New Infinity bios rocks !- 455fsb on orthos blend

[raju]

http://img175.imageshack.us/img175/8275/i41ghzfk5.th.jpg (http://img175.imageshack.us/my.php?image=i41ghzfk5.jpg)

455fsb boot up out of bios..

quite surprising for such a cheap board, a quick pencil mod to 1.85vnb and on phase it runs Orthos quite happily...

I'm gonna see how long it can hold this up

regards
Raja

[pH(x)]

What are the load temps at that voltage?


Damn nice clock btw :toast:

[raju]

it's on phase buddy, no real way to check...


please note this is a retail board, no special review sample, only change is a pencil mod to the vnb to 1.85 volts...

Thermatake extreme spirit II nb cooler and 90mm fan at full blast nb temps are around 39 degrees on full load..

regards
Raja

[Kunaak]

it's on phase buddy, no real way to check...

regards
Raja

Use Systool.
that works for reading directly from the bios when below zero.

[Vassili]

Which bios is that exact?

Nice score. :)

[raju]

HI Kunaak,

board is not listed in the settings menu, do you know what monitor setting I can use??

I have some new insulation retention coming next week from Johann/jinu as the current polyfan has become recessed, so the evap contact with the cpu is not good. Let me know the monitor setting in systool for the infinity and I shall report back with running orthos test and temps in this thread at the above speeds and voltage..

regards
Raja

[raju]

Which bios is that exact?

Nice score. :)


thx

97TIDC15

[ea6gka]

what memory dude?

[raju]

team group 667mhz 3-3-3-8 2gb kit..(micron d9)

[raju]

4 hours in at 455fsb...

http://img85.imageshack.us/img85/2219/i41ghzgp7.th.jpg (http://img85.imageshack.us/my.php?image=i41ghzgp7.jpg)

[ivo0613]

what is the revision of your board?
Thx!

[dinos22]

what was your previous highest benchable FSB

[raju]

hi

board revision is A (bottom right corner of mobo)..

Brought from a retailer in the UK, no cherry pick, or review samples, I don't use them. I tried once and the company in question asked for the boards back because I did not spin the super pi ability and said the orthos was a little lower than expected. Reviewing for some companies is basically advertising. I even paid for this Conroe ES I have, all memory and psu too. No review samples I'm afraid, I don't agree with having special smaples that consumers can't touch. The E6600 is the only exception in my rig, being an ES, but some retails weeks have proven to be just as good if not better.

You can check dfi-street for my threads there containing my previous maximums, so it's the bios that's the confirmed champ here.

Only reason I post this stuff is so that some guys here who don't bench too much but still like real stable oc's can know what board provides a real good if not best peformance at the price on the 975 chipset.

Previous max on all other bios was about 385fsb (yes even on phase, on all older bios'x) with my first board, that board maxxed out at around, 450 for bootup (on this bios). Orthos at around 440 with read delay at 6. Never tried at 7 on that board.

This board read delay 6 max out at 445 and read delay 7 is hitting 455fsb as
you can see, Orthos blend stable too..

Only change over retail is the pencil modded vnb to 1.85..

Sorry for the long post, just wanted to clear up that's there's nothing special or cherry picked in my rig.

regards
Raja

[MrDeeds]

Many dumped this board months ago. Now it seems like a great deal for the price.

[dinos22]

how does performance change

could this be because 1333 was finally implemented or?

it's certainly a big jump

reminds me of bios upgrades for Asus P5B Deluxe and 400>500MHz FSB jumps :)

[raju]

I think it's still 1066 strap... They managed the 1066 strap on the Asus Pro too at about 445, so it's certainly do-able...


let me get this orthos run out of the way, and I'll run some super pi to check...


regards
Raja

[toddm27]

now you've got me tempted to pick one of these back up, I was about to jump on the 680i bandwagon, I'm needing a sli board for phase though, so I'm still weary of getting another 975 board and being disappointed. lmk if it goes any higher with diff dividers, or if 455 is the max

[erwinz]

raju.. :woot: for you..

nice works.. :D

[raju]

i'll try by all means...

