1700+ Dlt3c Jiuhb 0310 Xpmw

[chr!s]

Hi

Anybody who has the 1700+ CPU with the following stepping?
DLT3C JIUHB 0310 XPMW

here in germany these CPUs are currently avaiable and some users get more than 2.5ghz with this CPU :slobber:
Cooled by water, but this CPU needs a very low voltage that you should be able to cool with air.

Can you post your overclocks with this stepping?

thanks :-)

At the moment I'm running a 0308 XPMW on air:

http://people.freenet.de/clan-eae/cpu2342.JPG

cooled on air @ 62°C @ 1.75V
abit nf7-s

the abit nf7-s undervolts... in the bios I have choosed 1.825V
when I put 1.9V on it, my machine shuts down with a warn signal... (lower frequency, max temp 60°C)

[Firelord-OCHW]

Mines arriving tomorrow so I shall let you know :D

[C0oL]

My 0308 XPMW arrives in the morning BTW :) Let's hope it kicks some ass!

Dean

[Firelord-OCHW]

Where did you order from C0ol??

[TheDude]

Got mine today...been playing with it in the Prommie...here's my best so far

[will_perdikakis]

TheDude,

Have you experienced that these boards (NF7-S rev 2.0) really hate high volts with these chips?

http://www.modders.net/uploads/will_perdikakis/2800.JPG

This is 100% stable at 1.9V, but the mobo really hates anything above these volts, will not POST.

[SupaMan]

Originally posted by TheDude
Got mine today...been playing with it in the Prommie...here's my best so far

thats the BEST you can do? what is the world coming to...geez ;)

edit: y so low of an fsb?

[TheDude]

will_perdikakis

Yes I have noticed that, but it seems I have to ram it with 2+ volts and then back off before I can get up in the 2.7 to 2.8+ range. If you are cooling with Prommie and can't post at high volts..get siren or lockup...try turning Prom off at PSU, wait about 10 minutes and boot it up again. I got into windows that way at 2.3 volts....then backed off voltage and got higher OC at lower volts.

Supaman,

My HyperX won't do over about 215 fsb with this board, I have some twinmos on the way. I was trying for 100% OC and I can't get there with high FSB. That might change with the new ram.

I haven't done any mods at all yet, unless you count active cooling on both bridges. I'm going to try one of these 1700s in Bowmans old rig, frosty NB should help. :D

[Firelord-OCHW]

Right it arrived yesterday while at work and its actually an: -

AXDA1700DLT3C 9571376250721
JIUHB0308SPMW

Are the SPMWs any good??

[chr!s]

Hi

can you probably post some overclocks, which are stable with prime95 or "benchmark stable" ?

here I have a pc mark bench

http://people.freenet.de/clan-eae/pcmark.JPG

http://service.futuremark.com/compare?pcm=1286297


I can't say how godd the SPMW is... you have to test it ;-)

[Firelord-OCHW]

As soon as I get to push it properly and I'm back from work I'll benchie it etc :)
I have done some pelimanary testing and completes 3D Mark @ 2.42GHz (11.5*210) but 210FSB is stable so got to do some playing :)

Specs: -


ABIT NF7-S V1.2
AMD XP1700+ JIUHB DLT3C SPMW
2 x 256MB XMS3200 @ 4-2-2-2 (FSB Testing)
ThermalRight AX7 with TT Smart Case Fan II with cool mod
TTGI Hiper UK 420 Watt PSU

[MrLavender]

Ewok has a 0308SPMW over 2.5GHz on air. Mine does 2.4.

[Firelord-OCHW]

I have just posted in his post :)

[MrLavender]

Yeah, looks like you got a better one than me as well...:(

[Redskin]

Here is my baby....

http://www.geocities.com/blufide/BILD1.JPG

Not stable, only a screeni.
stable@ *~2500@1.78v

[TheDude]

Originally posted by Redskin
Here is my baby....

[IMG][http://www.geocities.com/blufide/BILD1.JPG/IM G]

Here's what I get from your link : This page is not available.

[Redskin]

here
its a WPMW 0310 xxxxxxx25xxxx

[TheDude]

sweet :D

What cooling? Air?

[Redskin]

no watercooling.

I think 2600 Mhz is still stable @ 1.9v but then i have ~50°C.

[TheDude]

I run a water rig 24/7 at that temp....haven't had any probs with it yet, think I'm going to take the Ti4600 out of the loop tho as I don't bench it or anything...maybe cool it down some.:D

[Firelord-OCHW]

It well do :D

Nice one Redskin :)

[Redskin]

With a prommy it will be no problem to get more than 2700 mhz stable. But it's to expensive for me.

[chr!s]

@redskin

where did you bought this cpu ?

[Redskin]

I bought my chip at www.com-tra.de few weeks ago.

[chr!s]

I bought my chip there, too...
But there aren't 0310 CPU's avaiable this moment...

I think my next CPU is a 2500+ barton... everyone here has a 1700+ .... boring :D

[DoGMaN]

Here is mine so far.

http://thecrucible.ca/images/1700+_2425.jpg