Need Prime95 Help.......

[Captn]

I ran Prime95 ver. 24.14 on my E6400 & after 2hours 8min's i get this error

Test 1, 7800 Lucas-Lehmer iterations of M9961473 using 512k FFT Length
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 2 hours 8 minutes - 1 errors, 0 warnings.
Execution halted.


My system Specs are:

E6400 @ 2.6 with Arctic Freezer 7 Pro
EVGA 8800GTX
EVGA 680i Motherboard
Corsair XMS2 2gig
SeaSonic M-12 700W PSU
Antec 900 Case
WD 320 x2

I play games everything runs great with CoreTemp & TAT my temps never get above 37 while running Prime95 Torture Test, my pc never crashed or anything it runs stable. I don't understand the error, maybe someone could shed some light for me? Thank you in advance.

[Chas_The_Man]

Thats the error it throws when something is amiss. If I take off the EPS feature in the bad axe I get that error in about 30 seconds.

[Captn]

All i did was install Prime95 & ran the torture test, didnt mess with any settings. Should i worry about it at all. Im running Orthos atm, see what happens.