Have not seen any orthos blend tests over the 450 mark on the 9 x multi on the 680i yet, people don't generally have the cooling to try it, I have seen 500x7 or so, but I recon it's not as hard on the nb as the higher multi's at the same fsb:- I'm not yet convinced that 450X8 means that 450X9 will run. I will have an Asus Striker soon, so will find out for sure...

If I can push this out further I'll let you know..


regards
Raja

[toddm27]

i'll try by all means...

Have not seen any orthos blend tests over the 450 mark on the 9 x multi on the 680i yet, people don't generally have the cooling to try it, I have seen 500x7 or so, but I recon it's not as hard on the nb as the higher multi's at the same fsb:- I'm not yet convinced that 450X8 means that 450X9 will run. I will have an Asus Striker soon, so will find out for sure...

If I can push this out further I'll let you know..


regards
Raja
you're killing me, I can't find one anywhere, if I could I'd forget about any other boards, lol:D

[Dumo]

Finally:toast:

[raju]

http://img292.imageshack.us/img292/4893/i41ghzxw0.jpg


Well I'm impressed, at the price this board is king, real stable fsb..

I hope the Asus striker can beat this, otherwise i'll be feeling bad for the cash waste..

regards
Raja

[Blue078]

you're killing me, I can't find one anywhere, if I could I'd forget about any other boards, lol:D

Shows to be instock.
http://www.newegg.com/Product/Product.asp?Item=N82E16813136168

[toddm27]

Shows to be instock.
http://www.newegg.com/Product/Product.asp?Item=N82E16813136168
I was talking about the striker extreme, but thanks:D

[Blue078]

:p: oops

[Knight]

Great work, but I wonder what it will do without the mod?

[raju]

I can reduce to 1.75vnb later this week and test if you like...

bottom line;- air/water cooling ain't running out of fsb for an e6600, 24/7 use...

on phase the extra fsb is useful...

regards
raja

[toddm27]

fyi, newegg's got these for a steal
http://www.newegg.com/Product/Product.asp?Item=N82E16813136168R
122 shipped:bounces:
looks like 680i's gonna wait for me;)

[GrimReaper]

fyi, newegg's got these for a steal
http://www.newegg.com/Product/Product.asp?Item=N82E16813136168R
122 shipped:bounces:
looks like 680i's gonna wait for me;)

only 1 left so you better hurry :p:

[toddm27]

now i'm havin 2nd thoughts, there seems to be a new rev which fixed some issues, what do you think the chance of getting a new rev are with a new one?

[GrimReaper]

probably you might get it ;) I really duno what the new version fixes but if its something really big then i guess better wait for it :toast:

[irev210]

I've been playing with the new BIOS as well.

Even with quadcore it does well compared to other boards.

With quad core kentfield I was able to be stable up to 375mhz fsb. This is up from 345 on old bios with kentfield.

Memory performance is also improved. DDR 1100 @ 4-4-4-12 w/ decent D9GMH is now reachable for me.

My board is one of the first, so rev A.

It is just amazing how far this board has come.

[Ten]

I just orderd this card, i will sell my aw9d-max because i don't like the n-b cooling on abit but will miss uguru, much better n-b cooling on DFI easyer to take off, just waiting for RD600 to be released:)

[dinos22]

let us know how performance was affected and whether this is the result from looser latencies or something else

[irev210]

i heard that the rev B board was awesome. I will do a direct compare to the xbx2 and summarize the results. I am not sure how much time I have to play with this stuff, but we shall see.

I am excited to see the memory performance is there. It is = to the evga 680i that I was playing with.

[Rol-Co]

I've been playing with the new BIOS as well.

Even with quadcore it does well compared to other boards.

With quad core kentfield I was able to be stable up to 375mhz fsb. This is up from 345 on old bios with kentfield.

Memory performance is also improved. DDR 1100 @ 4-4-4-12 w/ decent D9GMH is now reachable for me.

My board is one of the first, so rev A.

It is just amazing how far this board has come.

any option to change in multiplier at the bios?
.

