rocks. i was able to achieve an fsb of 448x7 fairly easily with bascially stock voltage, and a bump on VTT and NB.

but the NB got very hot with crappy heatpipe, set a probe under the NB..was at 65C. just put an order in for a pair of those thermaltake chipset coolers, heard good things about them