Intel Core Temperature Monitor plugin for MBM5 (WinXP) - download now!

[freecableguy]

Version 1.1 Available Now! MBM5 Update 3 Available Now!

Core(TM) Temperature Monitor Plugin for Motherboard Monitor 5
Distributed under license by The Tech Repository (www.thetechrepository.com).
Copyright (C) 2006 freecableguy (FCG). All Rights Reserved.

Monitor actual Core(TM) (DTS) temperatures directly from MBM5!
Supports Yonah, Conroe/Allendale/Woodcrest/Merom, and Kentsfield/Clovertown.

This plugin for MBM5 allows the user to simultaneously monitor up to 16 cores using Intel Core(TM) technology. All sensor update intervals, logging options, alarm settings, and display characteristics can be set through the popular MBM5 interface to be displayed along-side all other motherboard and video card temperatures/data. Free for use, free for distibution. Easy to setup and a great aid to overclockers and enthusiasts alike. Download version 1.1 now!

Motherboard Monitor 5 Update 3 is available for download exclusively from The Tech Repository! This update is cumulative and does not require any other updates to be installed prior to patching. This update correct a general incompatability between version 1.0 of the Core(TM) Temp plugin and the CPU usage display setting that resulted in incorrect temperatures for one or more cores.


http://www.thetechrepository.com/attachment.php?attachmentid=325&stc=1&d=1165883480


Version History:
---------------------------------------------------------------

12/02/2006 - 1.0 - initial release, coreplugin.dll v1.0.0.0010, coretemp.sys v1.0.0.0005

12/10/2006 - 1.1 - coreplugin.dll v1.0.0.0036, coretemp.sys v1.0.0.0006

- Corrected bug where some quad-core processors would display core temperatures 15C too low as a results of incorrect Tjunction calculation.
- Added support for internal display and calculation of CPU usage. Native MBM5 CPU usage support is disabled when the plugin is loaded when using MBM5 Update 3.
- Increased maximum core support to 16 cores.
- Changed default sensor numbers so that cores temperatures shown in the system tray can be read in order from left to right starting with 'Core 0'.


Download Core(TM) Temp plugin v1.1 and MBM5 Update 3 from here (http://www.thetechrepository.com/showthread.php?t=74)

-FCG

[fhpchris]

I think it would be cool to be able to calibrate this temperature with a nice Fluke thermo or etc, because these bad onboard sensor readings are driving me crazy:slapass:

[One_Hertz]

will your plugin still not read negatives?

[lawrywild]

I'll volunteer.

[BobyTT]

FCG i am in for QX6700

[freecableguy]

will your plugin still not read negatives?

the plugin reports what the CPU reports. no program will correct what appears to be a hardware limitation.

ALSO, I need anyone interested to please email me so that I can reply with the files attached. This will not be an open beta test at this time. I will not be posting the files for download until ready for release.

[Supertim0r]

email sent

[lawrywild]

As requested

I loaded one core with TAT 100% and the other with WCG and as you README says, the plugin reports both core 1 temps.

Screenshot:

http://img447.imageshack.us/img447/6560/coretempmbm5gp3.png

[freecableguy]

As requested

I loaded one core with TAT 100% and the other with WCG and as you README says, the plugin reports both core 1 temps.

Screenshot:

http://img447.imageshack.us/img447/6560/coretempmbm5gp3.png

nice, i hardcoded the drive to do that for testing

i will get you a new driver in just a sec

-FCG

[lawrywild]

New drivers does the same thing on the other core:

http://img447.imageshack.us/img447/6743/coretempmbm5tz2.png

[freecableguy]

New drivers does the same thing on the other core:

http://img447.imageshack.us/img447/6743/coretempmbm5tz2.png

perfect, final driver coming soon

[lawrywild]

I have to go to bed soon lol, be quick

[freecableguy]

I have to go to bed soon lol, be quick

just sent! should show both cores now!

[lawrywild]

Same as rev.1

http://img447.imageshack.us/img447/1671/coretempmbm5ga9.png

[freecableguy]

Same as rev.1

http://img447.imageshack.us/img447/1671/coretempmbm5ga9.png

whoops, found a bug
new one coming, don't fall asleep on me yet!

[lawrywild]

Maybe you could write 2 seperate drivers? 1 for each core?

edit: lol ok I'm waiting up

[lawrywild]

Works perfect, well done :thumbsup:

http://img447.imageshack.us/img447/9994/coretempmbm5sd1.png

[freecableguy]

Works perfect, well done :thumbsup:

http://img447.imageshack.us/img447/9994/coretempmbm5sd1.png


:D

thanks for the help testing. Final version to be released soon. :)

-FCG

[lawrywild]

No problem, cool :)

[Millyons]

oh mannn u know im up for it......sending the mail now


got it :) setting up

[Millyons]

only core #1 temp on for both cores

did u send me a wrong version? if it matters im on P5Bdlx

[MadMikeSS]

I'm down with beta testing.

[Supertim0r]

I wish it read vcore on Bad Axe 2 :)

[Millyons]

High / low page doesnt work, it just shows the curent temp for all high/low/avg

the log also

[Millyons]

I wish it read vcore on Bad Axe 2 :)

did u try it, does it show any voltages.....if you want to continue discusion about that we can do it here:
http://www.xtremesystems.org/forums/showthread.php?t=121183

[loc.o]

Got it working for now. Cores show 0 or 71 with mach.

[freecableguy]

High / low page doesnt work, it just shows the curent temp for all high/low/avg

the log also

log functions and high/low are disabled for testing. they will included in final version.

[The Nemesis]

Is this 975 & 965 only or will it work on 680i?

[Millyons]

log functions and high/low are disabled for testing. they will included in final version.


man this is awsome, that will be dope, although even with the new file u sent me i still get core #1 temps on both sensors, still no core #0 temps

[freecableguy]

Is this 975 & 965 only or will it work on 680i?

motherboard independent. just requires a CPU based on Intel Core technology (Yonah, Merom, Conroe, Allendale, Woodcrest, Kentsfield, Clovertown, etc)

-FCG

[MadMikeSS]

Ok, so this all being done for the C2D chip, anyone know a site where I can find a config setup for my Gigabyte GA-965P-S3?

[freecableguy]

I still need the guys with the quad cores to test and post up. My quad core is not installed right now.

[Supertim0r]

im in for quad test...drop me an email

Motherboard Monitor 5.3.7.0 is lastest ?

[GnomeTank]

Out of curiosity, is there an updated MBM motherboard list or something? If not, what should I tell it my 680i is? Or will it even work with the 680i? :P

[Hassan]

I have a Kent and a Clovertown setup

[Millyons]

Out of curiosity, is there an updated MBM motherboard list or something? If not, what should I tell it my 680i is? Or will it even work with the 680i? :P


no there is no updated MBM, but i Might work on any newer board, it all depends what monitoring chip is used, only thing is that it probably has to be adjusted to show right values and it takes some time figuring out what values are witch, when i set it up for P5BDlx i had to adjust all voltages, like 12v rail was showing 3v

[powerBar]

Ok, so this all being done for the C2D chip, anyone know a site where I can find a config setup for my Gigabyte GA-965P-S3?