[irev210]

any option to change in multiplier at the bios?
.


YUP! FINALLY!!
For dual core and quad core!

[highoctane]

Are you sure about being able to adjust the multiplier with all core2 cpus becuase even with the latest bios I have not seen actual multiplier adjustment.

Maybe I've missed it but I looked for it and it looks like the option may only be available for the xtreme cores.

[raju]

only default multi I'm afraid, which is no bid deal really, e6600 does best on 9x...

superpim1m, I'd say this is 1066 strap...

http://img95.imageshack.us/img95/7677/41ghz1msupion6.jpg

[erwinz]

wow nice scores.. :D

really missing my board.. ;)

[dinos22]

looks ok try a 32M time too :D

[BlaqMale]

any issues with the board future users might want to know about?

[Ten]

And were can i get 11.03 bios or 11.13 bios?:)

[irev210]

only default multi I'm afraid, which is no bid deal really, e6600 does best on 9x...



did you go under CPU adjustments then select Multi UNLOCK (then of the right it will say something about smithfield XE.

When I selected that, I had unlocked multi's in genie bios.

[shimmishim]

wow! thanks for the heads up raja.

i will look into this board. still waiting for abit to release a bios like this for the aw9d-max.

[shimmishim]

one more thing...

so there is no multiplier adjustment with any bios?

so if i have a 6700, i'm stuck at 10x?

[boshuter]

one more thing...

so there is no multiplier adjustment with any bios?

so if i have a 6700, i'm stuck at 10x?

I'm hoping for multi adjustment with this new bios, my 6700 is an ES, but none of the older bios have any adjustment...... will lyk later today ;)

[Ten]

did you go under CPU adjustments then select Multi UNLOCK (then of the right it will say something about smithfield XE.

When I selected that, I had unlocked multi's in genie bios.

have you tested this in the bios? i waiting for my DFI board i hope there is a option to unlock multipel.

[highoctane]

I currently have mine running with a retail e6700 and I don't have a multiplier adjustment with the latest bios, I believe the feature is unlocked with xtreme processors though.

[Ten]

Ok ihope this will be fixed with next bios upgrade then.

[Harshal]

As always Thanks RAJU!! Good Stuff
Congrats on dat old Green Rocket there :)

[raju]

32m spi

http://img292.imageshack.us/img292/5031/32m4100kt2.jpg

slightly enhanced settings for super pi, as it's easy on the board, read delay of 6 at 455 fsb and tighter tras and more aggressive refresh mode select..

regards
Raja

[sierra_bound]

Nice results.

You will get much better Pi results if you run 4:5 or 2:3. Memory speed is generally more important in Pi than FSB.

http://img133.imageshack.us/my.php?image=32m4110cc1.jpg

Also, most people here run Orthos at Priority to 9 instead of 1. You can also try 10, but that may cause a freeze-up.

[raju]

Thx Sierra,

It's tricky getting some ram stable for 24/7 use over 1050mhz (I tend to stick to stuff that normal users can repeat easily without over pushing anything for 24/7), I genrally stick near Orthos results and don't go over too much. I leave the superpi tweaking to the masters;)...

I can run priority 9 when I'm not using my pc, but when using the pc, it slows down everything too much...

I will leave it on 9 tonight if you like..

regards
Raja

[sierra_bound]

I'm sure your rig is stable.:) Priority 9 is generally more stressful than 1.

Looks like the bios has made a really big difference.

[shawn1998]

Question to you guys. Would I have any issues running the Corsair Dominator memory at 1066 with this board? I was thinking of getting it and playing with it while I RMA my 680i (floppy controller is borked up).

Thanks.

Shawn

[Tony]

Raju

You need to try 64us refresh rate when in 1:1, if you need the bios let me know ASAP as I leave tomorrow.

T

[toddm27]

is the bios posted on dfi-street or is there a link here to download the bios? lmk I've got one showing up tomorrow for some fun :D

[boshuter]

one more thing...

so there is no multiplier adjustment with any bios?

so if i have a 6700, i'm stuck at 10x?

No multiplier adjustment, not even with my ES.

