PDA

View Full Version : p4c800 vdimm mod for DDR472 pc3200

AZN
05-27-2003, 09:23 PM
thanks to major slaughter for the vdimm lessons.

this is my pc3200 buffalo 256mb for $45 at newegg. its rated at cas2.5 ddr400. well for us ocers thats just not enough. I did the ram volt mod and now im pumping 3.09v and so far ive got it at ddr472 with fast timmings. i just about maxed my chip so ill have to use 1:1 to see how high this ram really will go. this is my main rig but i swap ram with my backuprig just to see if the pc3200 sticks will do the same as my pc3700 sticks and yes it does.
even at 3.09v the ram doesnt get hot its still slightly warm.

http://home.attbi.com/~aznakano1/309.jpg
Major
05-27-2003, 09:26 PM
Good going AZN, thats outragous bandwidth !

see if you can get to 7000 ! try the beta bios 1007.006 if your not already it really imporves mem performance. ;)
AZN
05-27-2003, 09:40 PM
yep using .006 but i loaded tons of crap on my OS already so im starting to see the crawl already :) jk its fast as hell but when it was just finished installing OS i hit 11k mips at 290fsb but u know when u got more junk on ur HD scores will drop slightly. im very happy at 290fsb ddr 464 at 2-2-2-6. 7k will take like ddr 500+ right? more like ddr515 with fast timmings.
ztop
05-27-2003, 11:55 PM
can iou give me an immage of v-dimm mod for p4c800?
Major
05-28-2003, 05:19 AM
here is a thread on the mod ztop

http://www.xtremesystems.org/forums/showthread.php?s=&threadid=13402
taco
05-28-2003, 05:29 AM
lookin good azn ;)

welcome to xtreme. :toast:
Major
05-28-2003, 05:38 AM
Hey taco where have you been hideing ??
Dracula's PC
05-28-2003, 08:14 AM
I think this is a Good work..

http://www.hwtest.com/images/articles/p4csandra.gif


A Good Result for P4C800 with Pentium 4 2.4Ghz and Memory Kingston Pc3500 HipeX....

:eek:

Could Give ME your opinion Please?

PS.

I'm new in this forum, Bye at all.....

Fabio from Italy...
ztop
05-28-2003, 08:37 AM
impressive!!:slobber: ..v-mem mod works fine:banana:
BrainStorm
05-28-2003, 08:37 AM
Dracula's PC (Fabio), welcome to Xtreme! :toast:

Very nice work. I just cannot believe the memory bandwidth these Canterwoods/PIVs are cranking out :slobber:
Major
05-28-2003, 08:40 AM
Dracula's PC welcome !!!!! glad to see you here !;)

Thats a nice OC and like BrainStorm said the Bandwidth is just unreal !!!

How about some more details about your cooling and voltages fabio !!
bigjohns97
05-28-2003, 09:11 AM
Originally posted by Dracula's PC
I think this is a Good work..

http://www.hwtest.com/images/articles/p4csandra.gif


A Good Result for P4C800 with Pentium 4 2.4Ghz and Memory Kingston Pc3500 HipeX....

:eek:

Could Give ME your opinion Please?

PS.

I'm new in this forum, Bye at all.....

Fabio from Italy...


d00d show me some unbuffered benchies
taco
05-28-2003, 10:34 AM
ive just been keepin it on the DL major.. i got no new goodies to show off really. :( been kinda busy too.

hopin to sell some stuff, so i can get a 2.4C and a P4P800.. by the way, is there any known mods so far for the P4P? or would they just be about the same as the P4C?
Blue078
05-28-2003, 03:24 PM
AZN and Dracula's PC NICE WORK !!:toast:

My 2.4C just wont go that high, those are nice chips you guys have:)
Major
05-28-2003, 06:21 PM
Originally posted by taco
ive just been keepin it on the DL major.. i got no new goodies to show off really. :( been kinda busy too.

hopin to sell some stuff, so i can get a 2.4C and a P4P800.. by the way, is there any known mods so far for the P4P? or would they just be about the same as the P4C?

PM Opp he was going to check on his P4P800 to see if the mod was the same, he said it was the same chip in the same location on the board so most likely they will be identical for vmem