MBM5 on the S3 wolud be great - please post a link if you find some config files. Btw. I remember someone here on XS posting to have (D)S3 configured with MBM.

[Millyons]

MBM5 on the S3 wolud be great - please post a link if you find some config files. Btw. I remember someone here on XS posting to have (D)S3 configured with MBM.



if i have time later on today ill post how to make MBM work on any board (if its possible) its really not hard just takes time

[lawrywild]

Just tested your final version Kris, but it shows Core 0 - 0'C Core 1 - 0'C :(

[powerBar]

if i have time later on today ill post how to make MBM work on any board (if its possible) its really not hard just takes time

That'd be awesome! I have mbm5 installed on all of my pcs but only on my latest addition (gigabyte s3) refuses to cooperate. :slapass:

[funkflix]

Tested it on my P5B now, but i get some wired results here too. Don't know if i installed it correctly, but i think so!

http://img170.imageshack.us/img170/5177/mbm5bh1.jpg

82°C + 22°C and not showing it in the dashboard? :confused:

Edit: 22°C should match Core 1, it is the same temperature on CoreTemp.

[freecableguy]

Just tested your final version Kris, but it shows Core 0 - 0'C Core 1 - 0'C :(

probably a driver load issue. i changed it from hardcoded to API read. can you give me the full path to you drivers directory? Should be something like "C:\WINDOWS\system32\drivers"

-FCG

[freecableguy]

Tested it on my P5B now, but i get some wired results here too. Don't know if i installed it correctly, but i think so!

http://img170.imageshack.us/img170/5177/mbm5bh1.jpg

82°C + 22°C and not showing it in teh dashboard? :confused:

my plugin has absolutely nothing to do with dashboard display. make sure you have expanded the dashboard enough for it to show (or it could be UNDER one of the other tiles - check it out). those temperatures are wild. run Core Temp on your system and see what it reports. Also, please tell me what OS you are running (with what SP) and your CPU type.

[funkflix]

my plugin has absolutely nothing to do with dashboard display. make sure you have expanded the dashboard enough for it to show (or it could be UNDER one of the other tiles - check it out). those temperatures are wild. run Core Temp on your system and see what it reports. Also, please tell me what OS you are running (with what SP) and your CPU type.

Ok, found a Bug here! Under load the Core 1 reading starting to work, but on idle it goes up to 8x°C. I'm running XP Prof. SP2.

http://img79.imageshack.us/img79/9686/mbm5ph5.jpg

[freecableguy]

Ok, found a Bug here! Under load the Core 1 reading starting to work, but on idle it goes up to 8x°C. I'm running XP Prof. SP2.

http://img79.imageshack.us/img79/9686/mbm5ph5.jpg

that's definately good to know. the strange thing is that the code has nothing to do with load or cooling or anything. the driver simply retrieves the data and passes it to the plugin which passes it to MBM5. What exact does the 8x read say? if its greater than 85 then something is definately wrong as 85 is the max that should be reportable (anything greater would mean that the DTS sensor is a negative number...)

-FCG

[funkflix]

that's definately good to know. the strange thing is that the code has nothing to do with load or cooling or anything. the driver simply retrieves the data and passes it to the plugin which passes it to MBM5. What exact does the 8x read say? if its greater than 85 then something is definately wrong as 85 is the max that should be reportable (anything greater would mean that the DTS sensor is a negative number...)

-FCG

It changes between 83 - 85°C. CoreTemp reports 21°C for this Core.

Edit: Sometimes the temperature in task switches to the correct 21°C. Maybe one time in 5 minutes, but then it goes back to the 85°C. Anyway, thanks for ur effort, i'm at work now, be back in a few hours. :)

[lawrywild]

Kris,

MBM Update 2 + Coretemp plugin = :woot:

http://img178.imageshack.us/img178/7225/coretempmbm5cd5.png

I'm getting a strange vcore value coming out?

pcprobeII and everest = 1.45v but still, awesome work

[Millyons]

i got the same thing happening for the "normal" cpu temp not the dts, its a mbm thing for sure, my normal temp goes 10-15c higher than it should

[lawrywild]

? I made MBM report cpu temp 18degrees higher so it would match coretemp..

[Millyons]

the log works now, but i dont have time to test for the "inacurate high temp", but even with the newest version im still getting both sensors reading the core#1 temperature

[funkflix]

If the temps are rising a bit, it seems to work, so there must be some kind of a barrier on 20-21°C for one core?! Now on 23/27°C and it is working flawless. :)

[lawrywild]

How did you get cpu % working?

[freecableguy]

If the temps are rising a bit, it seems to work, so there must be some kind of a barrier on 20-21°C for one core?! Now on 23/27°C and it is working flawless. :)

Found the bug! thanks. I will get you a new build of the driver tonight when I can compile it and email it to you. :)

-FCG

[lawrywild]

It's gone back to reading both Core No. 2 (CPU 1) temps now

[freecableguy]

It's gone back to reading both Core No. 2 (CPU 1) temps now

So, let me make sure that I understand this. It was correctly updating the temperatures for both cores....and they were two distinct values. And then it just changed over to only displaying temps for one core on both sensors? Did you change ANYTHING? Reboot? Does it revert? Did you open another program that may be accessing the same registers? This is my most elusive "bug" although I'm not sure if I can do anything the fix this (although I really hope these is some explaination to it).

-FCG

[lawrywild]

Don't think I did anything to affect it

I tried reapplying the most recent you emailed me and same thing

[freecableguy]

Have you tried a simple reboot? I really need to track this down...

[lawrywild]

I reinstalled MBM and the patch 2 from scratch and it's working again :D

[Cooper]

So final should be pretty soon I guess :)

[lawrywild]

oh no wait a second, it's stopped working again.. :stick:

[freecableguy]

oh no wait a second, it's stopped working again.. :stick:

that's at least a clue....it tells me that the problem most likely lies in how I am accessing MBM5 shared memory for writing. I have an idea. Stand by, Larry. New DLL and SYS files coming this evening. ;)

-FCG

[lawrywild]

Cool, btw can you try making the plugin use sensors 27 and onwards or something

because the nvidia plugin uses sensors 25 and 26 :(

[freecableguy]

Cool, btw can you try making the plugin use sensors 27 and onwards or something

because the nvidia plugin uses sensors 25 and 26 :(

The highest supported number is Sensor 32. So if I want at least 8 contiguous sensors (really, 16 in case someone decides to get cute and run a quad Clovertown setup) that I would need to go, say, Sensor 9 through Sensor 24. I don't think anyone uses Sensor 9 now so that should be safe. I will include this change in the next build that I send you, Larry.

-FCG

[lawrywild]

Nice one, cheers bro

edit: or I could send you the nv plugin and you could modify it for me to use sensor 20 and 21? I got no clue how to do it.. :-p

[Millyons]

oh no wait a second, it's stopped working again.. :stick:


i will test later on a clean OS with only mbm instaled, that i used to make it work for p5b dlx, ill see if i can get two different temps since for me it always showed only core#1. ill install/reinstall with patch or without to see if i can find some pattern

[freecableguy]

i will test later on a clean OS with only mbm instaled, that i used to make it work for p5b dlx, ill see if i can get two different temps since for me it always showed only core#1. ill install/reinstall with patch or without to see if i can find some pattern

that would be great. please do. i will email you the latest build.