I did get this to boot at 430fsb X 10 though, up from 380fsb with any other bios. I'll do the vmods tomorrow and see how high it will go with the E6700es; I only got to play with it a little this evening on my homade single stage phase unit, so far I could boot at 430fsb and clockgen to 4.45ghz @ 1.53vcore. This board is really looking up :)

[raju]

http://img292.imageshack.us/img292/7029/prio9orthosyl9.jpg


this was taken live with orthos running at priority 9, dunno why but the memory cpu-z screen has come out borked actual cas is 4, trc is 16 and tras is 12, 1:1 so 910 mhz or so...

Obviously due to the heavy load, cpu-z did not open or register properly...

I have to take the screenshot live as otherwise it's easy to move the priority over when it's idle thus making a fake..

regards
Raja

[raju]

No multiplier adjustment, not even with my ES.

I did get this to boot at 430fsb X 10 though, up from 380fsb with any other bios. I'll do the vmods tomorrow and see how high it will go with the E6700es; I only got to play with it a little this evening on my homade single stage phase unit, so far I could boot at 430fsb and clockgen to 4.45ghz @ 1.53vcore. This board is really looking up :)


try read delay 7, pcie at 115-120mhz, 1.85 vnb, mind you 430fsb is 4.3ghz on an e6700..

regards
Raja

[erwinz]

that would be nice.. waaa.. I miss my board.. :)

go go go raju.. :rocker:

[raju]

just got hold of the bios that Tony opened up and I'm testing with rms 64us now. Cas 4 on old timings with rms 64us (455fsb) won't boot. I can loosen the timings and run cas 5, no probs (running Orthos blend as I type this). I may fiddle with drive strengths and secodary timings tonight to see how far I can go with cas 4 and good performance. Bottom line I guess the new revision is better geared for the tighter more aggressive memory timings. I'm happy to stick with the older board for now though until I see how much more the newer revision can take. A simple nb mod to 1.85 gives spectacular results..

regards
Raja

[ooztuncer]

raja,
good results mate - keep pushin it :toast:

[raju]

It's so easy to overclock with this new bios that it makes a person look better than they are..lol..


regards
Raja

[raju]

ok with this Tony modded bios vnb at 1.75 and 445fsb @ 4-4-4-12 - rms at 64us, read delay 6, you can boot up but Orthos will fail. I think more vnb will solve it, but that means modding the board, which is not something everyone wants to do... I can run at vnb 1.85 if you guys wish..


Hopefully someone will have a new board soon and clue us up with some results...

regards
Raja

[JoeBar]

At last! This is what the board needed. Nice results and great news to the DFI 975x owners. If any left... :)

[toddm27]

well my board showed up today from newegg, but it's the old rev :(, I should have some results in a day or 2 though

[Revv23]

raju, run at nb 2.0v for pete's sake, thats where 975x shines my friend. ;)

I want to see how far she goes on 2 :)

[raju]

maybe I can try 2vnb next week..

[Tancoll]

Going to dreamhack tomorrow. Hopefully i will be able to use a cascade on my 975x/g motherboard to max it out. :)

I will se where im maxing out.

Is there any easy voltmods, just in case :)

[toddm27]

http://www.xtremesystems.org/forums/showthread.php?t=107036
there you go, pretty easy, I'm gonna use a grabber and ground to a couple fan headers to test it out and see how it does in a few min's, :D

[Revv23]

hey raju what NB cooling do you have? 2v isnt a good idea on stock.

[raju]

hey raju what NB cooling do you have? 2v isnt a good idea on stock.


you think I don't know that?:D


(I already know there's not much between 1.85 and 2v as I've tried it on my older board btw)

I have a thermatake extreme spirit II, and extra 90mm fan at full blast aimed at the nb, temps never range above 42 degrees at 1.85 and that's when the ambient is around 22 degrees..

My Striker Extreme has arrived so I dunno if I'm gonna have time to do anything else now....

regards
Raja

[cozpolt]

I RMA'd one of these straight across for a p5b-d. Any tests with a lower multi C2D? I'm curious as with the previous bios I was only able to hit 320 fsb stable with my E6300, where it will go past 550 on my p5b-d.

