Unknownm691
03-22-2007, 12:25 AM
I got this board 2 weeks ago. I didn't start overclocking untill 1 week ago. I found a stable FSB @ 275 (2.63Ghz).
I did this stupid video called unclocking x2 3600 where I unclocked it to 399Mhz. However, Once I restarted to reset the clock and went into the BIOS. I found A BIOS option unlocked The PCIE Speed just showed up (never was there before). I rased that up to 106Mhz, My System got 285FSB (2.71Ghz) stable.
When I rase the FSB to 290FSB with these options: (300FSB = No screen)
HT running 2x
Memory divider 400FSB
CPU Vcore 1.5
Memory Voltage 2.1
chipset voltage 1.6v
HT voltage to 1.3v
I could boot but when I did orthos it would show one of my Core 0 did A caclulation Error. I though that ment that the CPU would need just alittle more voltage. So once again I restart my computer and went in the BIOS rased it up to 1.55v (1.5v before) restarted into windows. Started up orthos and once again 10seconds into the test, Orthos told me Core 0 did A caclulation Error.
I restarted into the BIOS and rased all the timmings up to the max
6-6-6-19-2T (9ns)
Went into Orthos and it fails again. Can this be A PSU Problem?
Here are my Specs:
CPU: AMD Athlon x2 3600
CPU Cooler: Arctic Freezer 64 pro
Motherboard: Biostar 550 (Am2)
RAM: Consair Value Select PC2-5300 (DDR2 667) (Stable 775Mhz @ 5-5-5-15-1T @ 2.1v)
Video Card: E-VGA 7900GS (6Pin PICE Connecter)
Power Supply: FPS 450W (Dual 12v 18amp x 2)
HardDrive: Samsung 80GB SATAII
CD/DVD: 1) CDWriter 52x32x52x
1) CD Reader 52x
I did this stupid video called unclocking x2 3600 where I unclocked it to 399Mhz. However, Once I restarted to reset the clock and went into the BIOS. I found A BIOS option unlocked The PCIE Speed just showed up (never was there before). I rased that up to 106Mhz, My System got 285FSB (2.71Ghz) stable.
When I rase the FSB to 290FSB with these options: (300FSB = No screen)
HT running 2x
Memory divider 400FSB
CPU Vcore 1.5
Memory Voltage 2.1
chipset voltage 1.6v
HT voltage to 1.3v
I could boot but when I did orthos it would show one of my Core 0 did A caclulation Error. I though that ment that the CPU would need just alittle more voltage. So once again I restart my computer and went in the BIOS rased it up to 1.55v (1.5v before) restarted into windows. Started up orthos and once again 10seconds into the test, Orthos told me Core 0 did A caclulation Error.
I restarted into the BIOS and rased all the timmings up to the max
6-6-6-19-2T (9ns)
Went into Orthos and it fails again. Can this be A PSU Problem?
Here are my Specs:
CPU: AMD Athlon x2 3600
CPU Cooler: Arctic Freezer 64 pro
Motherboard: Biostar 550 (Am2)
RAM: Consair Value Select PC2-5300 (DDR2 667) (Stable 775Mhz @ 5-5-5-15-1T @ 2.1v)
Video Card: E-VGA 7900GS (6Pin PICE Connecter)
Power Supply: FPS 450W (Dual 12v 18amp x 2)
HardDrive: Samsung 80GB SATAII
CD/DVD: 1) CDWriter 52x32x52x
1) CD Reader 52x