[lawrywild]

Same thing dude, Core 1 is being duplicated to Core 0 :(

But atleast it no longer conflicts with nv plugin :thumbsup:

http://img392.imageshack.us/img392/1100/coretempmbm5pp2.png

edit: haha woops the coretemp was showing 59/60 right before I pressed print screen, but believe me, it's reading just Core 1 haha woops :slap:

[lawrywild]

email coming your way, aslong as it doesn't get rejected by your companies webmaster thing this time.

[funkflix]

Found the bug! thanks. I will get you a new build of the driver tonight when I can compile it and email it to you. :)

-FCG

Thanks for ur email, but now it is always on 0/0°C! :(

[lawrywild]

Thanks for ur email, but now it is always on 0/0°C! :(

Change to Sensor 9 and 10 :)

[funkflix]

Change to Sensor 9 and 10 :)

Hehe, thanks mate, did not read the readme.. ;) Works "perfect" now!

Are there any configs for the other senors on P5B?

[lawrywild]

Hehe, thanks mate, did not read the readme.. ;) Works "perfect" now!

Are there any configs for the other senors on P5B?

Can you post some screenshots? :)

and have you tried:

http://www.xtremesystems.org/forums/showthread.php?t=125201

[funkflix]

Can you post some screenshots? :)

and have you tried:

http://www.xtremesystems.org/forums/showthread.php?t=125201

Thanks for the link, but how i get this update working? :confused: I installed it, but do not find anything to get it working?!

Screenshots later, when it will work! :)

[lawrywild]

to get MBM working or the coretemp plugin?

[funkflix]

The Update from ur link! I tested P4P and P4C, but both settings don't work for me. Always 9,xxV for the +12V.

[lawrywild]

hmm that's weird, it's fine here..

[freecableguy]

Hehe, thanks mate, did not read the readme.. ;) Works "perfect" now!

Are there any configs for the other senors on P5B?

Asus P5B MBM5 sensor data files are in this thread:
http://www.xtremesystems.org/forums/showthread.php?t=121183

[lawrywild]

Just tested new files, same thing, both Core 1 temp

[freecableguy]

Just tested new files, same thing, both Core 1 temp

and yet funkflix's readings are correct as well as the yonah laptop that I am running testing on....i really am having hard time figuring this out.

[lawrywild]

Still reading both Core 1 on the driver you just sent

[funkflix]

Ok, now the final screens, thanks to u all for the help etc.! :)

http://666kb.com/i/ajqajlr9yzzx3ni4f.jpg

http://666kb.com/i/ajqak069zb819wigv.jpg

:toast:

But still sometimes the "Core 1" switch back to 0°C, but it is just for less then a second.

[lawrywild]

Funkflix is that on the MBM Update 2 or the original 5.3.7.0?

[funkflix]

It is with the original 5.3.7.0 and the Update for P5B fcg linked above.

[lawrywild]

I think it must be the Update 2 causing mine to screw up then, coz it was fine last night on the original..

Funkflix can you email me the files you're using? lawrywild *AT* hotmail DOT c*m

[funkflix]

Funkflix can you email me the files you're using? lawrywild *AT* hotmail DOT c*m

Complete MBM5 folder?

@fcg

Here u can see, that both cores sometimes drop down to 0°C, hope u can fix that! If u need any support, just email me, or post here. :)

http://666kb.com/i/ajqb9g6huadt3kygv.jpg

[lawrywild]

err nah just the plugin and the driver please

[funkflix]

err nah just the plugin and the driver please

Ok, it is on the way.

[lawrywild]

Thanks, gonna sleep now, I'll try in the morning

[funkflix]

Ok, with the latest *.dll i have no drops to 0°C anymore, just at first MBM start it counts 0°C one time, so the High / Low statistic is a bit falsified, but that is ok for me. :)

[Millyons]

Ok, with the latest *.dll i have no drops to 0°C anymore, just at first MBM start it counts 0°C one time, so the High / Low statistic is a bit falsified, but that is ok for me. :)


I might have figured out why it drops to 0c........ im playing with various configs on a clean winxp install on my P5B Dlx......when i set the initial confit to P4P800 i get the 0c drop, but when i set it to P4C800-Deluxe it seems fine

[funkflix]

I might have figured out why it drops to 0c........ im playing with various configs on a clean winxp install on my P5B Dlx......when i se the initial confit to P4P800 i get the 0c drop, but when i set it to P4C800-Deluxe it seems fine

Hmm, i did not set even one of this pre configs this time?!

Anyway, i installed and configured now the plugin for my GX2 and it works perfect, but now i'm back with the 0°C problem.. 96% of the time now, it shows 0°C again for Core 1.. Really strange thing imho!

http://666kb.com/i/ajqqcfc77dn631k8t.jpg

http://666kb.com/i/ajqqcswlvrsqrpu4d.jpg

http://666kb.com/i/ajqqd1p31gtzerdml.jpg

[funkflix]

Argh! My fault, the Core 1 Plugin switched to "Should display board sensor = None".. But i'm sure i didn't changed anything.. :p:

[Millyons]

i played with this for a while and this is what i found:

- for P5B Dlx choosing the P4P800 config results in core temps dropping to 0 once in a while (to me it seemed whenever a core goes from idle to load) choosing P4C800-Deluxe resolves that, im going to post a config file but im typing this so ppl that are not using P5Bdlx are aware, and to know how to fix it on their mobos if possible

- cpu usage monitor in MBM causes both cores to show one temperature in my case it was core #1 temp for both, i dont know if you can fix that FCG, but its really usefull to have both....if it isn't possible to fix im probably gonna run cpu usage "on" with only one core showing, it really usefull when going through loggs to see what was happening and both my load temps are the same so it doesnt make to much difference, at least to me

[dinos22]

mbm's my favourite program i must say.....good to see it's got the plugin :toast: :toast:

[lawrywild]

You're right, I just switched off cpu usage and restarted MBM and Both coretemps are being reported properly again :)

edit: oh and fcg, could you please make the default name to Core 1,2,3 etc rather than CORE 1,2,3.... I hate CAPS :p:

[scaramonga]

When is this going to be available guyz? :)

[Millyons]

You're right, I just switched off cpu usage and restarted MBM and Both coretemps are being reported properly again :)

edit: oh and fcg, could you please make the default name to Core 1,2,3 etc rather than CORE 1,2,3.... I hate CAPS :p:


LOL man i was just about to ask the same, although i would like Core #0, Core #1 etc the best ;)

[lawrywild]

LOL man i was just about to ask the same, although i would like Core #0, Core #1 etc the best ;)

:p: nah, definately Core 1,2,3 etc

well, actually why not just make it so it doesn't change the name everytime it starts, so we can choose the prefix ourselves :) that's best for everyone :cool:

[webwilli]

Hmm, i did not set even one of this pre configs this time?!

Anyway, i installed and configured now the plugin for my GX2 and it works perfect, but now i'm back with the 0°C problem.. 96% of the time now, it shows 0°C again for Core 1.. Really strange thing imho!