[Revv23]

Nice results.

You will get much better Pi results if you run 4:5 or 2:3. Memory speed is generally more important in Pi than FSB.



Hey S_B, on 975 it's generally faster to run 1:1 with tight latencies.

Certainly below 400 fsb 4:5 is nice but better off 1:1 3-3-3 at 450, if you can.

[MrDeeds]

I RMA'd one of these straight across for a p5b-d. Any tests with a lower multi C2D? I'm curious as with the previous bios I was only able to hit 320 fsb stable with my E6300, where it will go past 550 on my p5b-d.

which is why people with 6300s don't buy 975x boards.

[sierra_bound]

Hey S_B, on 975 it's generally faster to run 1:1 with tight latencies.

Certainly below 400 fsb 4:5 is nice but better off 1:1 3-3-3 at 450, if you can.
I did this almost two months ago using 4:5 and FSB over 400. Still the fastest 32M in the world with single-stage cooling. Was using P5W64-WS.

http://img434.imageshack.us/img434/6606/32m459845kz7.jpg

[cozpolt]

which is why people with 6300s don't buy 975x boards.

Meh.. Helped a friend setup his 6300 system with a P5W-DH.. he runs 24/7 @ 475 fsb stable. The fact that the old bios on that board couldn't get past 320fsb is not a statement about the 975x. I know the 965 is best fr max fsb, but 320mhz is no where near the limit of what the 975x is capable of.

[Ten]

Ok sry if im a littlebit off topic but i can't find anything about my problem, i'm using DFI 975X (11.15 bios) board since yesterday, for ex when i'm running orthos 400x9 for a while no problem but then it is like EIST is on or somthing because it lowers my fsb to 266 without any varning or something. And i can't find EIST on this board i disabled C1, when i priming according to core temp my temps is 53c on both cores. any ideas? it's something i missed in bios setup:/ well great board anyway changed from AW9D-MAX but getting frustrated now when i can't find the setting....:confused:

[toddm27]

I've noticed clockgen doesn't work right with my board, if I open it up, it defaults to 2.4 after being clocked at 4ghz from bios, it's a bug with the software I think, and although I don't have the new rev, it's def got alot of changed comp from the original board I had. :D

[boshuter]

I've noticed clockgen doesn't work right with my board, if I open it up, it defaults to 2.4 after being clocked at 4ghz from bios, it's a bug with the software I think, and although I don't have the new rev, it's def got alot of changed comp from the original board I had. :D

Clockgen does the same thing on mine. Just run it up to what ever you have set in bios and start working from there, it still works fine like that. I boot at 410 and clockgen to 455-460 or whatever I'm wanting.

http://img86.imageshack.us/img86/2356/46ghzcpuzwebtk7.jpg

[Polizei]

now you've got me tempted to pick one of these back up, I was about to jump on the 680i bandwagon, I'm needing a sli board for phase though, so I'm still weary of getting another 975 board and being disappointed. lmk if it goes any higher with diff dividers, or if 455 is the max

Dont know if this was mentioned yet, but theres a thread on DFI Street about using hacked drivers to use SLI on this board.

http://www.dfi-street.com/forum/showthread.php?t=66015

[dmdriver5]

I've been trying this bios and I've been having problems. I think one of my sticks of ram died cause of it and when I get to 400fsb or higher it only detects one core on my e6600. Has anyone else seen this happen?

***edit***

It seems to be affecting my video card as well (7950gx2). Only the first half is working, reinstalling the drivers did nothing, not even the control panel is there. Gonna switch back to a previous version.

[Revv23]

I did this almost two months ago using 4:5 and FSB over 400. Still the fastest 32M in the world with single-stage cooling. Was using P5W64-WS.

http://img434.imageshack.us/img434/6606/32m459845kz7.jpg


Oh wow, congrats! nice work!!!

guess 1:1 is only for xtreme cooling people.

