e6700 meets LD Cascade

[Shark-357]

Yesterday was a good day to test new Litlledevil`s Cascade :D
And let me tell u the temps were awesome 1.85V -96-97°C on Spi Load.

So here are the results that me and LD have come up with..
Bare in mind, that this was only testing and i still got e6850es, e4300es + a few others sitting right next to me that are begging to test them out on the cascade :toast:

HW:
E6700 retail @ 1.75V (5060Mhz)
Asus P5B-Dlx (NB cooled with 80W pelt and WC)
G.Skill 2x1GB HZ
Liberty 620W
WD 80GB


Here is the setup

http://img157.imageshack.us/img157/2781/setupiv8.th.jpg (http://img157.imageshack.us/my.php?image=setupiv8.jpg)


Temperatures

http://img214.imageshack.us/img214/4346/idleek8.th.jpg (http://img214.imageshack.us/my.php?image=idleek8.jpg)


http://img254.imageshack.us/img254/1470/biosli0.th.jpg (http://img254.imageshack.us/my.php?image=biosli0.jpg)


http://img251.imageshack.us/img251/7479/spirunst9.th.jpg (http://img251.imageshack.us/my.php?image=spirunst9.jpg)


And a Spi1M @ 5060Mhz 10.109 (we had 10.063 @ 5080Mhz but i didnt save the result)

http://img404.imageshack.us/img404/9246/spi1m5060mhznh7.th.jpg (http://img404.imageshack.us/my.php?image=spi1m5060mhznh7.jpg)

[PcCI2iminal]

very nice and keep pushing

:)

[before]

Nice stuff! :)

[makatee]

Wow! Those results are awesome and that cascade is very nice as well. :woot:

[bazx]

so close to sub 10

5g cascade is very good well done

[LittleDevil]

Thanks guys, we have problems with FSB 500+ on P5B DLX :(

This weekend we hope to reach 9.xxx sec with that 6700.

regards

[anarinsk]

Nice. Go for sub 10s!

[Shark-357]

Thx guys. We will try for sub 10s this weekend with this amazing e6700 L628B151.

But the board is very weird coz 510fsb is max what i can get out of it..(anybody got any tips for higher FSB?)

We found another issue yesterday, e6850 wont boot in P5B-Dlx :slapass: (It worked in my P5W64 but the board is dead now so i can`t use the cpu :stick: and DFI RD600 wont be here for at least two weeks... )

[funkflix]

Nice results and cascade! :toast:

Because of max. FSB, it could be ur CPU too.. Just a few C2D do > 5xxMHz. :( My ES stops at ~ 509MHz.

[Shark-357]

Well its not the CPU, i tested my 6600 and it wouldnt go over 510fsb also...
I think the MB is bad or something coz 510fsb is really low compared to others that are over 550+ fsb :rolleyes:

EDIT:
Well i got another ES CPU today QX6700 with unlocked multi i will test it tomorrow and will see how it goes.

[shimmishim]

have you tried vmch mod yet? it'll give more voltage and i'm sure the pelt+h2o could handle increased voltage.

i replaced my NB with a simple swiftech mcx-159u and i can do 540 1:1 with my 6700ES (1M superpi that is)

[Shark-357]

The board is fully moded (Vcore, Vmch, Vdimm)
I tried Vmch all the way up to 1.9V with no FSB increase, also Vdimm up to 2.8V and Vcore 1.9V with no results :confused:

[BigJoe]

Great results from SLOVENIA. Well done neighbors :wave:

[LittleDevil]

@BigJoe: Thanks wery much!

regards