New E6600- Overclocking Potential

[Premmer]

Just completed installation. Running at default settings. CPU batch number is L632A659. Has anyone had any OC experience with this batch? Any estimates on OC potential given my system specs and CPU batch number?

Also noted that Vcore @ idle is ~1.14V and ~1.29V running PRIME 95 as reported by CPU-Z 1.38. Is that a typical Conroe characteristic?


Intel Core 2 E6600|Asus P5B Deluxe|2x Crucial Ballistix 1G DDR2 6400|4 x Seagate 7200.10 250G HDD, SATA II, Areca ARC1210 RAID 0
Hitachi 80G HDD, SATA II - Backup|Saphire X1300XT 256M Video Card|Big Typhoon CPU Cooler|Antec Neopower 480W|Lian-Li PC-65B

[marauder16]

I have a L632A407 - same week as yours, I'll post my results ASA I get my board :D
L632A (B2) should be a good clocker, so have I heard ;)

[Lestat]

hey premmer it will take you longer to sit and wait for people to tell you their results, which are absolutely no indication of what your results might be,
just go overclock the board and then tell is how well it does.

i mean how many 6600/P5B threads do we need here, jesus use the friggin search button kiddo

[yaddam205]

Not impressed.

At first it looked ok, I was booting @ 3.6 1.27v and had a Dual Sp04, for 2 hours worked fine.

Now I am having trouble keeping it stable at the same speed 1.55v .27 no longer boots.

Strangely enough thou, I gave 3.8 at 1.55v a go and ran orthos without fail for 16 hours.