I've been trying this bios and I've been having problems. I think one of my sticks of ram died cause of it and when I get to 400fsb or higher it only detects one core on my e6600. Has anyone else seen this happen?

***edit***

It seems to be affecting my video card as well (7950gx2). Only the first half is working, reinstalling the drivers did nothing, not even the control panel is there. Gonna switch back to a previous version.


Reseat EVERYTHING

[El Snorro]

Can I change my multi on this board in bios on my E6700?
Otherwise it is just always 10x and then I cant test my board max fsb...

I did enable the cpu multi thing in bios, but i cant find 6x to 10x setting anywere?
I am using the 97TIDA26 bios.

TIA!

[raju]

still screwing around with this board, could maybe go tighter, not something I've tried yet.

vnb is 2v

cooling is phase.

ram is team group 667mhz 2gb kit.

http://img141.imageshack.us/img141/3116/ddr1104ub3.th.jpg (http://img141.imageshack.us/my.php?image=ddr1104ub3.jpg)

[IluvIntel]

Can I change my multi on this board in bios on my E6700?
Otherwise it is just always 10x and then I cant test my board max fsb...

I did enable the cpu multi thing in bios, but i cant find 6x to 10x setting anywere?
I am using the 97TIDA26 bios.

TIA!

I can't change it with my E6600 so I doubt if you can do it with E6700. :(

What annoys me about this board is it refuses to boot with my OCZ Platinum xtc PC2-8000 sticks... :mad: and I am using the latest beta bios, the official bios does the same thing... :mad:

[IluvIntel]

I've been trying this bios and I've been having problems. I think one of my sticks of ram died cause of it and when I get to 400fsb or higher it only detects one core on my e6600. Has anyone else seen this happen?

***edit***

It seems to be affecting my video card as well (7950gx2). Only the first half is working, reinstalling the drivers did nothing, not even the control panel is there. Gonna switch back to a previous version.

Not having any problems at all only that it does not boot with my OCZ Platinum DDR2

I'm benching atm with my older Corsair 8000ULs but only in 2 x 512Mb config
see this thread for some of my results so far on 32bit XP Pro.

http://www.xtremesystems.org/forums/showthread.php?p=1918321#post1918321

[raju]

ask tony to see if the spd timings are ok on your ocz ram..

regards
Raja

[p0tter]

Raju, you rock keep pushing that board!

[Planet]

still screwing around with this board, could maybe go tighter, not something I've tried yet.

vnb is 2v

cooling is phase.

ram is team group 667mhz 2gb kit.

http://img141.imageshack.us/img141/3116/ddr1104ub3.th.jpg (http://img141.imageshack.us/my.php?image=ddr1104ub3.jpg)


Nice. Im running pi 1m at 465x10 on dry ice with my board. 1.8 to NB. Having problems with over 1.79v to cpu though board becomes very picky and doesnt like to boot.

[raju]

I am trying again at read delay 6 instead of 7 " 4-5-5-12. ras to cas 5 and ras to p 5 are mandatory over ddr1100 at 2.5vdimm, it's just the limits of the chipset. For benching more should be obtainable, I guess 1.79v is the max stable that the digital buck controller can push, without mods that is.

To date I have not seen many if any boards that manage drr1100 or so at cas4 on the 1066 strap for 8 hours orthos, so this board is really something (even if it does need a mod). This has got me curious of the b rev, as I am still on the a...

Hopefully someone can get a a vdroop mod cpt...

regards
Raja

[IluvIntel]

My board is AL0 rev. Somebody at the factory has penned in "L" over the 2nd 0.

[raju]

that's a strange one..

[IluvIntel]

I did this almost two months ago using 4:5 and FSB over 400. Still the fastest 32M in the world with single-stage cooling. Was using P5W64-WS.

http://img434.imageshack.us/img434/6606/32m459845kz7.jpg

Well, with an EE C2D its no wonder really. :)

Whats the highest you seen with E6600 in 32M on 975X ?

