Overcloking 3800+ X2 BH-E4 [Archive]

View Full Version : Overcloking 3800+ X2 BH-E4

Wh1t3

10-08-2006, 08:55 AM

I was success to reach 2.8GHZ with this CPU
but it's not stable(SuperPI , Prime95 wont run) and i would like to know if i can do anything about it
there is some pics

http://hwzone.co.il/community/index.php?action=dlattach;topic=208732.0;attach=73 425;image

http://hwzone.co.il/community/index.php?action=dlattach;topic=208732.0;attach=73 427;image

http://hwzone.co.il/community/index.php?action=dlattach;topic=208732.0;attach=73 429;image

Everest Memory Read:
7857MB/S

Everest Memory Write:
7942MB/S

Everest Memory Copy:
7009MB/S

Everest Memory Letency:
42.6ns

Temps are okay about
CPU: 47C
PWM IC: 45C
Chipset: 50C

My RIG:

DFI LanpartyUT nF4 Ultra-D(BIOS 06/04/2006)
AMD Athlon 64 x2 3800+ Manchster BH-E4
Thermaltake BigTyphoon + CoolerMaster UV Fan 120mm
2x512MB TwinMos Speed Premium PC3500(BH5) + Passive
Cooler and Active Cooler Neon Crab EC-MNC-E
XFX 7800GT PCI-E x16 + Zalman FC-ZV9
WD 200GB SATA II(WD2000JS)
WD 200GB IDE(WD2000JB)
Ocz PowerStream 520W
Thermaltake ARMOR Case(VA8000SWA)
ViewSonic VX924
Lite-ON SOHW-1653S DVD Burner
Lite-ON SOHR-5238S CD-RW Burner
Logitech X-530
Evercool VC-RF For Chipset

kostek13

10-08-2006, 09:27 AM

i have the same cpu + dfi expert... my cpu max full stable is 2700mhz on my prommy mach2 :/

SaFrOuT

10-08-2006, 09:31 AM

ur Vcore is VERY VERY high for 24/7

Wh1t3

10-08-2006, 10:17 AM

I don't searching for 24/7

ANP !!!

10-08-2006, 10:21 AM

Nice Clocks. Even Better RAM Timings.. OMG just look at those timing. Great :slap:

Wh1t3

10-08-2006, 10:34 AM

but it's not so stable

DAK1640

10-08-2006, 11:02 AM

ur Vcore is VERY VERY high for 24/7
What are you talking about, his vcore was only 1.35v...I run 1.5V 7x24

Wh1t3

10-08-2006, 11:14 AM

Cpu-Z lying my vcore is 1.65V, from some reason i dont know why cpu-z dont show voltage higher than 1.6V

SaFrOuT

10-08-2006, 01:28 PM

What are you talking about, his vcore was only 1.35v...I run 1.5V 7x24

check his settings not the screenshot

1.5 x 110%

Juggalo_X

10-08-2006, 01:54 PM

set your timeings 2-3-2-2 or 2-2-3-2 timings that seemed to clear up my stability problems whit this board

afireinside

10-08-2006, 02:32 PM

1.65v is fine I ran it for 10 months 24/7 on air/water.

Wh1t3

10-08-2006, 02:35 PM

I tried higher timings like 2.5-3-3-7