7300GT under SS_SLi

[Big_Sam]

http://img222.imageshack.us/img222/9061/01rt9.th.jpg (http://img222.imageshack.us/my.php?image=01rt9.jpg)http://img130.imageshack.us/img130/5372/04al2.th.jpg (http://img130.imageshack.us/my.php?image=04al2.jpg)http://img130.imageshack.us/img130/7283/03ov0.th.jpg (http://img130.imageshack.us/my.php?image=03ov0.jpg)

http://service.futuremark.com/compare?3dm05=2726508
http://img440.imageshack.us/img440/764/05m14403sn9.gif

http://service.futuremark.com/compare?3dm06=1312018
http://img440.imageshack.us/img440/5100/06m7755sf9.gif

[massman]

Those cards are really impressive :slobber:

Voltages ?

[Big_Sam]

Those cards are really impressive :slobber:

Voltages ?


GPUs - 1.8V, and memory - stock, no Vmem mod.

[Baron]

Any temps please. GPUs and CPU.

[Big_Sam]

Any temps please. GPUs and CPU.

CPU - idle -40C, full load -37C.
GPUs - 2D -38C, 3D (full load) -33C.

[Postal Dude]

WIpes the floor with my single 7800GT. Although i think your SS and X6800 had somethin to do with that. Congrats. Very xtreme!

[massman]

GPUs - 1.8V, and memory - stock, no Vmem mod.

Are those the Galaxy or the Palit cards ?

[Big_Sam]

Are those the Galaxy or the Palit cards ?

Palit.

[kiwi]

CPU - idle -40C, full load -37C.
GPUs - 2D -38C, 3D (full load) -33C.

What probes are those? How come so little difference between idle and load?

[Big_Sam]

What probes are those? How come so little difference between idle and load?

This is evaps temps.
I use very very short cap tubes for such conditions... and SS for CPU is charged with R410A, and SLi phase-change with R502.
Evap temps on air is -44C for CPU, and -40C on GPU evaps.

[blind_ripper]

big_sam can u test to see whats core temp load with riva tunner ? if core gos above 0°Core not ;) .
tryed mine one LN² little bit bugged , container had pore contact and i hope i did not frai the core or the mems .
il test tomorrow ;)

[Gam3Ra]

Russia OC'ers are craaazy maaan :banana:
Now is time for the memory! Will give some extra 200-300points

[Big_Sam]

big_sam can u test to see whats core temp load with riva tunner ? if core gos above 0°Core not ;) .
tryed mine one LN² little bit bugged , container had pore contact and i hope i did not frai the core or the mems .
il test tomorrow ;)

Now I don't remember what there was a temperature with 7300, but I have screen with 7600:
http://img105.imageshack.us/img105/8707/rttempsol8.th.gif (http://img105.imageshack.us/my.php?image=rttempsol8.gif)

With 7300 temperature was lower.

[Fr3ak]

Nice scores, but I was expecting more with that kinda cooling :/

Guess Iw as kinda lucky with my cards being able to run 950mhz with 1.6V on air.

The memory OC is great for "stock" vmem.

[Big_Sam]

Nice scores, but I was expecting more with that kinda cooling :/

Guess Iw as kinda lucky with my cards being able to run 950mhz with 1.6V on air.

The memory OC is great for "stock" vmem.

I know about your wonderful cards :)
Do you have any results with this single / SLi cards in 05Mark on such GPUs frequencies?
I saw your results in ORB but there there is no information about frequencies.


I know a lot of people who tried to OC 7300 and all received approximately identical results for A2 GPU revision - max 800MHz at 1.7V on air.

[zakelwe]

Excellent work :toast: Finally took down TheStilt's long time 13k score on older build of 05.

Looking forward to your 03 and 2001 scores, should be very impressive indeed. :cool: :)

Regards

Andy

[Fr3ak]

I havent published my runs witn 950Mhz+, because I was still waiting for the ram someone sent me in october, but as it is still not here, I am getting the impression it got lost on the way :/

Single card results with all information are posted here:
http://www.xtremesystems.org/forums/showthread.php?t=111799&page=3

SLi results here:
http://www.xtremesystems.org/forums/showthread.php?t=112886

Those were with 1.5V.
I guess I will run them on 1.8V, though I only have 1gb single channel ram. Wont result in the best possible scores, but oh well.

What I noticed that is doesnt make much of a change above 1.6V.