[raju]

the es's boot up a little easier on this board, I have an es too, but I'm now using a retail, Stability wise I can get both to 460fsb rock solid, but the es will boot on cold boot and reset a lot easier than the stepping 6...


the a stepping retail runs real cool in comparison to the es. Even on my evap the load temps are better volt for volt..

regards
Raja

[El Snorro]

does anybody know if there is any windows FSB ocing program around like clockgen for this board?
Thanks in advance!

[Skratch]

does anybody know if there is any windows FSB ocing program around like clockgen for this board?
Thanks in advance!

I use clockgen..you have to setup its clock chipset

I believe the clock generator for that board is ics9plr3509 apply that and read clock and it should work.

im using this board and im new to intel over clocking.If im not running 1:1 and using the 667 strap is the memory still running what cpuid says or is there another hidden divder like using a half multy on the amd rigs

I have my ram fsb @385 but the ram @482 5-4-4 (I cant go 1:1 because im using air and my setup tops out @ 3.5)

am I really running the ram that fast or is it only with 1:1 that speed?

[pcfreak]

So, did anyone tried what this new bios can do without the northbridge mod? Should be useful info for those without moding skills :D

[jabski]

nice work raju :)

[El Snorro]

damn i'm :banana::banana::banana::banana:ed because of my E6700(10x), I cant boot from bios with 401mhz fsb so the mobo will use 1333 strap... (cpu cant handle it)
I can only clockgen up to about ~390mhz fsb on the 1066 strap..

[loc.o]

Infinity (975) doesnt change from 1066 to 1333 at 401, its not P5B ;)

[Kallileo]

Am I the only one who can't pass 385 fsb on my 975X/g with E6400????
I have tried every availiable bios......

[Benny Lodewijk]

Am I the only one who can't pass 385 fsb on my 975X/g with E6400????
I have tried every availiable bios......

I'm using E6300 and got FSB 458 Mhz Super Pi 32M stable.

http://img.photobucket.com/albums/v648/b3nnylase/DFI%20Infinity%20975X_G/458pi32mdfi975x.jpg

can you share some BIOS setting ?

[pumbertot]

clockgen also wonkey here. it shows correct clocks when I look for clocks but not with PLL control. whe I adjust to ceratin FSB and set, I get a much lower CPU speed than should be. no use at all.

[Revv23]

Am I the only one who can't pass 385 fsb on my 975X/g with E6400????
I have tried every availiable bios......


its your ram

[Kallileo]

its your ram

Yes. I found it some days ago. When I raise the fsb TRFC timing goes too low for my Ram.

[realbus]

New bios on 975x (12/01/2006) is great i put 485 fsb and work very fine for me and no mods on 975x :banana:


http://img295.imageshack.us/my.php?image=imagem3wy4.jpg

[Skratch]

New bios on 975x (12/01/2006) is great i put 485 fsb and work very fine for me and no mods on 975x :banana:


http://img295.imageshack.us/my.php?image=imagem3wy4.jpg

I have been using that bios for a while and found out a few days ago that the beta 11/15 works the best for my setup

IM priming now close to 3700 on air I was stuck at 3600 with the new bios

[Kallileo]

New bios on 975x (12/01/2006) is great i put 485 fsb and work very fine for me and no mods on 975x :banana:


http://img295.imageshack.us/my.php?image=imagem3wy4.jpg

What memory do you use?

[realbus]

ddr2 533mhz samsung on 400mhz not 1:1

[JWilson]

Rebels Haven has posted a mod of a beta bios(97TID213) that has Vdimm adjust to 3.025V. Look here..... (http://www.rebelshavenforum.com/sisubb/ultimatebb.php?ubb=get_topic;f=54;t=000036)

[andrey_sebastia]

My highest FSB 422 on phase BUT ...

I have awesome vdroop

http://img132.imageshack.us/img132/1421/dfidroopzg8.jpg
Beginning with FSB 417 the system only boots as COLD system
after 5 minutes it won't boot,
it boots again after many hours without power

Raju, what are your V-core voltages and your v-droop ?

[Kallileo]

I have the same problem...
My highest fsb is above 430+ but my 6400 many times doesn't boot when I set the fsb over 415...but it's absolutely stable.