Gigaybte N680SLI-DQ6 2x88GTS320mb + dual core & quad core

[PcCI2iminal]

http://img228.imageshack.us/img228/5140/gigaboxhy8.jpg
http://img228.imageshack.us/img228/4188/leadtekx2se8.jpg

FSB
QX6700 max screen -> 365FSB
http://valid.x86-secret.com/show_oc?id=182572

E6600 max screen -> 529FSB
http://valid.x86-secret.com/show_oc?id=182988

340FSB only good for 3d01/3d03/2 x Pi :(
http://img220.imageshack.us/img220/5496/3d0160430sliwp9.jpg

SLI 88GTS
3d01 72698 3dmarks 650/1010mhz(lobby low and high (630/950) )
http://service.futuremark.com/compare?2k1=9176251

3d03 53673 3dmarks 630/950mhz
http://service.futuremark.com/compare?2k3=5288352

3d05 23643 3dmarks 650/1010mhz
http://service.futuremark.com/compare?3dm05=2863760

3d06 15575 3dmarks 650/1010mhz
http://service.futuremark.com/compare?3dm06=1586191

i can not run 3d03->GT3 and 3d01-> lobby low/high with 88GTS SLI @ 650/1010mhz or it will crash :(

i got some issues on the secondary PCIEx16,sometimes this thing just stop to work .... i need to unplug all cards and cmos de Bios to get it done again :(

the max clock for QX6700 is 3867mhz
http://valid.x86-secret.com/show_oc?id=182573
just good for screen :( ,that chip easily reach 4ghz on air....
C2D seems to be ok,i can run cinebench or dual pi with E66 @ 4ghz+

some pics

http://img220.imageshack.us/img220/5696/88gts32mbjc8.th.jpg (http://img220.imageshack.us/my.php?image=88gts32mbjc8.jpg)http://img220.imageshack.us/img220/1830/ballistixxb3.th.jpg (http://img220.imageshack.us/my.php?image=ballistixxb3.jpg)http://img218.imageshack.us/img218/39/crazycool2sw2.th.jpg (http://img218.imageshack.us/my.php?image=crazycool2sw2.jpg)http://img220.imageshack.us/img220/4007/eheimue1.th.jpg (http://img220.imageshack.us/my.php?image=eheimue1.jpg)http://img218.imageshack.us/img218/4015/nbyp4.th.jpg (http://img218.imageshack.us/my.php?image=nbyp4.jpg)
http://img100.imageshack.us/img100/4575/pwmkf8.th.jpg (http://img100.imageshack.us/my.php?image=pwmkf8.jpg)http://img218.imageshack.us/img218/1786/quadlangt6.th.jpg (http://img218.imageshack.us/my.php?image=quadlangt6.jpg)http://img218.imageshack.us/img218/547/sataorangejt7.th.jpg (http://img218.imageshack.us/my.php?image=sataorangejt7.jpg)http://img218.imageshack.us/img218/6207/satapurplegk3.th.jpg (http://img218.imageshack.us/my.php?image=satapurplegk3.jpg)http://img220.imageshack.us/img220/4260/sbmg4.th.jpg (http://img220.imageshack.us/my.php?image=sbmg4.jpg)

MB->Gigabyte N680i DQ-6
BiosF-3 1->NB/PCIE +0.2v, SB/PCIE normal, vFSB 0.35v, HT link +0.25v, SB standyby voltage +0.15v,vcore 1.65v(C2D) and 1.6v(C2Q) ,vddr +0.6v
BiosF-3 2->link boost enable, EIST/Speedstep/VT->off
CPU->E66ES & QX6700
CPU Cooler->water Zalman + Eheim
RAM->Crucial BallistiX6400
HDD->Hitachi 40gb 7200rpm
PSU->Giga-EZ 1000w

[eva2000]

so the gigabyte board ain't using new rev of 680i chipsets for better quad core FSB ?

[PcCI2iminal]

so the gigabyte board ain't using new rev of 680i chipsets for better quad core FSB ?

i was playing with F-2 and F-3 oficial Bios and they look the same for Quad Core ocing, i think a new Bios rev is needed :)

just for comparo the P5N32-E SLI does 370FSB for benching :(