[Big_Sam]

Thanks a lot. I have absolutely forgot about these threads. :)

[k|ngp|n]

Looking forward to your 03 and 2001 scores, should be very impressive indeed. :cool: :)

Second that...awesome work Sam :toast: Those cards are tiny :)

[Big_Sam]

Second that...awesome work Sam :toast: Those cards are tiny :)

Many thanks Vince :)

Your knowledge about PCI-E frequency were very much useful to me in this benching session :toast:

[Big_Sam]

One more result... now it's 03Mark:

http://service.futuremark.com/compare?2k3=5232819

http://img156.imageshack.us/img156/6016/03m31857rk7.gif

[aspstein]

Wow nice results Big Sam :D
Whats the PCIe frequency on the 03 run there?

[Big_Sam]

Wow nice results Big Sam :D
Whats the PCIe frequency on the 03 run there?

120Mhz for both cards.




And finaly 01Mark: http://service.futuremark.com/compare?2k1=9157229

http://img228.imageshack.us/img228/8943/01mslimh2.gif

[zakelwe]

:toast:

Low end cards now surpassing older high end cards ( with the help of Conroe powwaa )

What's the highest performing cards you have at the moment Sam? 7800? 7900? 8800 ? Any testing to come ?

Regards

Andy

[Fr3ak]

Nice. 5k more than I got. Thats 1k per every 100Mhz more on the CPU :)

[Big_Sam]

:toast:

Low end cards now surpassing older high end cards ( with the help of Conroe powwaa )

What's the highest performing cards you have at the moment Sam? 7800? 7900? 8800 ? Any testing to come ?

Regards

Andy


Now have remained only 7600GT,

I'll be back with them and I shall try to push GPUs up to 950Mhz - 1Ghz. :D

Now I know a little secret for great OCing. :D

And in one month I plan to try any of 8800.

[over@locker886]

Nice scores, good work Big_Sam:toast:

I love these cards(7300GT DDR3 serias):)

[xB0n3s]

Impressive scores with low end cards Big_Sam. Can't wait to see what results will you obtain with a 8800 :toast:

[master_gokhan]

wow:slobber:

[Extera]

Nice cooling hardware you have there :eek:

[SoF]

I love it when anybody takes low-end cards to the limit in the right way. really good work there man :toast:

[Big_Sam]

Many thanks guys. :)

I'm glad that it was pleasant to you. :toast:

[2fink]

great results....

but now i have the urge to play and bench with my 7300gt once more *argh* should learn...

[zakelwe]

I think a lot of people including myself, big Sam and Fr3ak are now awaiting the 8XXX midrange series. I think I might go for the 8300GS or 8400GS and try and find some with GDDR3, they are bound to be bandwidth limited on DDR2. Searching out the gems is half the fun at this level.

I need another motherboard as well as my EVGA died , can't RMA it as it was my dodgy VDIMM mod that killed it :D

Luckily it looks like Oskar Woo has timed it's demise well and might a nice 680i board for me to buy soon. :)

air cooled X6800 @4Ghz
DFI 680
air cooled 8300GS SLI with gpu mods
The coldest April in living memory thanks to Global Cooling. :cool:

Sounds like an A-team style plan

Regards

BJ Mynackas

[2fink]

I think a lot of people including myself, big Sam and Fr3ak are now awaiting the 8XXX midrange series. I think I might go for the 8300GS or 8400GS and try and find some with GDDR3, they are bound to be bandwidth limited on DDR2. Searching out the gems is half the fun at this level.


me2, i cant wait to have a new videocard and the 8300 should be cheap as all low-end cards :)

[Fr3ak]

I learned a lot from Pedro, Hipro, Shamino and the other guys, so I hope I will be more competitive this time.

I might bench Galaxy cards this time ;)

So we are going the GS way this time? Thought we would get the GTs.
Might be benching booth in the end, but I dunno when I will be able to affort a SLI board.

[zakelwe]

I learned a lot from Pedro, Hipro, Shamino and the other guys, so I hope I will be more competitive this time.

I might bench Galaxy cards this time ;)

So we are going the GS way this time? Thought we would get the GTs.
Might be benching booth in the end, but I dunno when I will be able to affort a SLI board.

Benching all would be great. I normally nowadays bench the cheapest first and then by the time I get around to the midrange hopefully they will be down in price. I'm still looking for 80nm 7600GT but so few in the UK apart from the XXX Fatal1ty one which maybe 80nm....

Regards

Andy

[2fink]

I learned a lot from Pedro, Hipro, Shamino and the other guys, so I hope I will be more competitive this time.

I might bench Galaxy cards this time ;)

So we are going the GS way this time? Thought we would get the GTs.
Might be benching booth in the end, but I dunno when I will be able to affort a SLI board.

pfingsten or summer-holidays would be great for some benching? what do you thing? ;)
now its not a problem to travel to you... ;) and then we will own the orb :P

[Fr3ak]

Ok, I just have to get 300€ for a SLi board, 200€ for the cards, 100€ for 1gb of ram and 800€ for a x6800 out if nowhere and I am ready to go.