Plugin for GX2? Where can i get it?

edit: found it... ;)

[funkflix]

edit: oh and fcg, could you please make the default name to Core 1,2,3 etc rather than CORE 1,2,3.... I hate CAPS :p:

Second that! :D

[cronic]

Great work FCG, I have used MM5 for years and love it. As soon as I get another video card I will try this out.

[freecableguy]

The discovery of the problem with the CPU usage may be a BIG help in resolving the problem with both cores showing the same temps. I will explore this.

Since everyone wants to change the labels to their own choice I will remove the auto-setting of this. Just set it yourself to whatever you want! :)

-FCG

[lawrywild]

Sweet, don't forget to send it my way mate :)

[freecableguy]

Getting real close to a final release version. One more item to track down and then it will be released with support for all Core architecture CPUs (Yonah, Merom, Conroe, Allendale, Woodcrest, Kentsfield, Clovertown).

-FCG

[lawrywild]

Have you found a workaround for the cpu usage bug yet?

[freecableguy]

Have you found a workaround for the cpu usage bug yet?

Thats what I'm working on. I'm talking with Alex (maker of MBM5) to see if there's a possible answer...

[lawrywild]

Ah, cool

[Millyons]

Thats what I'm working on. I'm talking with Alex (maker of MBM5) to see if there's a possible answer...


would it be alright if you asked him to check out the p5b dlx config.....you know im not too sure about the +5v rail ... or it would be really cool if he can make a real config for it, its fine like this it would be just cool if it came from him :) ..... although i know that probably wont happen since he quit with it :(


hehe try to get him to support it again, lets make a pettition :)

[roller11]

Free Cable Guy,
Per your instructions, I emailed you for the files, but have gotten nothing back.
Is there a delay or what?

[Shaotai]

Free Cable Guy,
Per your instructions, I emailed you for the files, but have gotten nothing back.
Is there a delay or what?

I think he got enough testers, so just hold on for the final product to be released!! :)

That's the email I got...:p:

[xgman]

Anyone running a 680i with MBM? If so what MB choosen to start from?

[funkflix]

Well, i have the Plugin working ~ 5 days now and i have not seen any bug/problem since the last update! Great work! I think if the bug with the usage is fixed u can release the final! :toast:

Anyone running a 680i with MBM? If so what MB choosen to start from?

Use Speedfan to check out which IC is reading the voltages etc. on ur board, then search for the IC and look if any older mainboard use the same IC! That is the only idea i have at the moment. :)

[lawrywild]

Well, i have the Plugin working ~ 5 days now and i have not seen any bug/problem since the last update! Great work! I think if the bug with the usage is fixed u can release the final! :toast:


Seconded :toast:

[Millyons]

Well, i have the Plugin working ~ 5 days now and i have not seen any bug/problem since the last update! Great work! I think if the bug with the usage is fixed u can release the final! :toast:


well and letting us type how we want the text to show :)

.....but ya this is awsome....here is almost 3 full days of pc being on, 1sec monitoring interval, notice the number of readouts, just casual use, switching between 2 different windows users, and hours of Oblivion and all is well :) great job FCG

[scaramonga]

Great stuff..........now when do the 'Minions' get it? :rolleyes:

[Stx]

mm nice work!

[redrol]

Here are my results. Working perfectly!:cool:

Gigabyte ds3 / Corsair Twin2X DDR2 800 / Core 2 Duo 6300 @ 3150mhz (450mhz FSB).

[freecableguy]

Alex and I have located what we believe is the bug in the current version of MBM5 and are now working on finding a way to work around it. Exactly why the problem is occuring is quite unknown which makes the solution all that more elusive. We will have something out soon though. I hope to offer the download for MBM5 Update 3 along with the plugin so that everyone can monitor their core temperatures as well as CPU usage.

-FCG

[Millyons]

awsome man, thanks for the update....hehe did u ask him if there is any way he might reinitiate mbm again

[scaramonga]

Thx for the update FCG :toast:

Good work! :)

[funkflix]

Bit Offtopic, but maybe someone can tell me, which option i must change, that MBM5 show me MHz for my GX2 clocks, not °C?

T22 Name=GPU MHz
T22 Sensor=185
T22 Tray=0
T22 Colour=clBlack
T22 Tray Colour=clBtnFace
T22 Alarm High Fixed Value=1
T22 Alarm High=0
T22 Alarm High Relative Sensor=1
T22 Alarm High Relative Value=20
T22 Alarm Low=0
T22 Alarm High Tolerance=70
T22 Alarm Low Tolerance=5
T22 Compensation=0
T22 Wave Path=
T22 Play Wave=0
T22 EXE Path=
T22 Start EXE=0
T22 Display On Dashboard=1
T22 Display Scale=80
T22 Display Type=1
T22 EXE Switch=
T22 Start SHDN=0
T22 SHDN Switch=
T22 SHDN Delay=10
T22 Use In Log=1
T22 Use In ToolTip=0
T22 Send Email=0
T22 Meter Color=clRed
T22 Meter Font Name=Arial
T22 Meter Font Size=14
T22 Meter Font Style=0

[freecableguy]

Bit Offtopic, but maybe someone can tell me, which option i must change, that MBM5 show me MHz for my GX2 clocks, not °C?

this is handled by the plugin, nothing you can change. contact the GX2 plugin developer to report the problem and ask for a possible new revision release.

[Millyons]

FCG found another bug.....when i have 2 windows accounts loged in, the other account shows 0c for both cores all other temps and voltages are fine ofcourse, although it showing 0c always does not affect the logs

[before]

Great work! I'll use it for sure. :)

[freecableguy]

bump, now available for DL

[alejo]

Here are my results. Working perfectly!:cool:

Gigabyte ds3 / Corsair Twin2X DDR2 800 / Core 2 Duo 6300 @ 3150mhz (450mhz FSB).

redrol, what settings did you use? I tried getting MBM to work with my DS3 but I had no luck getting it to read properly. Not the voltages or anything. :(

[cdelong]

where can I find a good GPU plug-in for the P5B Deluxe to display NV GPU temp and frequencies??

[redrol]

redrol, what settings did you use? I tried getting MBM to work with my DS3 but I had no luck getting it to read properly. Not the voltages or anything. :(

Hmm, I think I used Asus P4P800 for the few voltages that read correctly and basically just loaded the plugin as per FCG's instructions. Worked perfectly.

[webwilli]

thanks for the release :D

but the plugin shows not the right temperatures and not the sensor names here.
all necessary steps are done, i think. or i have make a mistake.

http://pics.mwirths.de/pics/mbm1.jpg

Asus P5W64 Pro
Intel Q6600 ES B3
Windows XP32 SP2 all updates

[funkflix]

Don't know if the bug with the CPU-usage is already fixed, but try to disable it in MBM5 and look if the plugin is working now.

Edit: Hmm, normally if the plugin works, the sensors description should change to "CORE X" etc.! Did u started the plugin? :D

[funkflix]

where can I find a good GPU plug-in for the P5B Deluxe to display NV GPU temp and frequencies??

http://www.dfi-street.com/forum/showpost.php?p=169236&postcount=397

[webwilli]

Don't know if the bug with the CPU-usage is already fixed, but try to disable it in MBM5 and look if the plugin is working now.

