Uni Team: 2007 1st run, E6600 WR=600*9

[VictorWang]

Uni Team: Unique/Unite/Union,
4 top Overclkers in China.
our 1st run in 2007 here:

platform:
http://vic.expreview.com/attachment/1168020008_1.jpg

3dmark01:
http://vic.expreview.com/attachment/1168015961_0.jpg

3dmark05:
http://vic.expreview.com/attachment/1168016045_0.jpg

[runk]

good work,good fsb and amazing e6600!:slobber:

[Dani]

Congrats to Uni Team :D
..is that with your "special Alu" container ;)

[alexio]

Very nice work ;)

[VictorWang]

and my team member Uni-yangxun (owner of E6300 WR)
achieved WR E6600=600*9=5400mhz
though just a little bit higher than Turkey OC Team :p:

pi_1m=592*9=9.625sec
cpuz link:
http://valid.x86-secret.com/show_oc?id=155624

http://www.xtremesystems.org/forums/attachment.php?attachmentid=54696&stc=1&d=1168530100

http://www.xtremesystems.org/forums/attachment.php?attachmentid=54697&stc=1&d=1168530100

[before]

Congrats for these insane clocks! :)

Is there a reason for running @ only -103.5C? Cold-bug or something?

I hope to come close this week end under LN²; I reached @5229MHz under cascade with -82C evap temp. ;) BTW 600FSB is insane, and I only have a P965 C1 motherboard.

[VictorWang]

all results above are not done with our SPECIAL alu_pot.
'coz it has not finished yet. will be on show 10days later.
then... 5Ghz+ QX6700 will be it's slave :D

[hey]

and my team member Uni-yangxun (owner of E6300 WR)
achieved WR E6600=600*9=5400mhz
though just a little bit higher than Turkey OC Team :p:

pi_1m=592*9=9.625sec
cpuz link:
http://valid.x86-secret.com/show_oc?id=155624

http://www.xtremesystems.org/forums/attachment.php?attachmentid=54696&stc=1&d=1168530100

http://www.xtremesystems.org/forums/attachment.php?attachmentid=54697&stc=1&d=1168530100





nice to see some challenging scores! ,,
congrats!:toast:

[LittleDevil]

Very nice speed ;)

regards

[VictorWang]

nice to see some challenging scores! ,,
congrats!:toast:

:D thx, we've tried 3pcs E6600 (1*567, 1*580, 1*602),
and still 4pcs left not tested under LN2.
will have more results in the next 2weeks :D

[hey]

:D thx, we've tried 3pcs E6600 (1*567, 1*580, 1*602),
and still 4pcs left not tested under LN2.
will have more results in the next 2weeks :D

%33,,you re lucky!:D
i hope we ll have more results,too,,:D

[principino1984]

amazing chip man! you did an awesome score!

Marco

[Dani]

:D thx, we've tried 3pcs E6600 (1*567, 1*580, 1*602),
and still 4pcs left not tested under LN2.
will have more results in the next 2weeks :D

Can you please tell us those E6600 stepping :eek:
L6xxA/Bxxx and so on :toast:

[over@locker886]

Very good job Uni Team:toast:

Me too will little play some LN2, end of Januar.:)

[VictorWang]

Can you please tell us those E6600 stepping :eek:
L6xxA/Bxxx and so on :toast:
L628B121
L628B127
L629A531
L629B380/1

[Dani]

Thanks Victor :)

[boblemagnifique]

L628B121
L628B127
L629A531
L629B380/1


Congratz Overclocking :toast:

Great , i have 628B121 and 628B127 but Fsb limit (566mhz :( )

My ex L629A531 (FSB limit 575)

I Buy L629B365 & L629B380 , I test soon on P5B dlx (Fsb 618 a mdcurl) with Caskade 3 stages and LN2 :toast:

[Digiali]

congrats:)

[justin_c]

congratulations! what waterblock is being used on the 8800gtx? and the motherboard is being mounted ontop of? some modular tech station? platform specs please.

[Shark-357]

Congrats guys :toast:
Thats just insane 9x600 :woot:

[Gebba]

omg! that cpu is extream!!

nice pics btw :D

[4Qman]

Awsome results,

VictorWang Was the Board Volt modded to obtain that FSB, what voltages used if so please. :)

Does the CPU have a factor regards high FSB or is it simply the board?

[dogsx2]

Great clocks from China. :toast:

Waiting for more.:D

[Walkerak]

Great... V.W~~~~

[Walkerak]

Great....V.W~~~~~~

[VictorWang]

thx guys.
from our point of view, to achieve high fsb, CPU is the most important factor.
we have lot of great chips(all arround 5.3Ghz) but could not get higher than 540fsb(E67/X68).
for Asus mobo, we think almost every board has the ability to reach 600fsb.
few of them can do 630~640fsb :D

[rick_fx]

Congrats on the insane clocks and high fsb :toast:

[Boble76]

E6600 @ 5400MHz ! ?! ! :slobber:
GJ China!
More coming? :stick:

[Blknoel]

Gratzzz !!! Cherrypicked boards and chips =O

OT: No University?

[4Qman]

thx guys.
from our point of view, to achieve high fsb, CPU is the most important factor.
we have lot of great chips(all arround 5.3Ghz) but could not get higher than 540fsb(E67/X68).
for Asus mobo, we think almost every board has the ability to reach 600fsb.
few of them can do 630~640fsb :D

Thanks for the answer dude, ;)

[milkcafe]

E6300 @ 4442.74MHz

635fsb

done by yangxun8774 , pconline.com.cn

http://valid.x86-secret.com/show_oc.php?id=148555

[Mi©hel]

clocks::eek2: :eek2: :eek2: :eek2: :eek2: :eek2:

idea of trying it::toast: :toast: :toast: :toast: :toast:

well done:D

[metro.cl]

Congrats Victor :)

keep pushing it :)

[PcCI2iminal]

very impressive!!!!

nice job as usual

[fastback88]

just totally unreal

[T07N]

p5b dlx right? wow

[anarinsk]

:clap: :clap: :clap: What a great... !

[dinos22]

E6300 @ 4442.74MHz

635fsb

done by yangxun8774 , pconline.com.cn

http://valid.x86-secret.com/show_oc.php?id=148555
:clap: :clap: :clap: :clap: :clap: