Which memory for p5w dh @ 400fsb without using SPD?

[crazyea]

I have the P5W DH rev 1.03g. Which memory will alow me to get to 400fsb without having to use SPD? Will it make any noticable difference?

Right now I have OCZ Plat XTC Rev 2 4-4-4-12 and it wont do it.

How about these? Has anyone tried them?

Team Xtreem PC2-6400 2GB 2X1GB DDR2-800 CL 4-4-4-10 (http://www.ncix.com/products/index.php?sku=20991&vpn=TXDD2048M800HC4DC&manufacture=Team%20Group%20Inc.)

G.SKILL F2-6400PHU2-2GBHZ PC2-6400 2GB 2X1GB DDR2-800 CL4-4-4-12 (http://www.ncix.com/products/index.php?sku=20882&vpn=F2-6400PHU2-2GBHZ&manufacture=G.SKILL)

Mushkin XP2 PC2-8500 2GB 2X1GB DDR2-1066 CL5-5-4-12 (http://www.ncix.com/products/index.php?sku=21669&vpn=996535&manufacture=MUSHKIN)

[Leeghoofd]

Gskill PC6400 work fine with this board. I just don't get your question you want to up the FSB to 400mhz and also run the ram in sync by setting the timings manually ? I had some probs with my OCZ ram at 1066 however , the board didn't like it, reducing speed to 800Mhz ( with better timings reduced this issue )

Have you disabled hyperpath 3 ? upped MCH and Ram voltage ?

[Animal.]

I have team xtreem modules that you have listed and with'em it cannot be done. So my best bet is G.Skill, but i'm just guesing.

[DAK1640]

SuperTalent PC6400

[Zeus]

Running Gskill 6400HZ (2x1GB) on the same board here, 9x400 1:1 just fine at maual timings and 2.05V

[crazyea]

Is it the same stuff I linked too?

[WeldZilla]

Yes crazyea that's the good stuff. the G.Skill that is. I run daily at 425 fsb with my G.Skill running 1:1 with my timings set at 3-3-3-4. It does make a difference.
http://www.xtremesystems.org/forums/showthread.php?t=125168
Go to post 7

WZ

[crazyea]

Wow, that looks great. I'll have to try it! Thanks.