Edit: Hmm, normally if the plugin works, the sensors description should change to "CORE X" etc.! Did u started the plugin? :D

ok. CPU-Usage disable -> still the same...

ha ha ha :stick: yes the plugin is started. when i stop the plugin the four sensors shows 0.

[funkflix]

And the two files are in the correct folders? As is said before, imho the description of the sensors should change auto. to CORE X, if it works.

Let's wait for the autor. :)

[scaramonga]

Anyone using the Nvidia temp plug-in with a G80 card?

Just wondered if it still worked with the new breed.....:)

[funkflix]

Anyone using the Nvidia temp plug-in with a G80 card?

Just wondered if it still worked with the new breed.....:)

Just try it! ;)

If it will not work, try the older version of the plugin, because they just read out what Rivatuner reports, so maybe they will work?! But for sure only if u use Rivatuner. ;)

[HermS]

Thanks for the plugin FCG and thanks to all the testers that helped make it possible. :toast:

I see that most have 965/P5B deluxes and have sensible voltage readings, but with my P5WDG2 WS Pro this is what I see for the voltages.
http://i135.photobucket.com/albums/q148/JAFFA22/mbm5.png

Any idea what is going on there? Is it a 975x thing or is it something I've missed or done wrong? It would be nice to get VCore measurements, but not the end of the world if it isn't possible.

Thanks again,

Maff

[funkflix]

Hi,

this plugin is only for the coretemp and motherboard indepentend, u must search for special plugin for ur board, to read out the other voltages and temperatures! :)

http://www.xtremesystems.org/forums/showthread.php?t=125201

or

http://www.xtremesystems.org/forums/showthread.php?t=121183

[lawrywild]

Nice one fcg, I'll be testing this release later for sure :)

[HermS]

Hi,

this plugin is only for the coretemp and motherboard indepentend, u must search for special plugin for ur board, to read out the other voltages and temperatures! :)

http://www.xtremesystems.org/forums/showthread.php?t=125201

or

http://www.xtremesystems.org/forums/showthread.php?t=121183


Thankyou Funkflix,

That got me sorted.


:toast:

[ivo0613]

It's working for me, thanks FCG.:)

[cdelong]

http://www.dfi-street.com/forum/showpost.php?p=169236&postcount=397

Thanks! I used that when I had my DFI, but wasn't sure it would work on the P5B Deluxe for sure.

[freecableguy]

Known issues: (only one at this time)

YOU CANNOT monitor CPU Usage using the MBM5 option right now and use the core temperature plugin at the same time. You must disable this option in MBM5 and restart MBM5 in order for core temps to read correctly. I am working on the fix right now.

Sensor names are NOT set automatically anymore. You can set them yourself now. (Users said that they wanted to set them themselved to their liking.) Sensor 9 is 'CORE 0', Sensor 10 is 'CORE 1' and so on...

-FCG

[[XC] 4X4N]

Using it now, thanks! Hopefully you can get the cpu usage going, although it doesn't really matter to me. I'm always at 100% :D

[webwilli]

Known issues: (only one at this time)

YOU CANNOT monitor CPU Usage using the MBM5 option right now and use the core temperature plugin at the same time. You must disable this option in MBM5 and restart MBM5 in order for core temps to read correctly. I am working on the fix right now.

i have disable CPU Usage

Sensor names are NOT set automatically anymore. You can set them yourself now. (Users said that they wanted to set them themselved to their liking.) Sensor 9 is 'CORE 0', Sensor 10 is 'CORE 1' and so on...

-FCG

no problem, but the temperature do not match. any idea?

[tiger64]

the link doesnt work.
wats going on ???

[scaramonga]

Working fine........although a touch erratic compared to 'Core Temp'.......but OK.

GPU temp plug-in working great with G80 also :D

Any ideas as to why the voltage sensors and system temp ain't working on mine? or do they not work on my board with MBM5?

[freecableguy]

the link doesnt work.
wats going on ???

our site hosting is being a little flakey today, we are working on moving over to a new server

[Supertim0r]

mbm5 reset vcore on XBX2 = crash

[lawrywild]

New 1.1 version seems to be working very well Kris, here's a screenshot:

http://img244.imageshack.us/img244/2273/mbmzk7.png

So somehow you made the plugin override the cpu usage thing (disabled in mbm) and handle it itself?

[Millyons]

i found the cpu usage bug, and didnt get 1.1 yet :(

well i have another problem, involving 2 windows users, like this

"User A" logged on with mbm running (turned on by start with windows option), when i log on "User B" i get this - see atachment, then the plug in is showing 0c and i cant start or stop it.....this is when mbm starts with windows, although when i try turn it on manualy after in "User B" account it does the same thing

but when both users are already logged on and then I manualy start mbm, its fine on both


both users have same permission level

[scaramonga]

I'll ask again........:rolleyes:

Any ideas as to why the voltage sensors and system temp ain't working on mine? or do they not work on my board with MBM5?

[Millyons]

I'll ask again........:rolleyes:

Any ideas as to why the voltage sensors and system temp ain't working on mine? or do they not work on my board with MBM5?


mabey you should use search :rolleyes:

http://www.xtremesystems.org/forums/showthread.php?t=125201


this thread is about the c2 dts plug in not mobo mbm support thread

[funkflix]

I posted the link to the plugin for ur board before, why not ask there? ;)

[scaramonga]

Well strike me down and beat me with a pole guyz........:rolleyes:

I asked.....never searched.....but I got :D

Many thx :toast:

[freecableguy]

i found the cpu usage bug, and didnt get 1.1 yet :(

well i have another problem, involving 2 windows users, like this

"User A" logged on with mbm running (turned on by start with windows option), when i log on "User B" i get this - see atachment, then the plug in is showing 0c and i cant start or stop it.....this is when mbm starts with windows, although when i try turn it on manualy after in "User B" account it does the same thing

but when both users are already logged on and then I manualy start mbm, its fine on both


both users have same permission level

Thank you for indentifying this problem. I believe I already know the source. I will work on a fix for this to be included in the next release (1.2?). I'm working with Alex, maker of MBM5, right now. Looks like we are going to put out an Update 3 to MBM5 to be hosted from The Tech Repository.

-FCG

[Millyons]

currently im just gonna set to user startup instead of system as a work-around....but it would be nice for it to get fixed......ps: will you send me 1.1 ? ;)

[Millyons]

i dont wanna clog the post with simular screens but, all is well with 1.1 and cpu usage.

[freecableguy]

i dont wanna clog the post with simular screens but, all is well with 1.1 and cpu usage.

Correct spelling of "exhaust" ;)

[Millyons]

lol thanks i never even noticed that :)

[cdelong]

Off topic here.....

If I install the Asus plug in for MBM-5 settings I need to replace the Data folder in MBM.

Now.... if I want to display clocks and temp offf my GPU I have to replace the Data folder as well. Is this possible to do?? How??

TIA.

[qdemn7]

FCG noticed a bug with my system (see sig), the CPU speed does not update. I'm NOT using the CPU usage, but when changing OC settings inside windows, using the Gigabyte utlity, the CPU speed doesn't change.

[freecableguy]

FCG noticed a bug with my system (see sig), the CPU speed does not update. I'm NOT using the CPU usage, but when changing OC settings inside windows, using the Gigabyte utlity, the CPU speed doesn't change.

My plugin provides core temperatures only. All other functions are provided by MBM5 directly. Starting with version 1.1 (to be released soon) allows for simultaneous core temperature monitoring and CPU usage displays.

-FCG

[qdemn7]

My plugin provides core temperatures only. All other functions are provided by MBM5 directly. Starting with version 1.1 (to be released soon) allows for simultaneous core temperature monitoring and CPU usage displays.

-FCGOK, thanks.

[Millyons]

FCG noticed a bug with my system (see sig), the CPU speed does not update. I'm NOT using the CPU usage, but when changing OC settings inside windows, using the Gigabyte utlity, the CPU speed doesn't change.

mbm actualy aways was flakey with showing cpu speed, but this time its not to blame, if you noticed most programs don't show when u change cpu speed in windows, core temp, orthos, etc...

[Mango31]

P5WDG2 WS Pro, E6600 - CPU load and core temp for both cores read out perfect on my Matrix Orbital MX412. Thanks a ton ! :toast:


edit: simultaneous

[cdelong]

where can we get the version 1.1?? I've tried twice with v1.0 and just get some pop-up box saying something about DTS. Someone else posted a pic of the warning message a few posts back.

What am I doing wrong??

[scaramonga]

Is 'Winbond 1' the correct sensor for the system temperature? :)

[Ten]

Thx for this prog, i'm gona try it asap:)

[cdelong]

Can't get it working:mad:

I'm getting a strange pop-up screen when starting MBM after installing the plug in as in your post (v1.0). It says something like DNS core temp error???

There is no plug in option for core temps shown when I right click MBM in the tray.

I've completly removed the latest version of MBM5 now and tried again.... same error?? Core temps 9 & 10 are 0C when set to custom and I have disabled CPU usage??

Any ideas?

[cdelong]

mbm actualy aways was flakey with showing cpu speed, but this time its not to blame, if you noticed most programs don't show when u change cpu speed in windows, core temp, orthos, etc...

right click in the tray and click update CPU.. it generaaly will change the CPU speed. GPU and clocks will not update if you have that plug in installed.

[freecableguy]

Can't get it working:mad:

I'm getting a strange pop-up screen when starting MBM after installing the plug in as in your post (v1.0). It says something like DNS core temp error???

There is no plug in option for core temps shown when I right click MBM in the tray.

I've completly removed the latest version of MBM5 now and tried again.... same error?? Core temps 9 & 10 are 0C when set to custom and I have disabled CPU usage??

Any ideas?

please check your PMs. you seem to be experiencing an as of yet unfound problem. thank you.

-FCG

[Millyons]

Can't get it working:mad:

I'm getting a strange pop-up screen when starting MBM after installing the plug in as in your post (v1.0). It says something like DNS core temp error???

There is no plug in option for core temps shown when I right click MBM in the tray.

I've completly removed the latest version of MBM5 now and tried again.... same error?? Core temps 9 & 10 are 0C when set to custom and I have disabled CPU usage??

Any ideas?


is the error like in this post?

http://www.xtremesystems.org/forums/showpost.php?p=1885982&postcount=150

[scaramonga]

Is 'Winbond 1' the correct sensor for the system temperature?

[cronic]

Wonderful work FCG,and all those involved with making this happen. Thank you for giving the best monitoring software of all time a new lease on life.

[cdelong]

is the error like in this post?

http://www.xtremesystems.org/forums/showpost.php?p=1885982&postcount=150

Yes... that's the one.

I'm the only installed user on my rig though. Fresh OS install, MBM5 5370 and that message:mad:

[cdelong]

Rig is in my sig. Fresh OS install. MBM 5370 installed with no other plug in's. I'd like to install the ASUS P5B Deluxe fix to display my voltages properly though?? I installled the NV GPU plug in after the core temp deal failed and that worked just fine..... GPU core was 450 as it should have been, GPU memory showed 660mhz opposed to the 1320 that is it.... I figure thats x2 cause its DDR memory.

I just can't get the core temp plug-in to work!

MBM is now uninstalled via add/remove programs... I deleted the MBM5 folder from program files and coretemp from windows/system32/driver folder.

I'm ready to start from scratch one more time.... then I call it quits. What should I install first after MBM5.... P5B Deluxe fix, GPU stuff or your core temps- if all can be done.

[cronic]

ok here is what I did.
mm5 3.7.0 (original mm5)
mm5 3.7.0_3 (mm5 update 3)
coretemp 1.1
p5b data file
(I don't have a nvidia card so you are on your own with that)

follow the steps for each of the above packages and you should be golden.

[cdelong]

ok here is what I did.
mm5 3.7.0 (original mm5)
mm5 3.7.0_3 (mm5 update 3)
coretemp 1.1
p5b data file
(I don't have a nvidia card so you are on your own with that)

follow the steps for each of the above packages and you should be golden.

Where's the coretemp v1.1?? All I see is v1.0 on the first page of this thread.

I assume update 3 is on the MBM 5 site??

[cronic]

Where's the coretemp v1.1?? All I see is v1.0 on the first page of this thread.

I assume update 3 is on the MBM 5 site??


The same place you gEt mm5 update 3
courtesy FCG:
http://www.thetechrepository.com/showthread.php?t=74

All of this is covered in the first poSt by FCG.

[cdelong]

still don't work?? after doing all the enabling on the settings page... nothing shows up under plug ins when I right click in the tray... there's an arrow, but no core temp plug in slides over to enable it.

[scaramonga]

Version 1.1 don't work for me.......version 1.0 was OK.....

Temps show after starting plug-in....but reset to '0' 2 seconds later???

Also......can someone PLEASE tell me what the 'system' sensor is??......is it Winbond 1???

[freecableguy]

Version 1.1 don't work for me.......version 1.0 was OK.....

Temps show after starting plug-in....but reset to '0' 2 seconds later???

Also......can someone PLEASE tell me what the 'system' sensor is??......is it Winbond 1???

Did you change the defaults sensors and set the read type to "Custom"?

[scaramonga]

Did you change the defaults sensors and set the read type to "Custom"?

Yup.......both on 24 & 23 sensors and set as custom.

Starts OK....then just sets to zero within 2 secs??....and for some reason its labeled them GPU2 ambient & GPU2 core??

http://img.photobucket.com/albums/v60/scaramonga/mbm.png

I also need to know what sensor is for 'system' :rolleyes:

[scaramonga]

I think we have a conflict.......

The Nvidia plug-in is using sensors as below......

[SensorNumbers]
sensorsGpu1TempsAmb=26
sensorsGpu1TempsCore=25
sensorsGpu2TempsAmb=24
sensorsGpu2TempsCore=23
sensorsGpuClocksCore=22
sensorsGpuClocksMem=21

**EDIT**

Yup......stopping the Nvidia plug-in results in the cores working fine!.......so its a conflict between sensors.

[freecableguy]

I think we have a conflict.......

The Nvidia plug-in is using sensors as below......

[SensorNumbers]
sensorsGpu1TempsAmb=26
sensorsGpu1TempsCore=25
sensorsGpu2TempsAmb=24
sensorsGpu2TempsCore=23
sensorsGpuClocksCore=22
sensorsGpuClocksMem=21

**EDIT**

Yup......stopping the Nvidia plug-in results in the cores working fine!.......so its a conflict between sensors.


Looks like those are user configurable....set them to anything outside of the 24 & 23 range (and anything else being used) so that the Core Temp plugin can use 24 and 23.

[HermS]

All working perfectly here, great to be back on MBM5!

Once again thanks to all for the hard work here.

[scaramonga]

Looks like those are user configurable....set them to anything outside of the 24 & 23 range (and anything else being used) so that the Core Temp plugin can use 24 and 23.

Nope!

Entered various values and it makes no difference......it still defaults to the above.....must be written in the DLL itself?

[bichi]

P5WDH - BIOS: 1705

- Both MBM Update 3 and Core Plugin v1.1 installed
- four instances of "HEAT" loaded (quick 3min test)
- close agreement with CoreTemp v0.94 (most likely a sampling lag, than accuracy problem)

Thanks FreeCableGuy and Alex van Kaam!

[bichi]

PM from FreeCableGuy:
"....looks good. would you be willing to take another screen shot with the about box for the plugin open on the screen so that i can verify that it is reading everything for your quad core correctly?..."

Here ya go, FreeCableGuy
- same conditions as previous post

P5WDH - BIOS: 1705
- Both MBM Update 3 and Core Plugin v1.1 installed
- four instances of "HEAT" loaded (quick 3min test)
- close agreement with CoreTemp v0.94 (most likely a sampling lag, than accuracy problem)

Thanks FreeCableGuy and Alex van Kaam!

[scaramonga]

Any reason as to why the plugin sensors were changed?

Just means we can only use one or the other now because of conflict :(

Nvidia plugin = no core values?

or

Core plugin = no GPU values?

[freecableguy]

Any reason as to why the plugin sensors were changed?

Just means we can only use one or the other now because of conflict :(

Nvidia plugin = no core values?

or

Core plugin = no GPU values?

i will re-evaluate. looks like there is a good chance I will make a change back to the convention used in v1.0 for the new v1.11

[dinos22]

my volts don't work on 680i evga board :confused: actually the only thing i got going was CPU temps lol...CPU speed was there and CPU load

[bichi]

Motherboard Monitor Update 3 and CoreTemp Plugin v1.1 in action
- P5WDH - BIOS: 1705 - QX6700 Quad - TMPG XPress v4.2.3.193
- simple MPEG 10min render test

Link to pic: http://www.esnips.com/doc/ef07e520-258b-4e7c-90ea-65fcef67a4b0

[scaramonga]

i will re-evaluate. looks like there is a good chance I will make a change back to the convention used in v1.0 for the new v1.11

That would be awesome buddy! :)

The previous sensors worked just fine anyway.....I just wondered if there was any specific reason for moving them.......but good stuff! :D :toast:

[Undersea]

All I have to say is thankyou Freecableguy. At the pcper chaintech forum we have used the program for a long time.

A few of us moved over to the DS3 which is a nice board but MBM5 was a no go! You've changed that and we appreciate it!

One thing still isn't working for us, 12v reading? Anyway of getting this fixed or a know setting?

Again thank you! :)

[Millyons]

i got the second user problem again, dont know how it worked fine for days...not sure but i guess i never checked it out after instaling update 3 and the newest plugin, might be cause of that.....only other thing i instaled is the msn live from normal msn witch dont got nothing to to with monitoring/drivers etc

[cjordan61]

Anyone have mbm5 ini. settings for the aw9d-max board so I can monitor voltage/fans etc. along with the core temps.

[Millyons]

you wont get it to work since it uses uGuru....i had abits al8 for a while searched and searched and i dont think it exists

[cdelong]

I finally got this bad boy workin'!! I was having problems till I activated XP?? Wonder why?? anyways I activated it yesterday and tried again today.... perfect!

The only thing I need to do is figure out why my GPU memory is only showing 1/2 of what it really is??

http://home.rochester.rr.com/artisticsolution/Core%20Temp.JPG

[funkflix]

The clock of ur memory is the "real" clock.

Or does CPU-Z show u 874MHz instead of 437MHz? ;)

[cdelong]

The clock of ur memory is the "real" clock.

Or does CPU-Z show u 874MHz instead of 437MHz? ;)

I'm talking about GPU memory (as in video card).... not system memory.

[DTU_XaVier]

Just tried it... works perfectly fine (the temp monitoring at least), although it doesn't update the temps as often as Core Temp does... Any way to change that??
[EDIT] Never mind :)

Best Regards :toast:

[cdelong]

Just tried it... works perfectly fine (the temp monitoring at least), although it doesn't update the temps as often as Core Temp does... Any way to change that??
[EDIT] Never mind :)

Best Regards :toast:

I've noticed MBM has a little more delay than Core Temp or even ASUS PC Probe. Make sure your monitoring interval is set as low as possible in MBM- mine is 1 second, but it still lags a little. I think you can change that setting under the General tab on the Setting display.

[enz660]

nice so this program actually shows accurate temps for core 2 duo like TAT? Ill try it out when I get home. Sitting in the PC lab waiting for my next exam (actually, its not even an exam, but I still have to wait over 3 hours for a class that will last several minutes :( )

[Dani]

Sorry that I dont have time to read whole thread trough :(
..but can someone tell me why MBM5 doesn't work with my P5B Dlx, E6600 and WinXP + SP2?

Everything is installed ok, but when I double click MBM5 icon to start it will popup something like this:

http://koti.mbnet.fi/dani69/Muut/MBM5_error.gif

[before]

Works fine for me under Watercooling. BTW I've noticed wrong temp reporting under 2-stager.

http://img408.imageshack.us/img408/2484/e6600spi32m13m11719szf0.png

[before]

As can be seen, the plugin doesn't show the temparature while running very cold conditions.

Is it fixable?

http://img181.imageshack.us/img181/9427/e6600spi1m10313ay7.png

[dz`]

Does this work for reading AMD64 DTS? If not is it possible to include support for this? We can never have enough monitoring progs ;)

[Greg_1]

I'm getting crazy, I do everything as it says in the first post but when I start MBM I get sth like:
"Detected processor does not support on-die Digital Thermal Sensor (DTS) readings.
Core(TM) Temperature Monitor Plugin failed to initialize"

Anyone has an idea ?
my mb is GB 965P-(D)S3

EDIT: I've installed MBM like 3 or 4 times and still no difference :/

[Millyons]

Same thing happens on my machine sometimes when my wife logs in to her user.....are you the only user loged in at that time when u get that msg?

[775911]

Is there a mbm plugin for p5n-e anyone know?

[Millyons]

there are no mobo specifis plug ins.....the plugin is for all c2d cpus and works on all mobos.....for mobo support instal mbm and choose diferend asus mobos from the configuration list to see what config gives you most information, although you will probably need to edit the config after that

[timber715]

would there be support for gigabyte GA-965P-DS4 motherboard??? a patch perhaps and where to aquire it??
thanks

[775911]

Ok I'll give it another look. I thought the original guy had ceased development so it wasnt that easy for anything conroe related. I realise this plugin works off the cpu itself though :)

[Millyons]

with all the new boards you just have to try it.....yes development was ceased couple years ago but the mobos still mostly use same monitoring chips and that is whats most important, check what chip is it (winbond, itc, etc) and try to find the same one in the mobo config page...or in the .inis .... i might just write a small guide on how to get it working....

[Clint]

This is driving me friggin nuts here!!''

I installed all per instructions and got readings from CPU, GPU and MB fine and dandy in my HP nx9420 lappy..(2c off on CPU but ok).

After i opted for IDE and SCSI hd readings in MB I rebooted and all sensor choices simply dissapeared in the drop down list...nothing there except the hd sensor that now have been included.

Now, I have tried EVERYTHING to get those readings back!!

I have uninstalled the MBM and plugin a few times, cleaned registry, flashed bios, and searched high and low for resident files from the MBM and plugin installs.....still no sensors even showing up!!

I have started and stopped the plugin a zillion times, still nothing...

I do have readings in Everest Ultimate...so sensors are still kicking.

Where in *""#¤¤%#¤%#& are those settings/conf-files that I can't find!!!
It must be related to the invokment of those IDE and SCSI hd sensor readings I opted for..

Please, anyone!!:mad:

EDIT:
After reinstalling XP I still cannot get the sensors to show up in the scroll-list.

The sensors are still working in all other apps like speedfan and Everest....how is this possible...I'm baffled!! :confused:

FCG ..where art thou??

EDIT2:
I have now installed Vista as well, and I still cannot get the sensors to show up in the drop-down list...but ALL other monitor software works..:rolleyes:

Now, this is really torturing me...how in heavens can MBM/coretemp do something to my hardware that makes the sensors to dissapear ONLY for MBM/coretemp..!?!?

[JamesBong420]

any way to do this with amd x2s? i would love to have cores in mbm ... :rolleyes:

[Xvys]

What is this some kind of joke? The installation of this "update" is so retarded, it must be intentional. There is no reason to manually insert all these bizarre files all over the computer. But the last laugh is on the fools who perpetrated this joke, I erased all that junk and will never use MBM again. It was always lousy program and still is. There are many, many other programs which are far superior and are designed by professionals.

This is an obvious hoax and the Forum Moderators should lock or delete this topic immediately. They shouldn't be allowed to promote their trash on these forums.

[funkflix]

What is this some kind of joke? The installation of this "update" is so retarded, it must be intentional. There is no reason to manually insert all these bizarre files all over the computer. But the last laugh is on the fools who perpetrated this joke, I erased all that junk and will never use MBM again. It was always lousy program and still is. There are many, many other programs which are far superior and are designed by professionals.

This is an obvious hoax and the Forum Moderators should lock or delete this topic immediately. They shouldn't be allowed to promote their trash on these forums.

:ROTF: :ROTF: :ROTF:

[Millyons]

What is this some kind of joke? The installation of this "update" is so retarded, it must be intentional. There is no reason to manually insert all these bizarre files all over the computer. But the last laugh is on the fools who perpetrated this joke, I erased all that junk and will never use MBM again. It was always lousy program and still is. There are many, many other programs which are far superior and are designed by professionals.

This is an obvious hoax and the Forum Moderators should lock or delete this topic immediately. They shouldn't be allowed to promote their trash on these forums.


LMAO oh man thats too funny, if you dont know how to use a program and you dont know what you are talking about, then you should ask for help not post crap like that

[grunion]

Hi Folks,

I wanted to give a big thanks for the work you all have done:clap:
MBM5 has always been my favorite.
I have it working fine with my E6700 and my Asrock board, only Vcore is off.
Quick question, Is there any word on the 680i compatability?

Once again thanks for all the work:clap:

http://i82.photobucket.com/albums/j250/onion721/MBM5.png

[bichi]

MBM Update 3 + CoreTemp Plugin v1.13
- P5WDH, QX6700 @ 3.0G, BIOS 2004
- Vegas 7.0d Transcode

Working well! - Thanks FreeCableGuy and Alex van Kaam!

[ripken204]

anyone get this to work in vista x64? for me it keeps saying that "the driver didnt load" every time i try to run the program..

[Brother Esau]

Cool...Very cool indeed, to bad I have UGuru Now

[LUCI5R]

Howdy Guys,

I've been looking for system monitoring to put on my desktop and I think I'm going to give this a shot.

Here's my specs:
ASUS P5W-DH Deluxe Motherboard
Intel Core 2 Duo E6320 CPU
ASUS ATI Radeon X1950PRO GPU
Windows Vista Ultimate

I know that this motherboard is supported because I've seen screenshots from people using this motherboard. I'm sure the CPU is supported as well. I'll try to give the Installation & Configuration a shot.

I was looking at other people's screens and this is what I'm hoping to achieve (This is someone else's of course) :
http://www.rahulsjohari.com/ebay/mbm.jpg

But I would like to also add some GPU values - like temperature, fan etc. Is that possible? Can I add anything of my Radeon X1950PRO to this?

Thanks.

[ripken204]

ya its possible, i did all the on my opteron with xp, i dont think the program likes vista x64 tho :(

[LUCI5R]

ya its possible, i did all the on my opteron with xp, i dont think the program likes vista x64 tho :(

I've got the 32-bit Vista. I don't think that should be a problem, right?
Hey - Do you know what if I need to install some other plugin or application in order for mbm to read the GPU values? Or will it do it by default?

Thanks!

[ripken204]

okay i finally got mbm5 working in vista (stupid update forces integriy checks to be enabled!)

but i cant get the temp plugin to work, it just give me an error saying file not found or priveleges insufficient

[LUCI5R]

Ok, ATITools is able to post GPU values to MBM5 - but I don't use that, instead I use ATI Tray Tools. Does anyone know if ATI Tray Tools will be able to post GPU Values to MBM5?

[LUCI5R]

Alright I got MBM5 + Update 3 + CoreTemp Plugin Installed. MBM5 starts up and CoreTemp Plugin doesn't give me any errors either - it started without any problems.

But none of the Sensors are reporting anything!!!! How do I specify ASUS P5W DH Deluxe as my Motherboard?? It didn't show this in the list!

[ACE76]

motherboard independent. just requires a CPU based on Intel Core technology (Yonah, Merom, Conroe, Allendale, Woodcrest, Kentsfield, Clovertown, etc)

-FCG

Yeah but ill it properly display G0 stepping CPU temps?...seems no other software is doing it properly as of now.
:(

[ripken204]

Yeah but ill it properly display G0 stepping CPU temps?...seems no other software is doing it properly as of now.
:(

not true. mbm5 read mine correctly, i have the P5K and i chose a P5 something i think and it worked. coretemp also works.

[`danny]

Wish there was a way around this stupid driver signing, i would really like to have this program work with my c2d :(

[ripken204]

there is, googe for disable integrity checks
but there was a recent MS update that disabled them and if you installed that update already then you can just uninstall it

btw, floyd ftw! i was just blasting a dvd of them live in berlin, that is a sick concert. i also saw roger about a month ago in concert :rocker:

[LUCI5R]

Ok, I was able to get MBM5 to recognize my P5W DH Deluxe - and both MBM5 and the CoreTemp Plugin are working fine.

How do you guys know what sensor is what?
Temperatures & Fans seem to have started off - but none of the Voltages are being reported. And the CPU Fan is also not being reported.

Any clues?