View Full Version : 1700+ Dlt3c Xpwm
twiztdskatr
04-15-2003, 12:43 PM
w00t w00t and with POS Volcano 7 and STOCK voltage :D
Think this is good or should i trade it out for a UPWM and use it on my watercooling?
antipop
04-15-2003, 12:48 PM
Damn guy, you got a killer chip bump the voltage wc it and let it fly! I've ordered a cpui but they ar ewaiting for a new batch so i hope i'll get a good stepping
twiztdskatr
04-15-2003, 12:49 PM
Im trading this chip for a UPWM b/c ive seen better results on those such as the 2.6Ghz one on air, im gonna order the final parts of my waterrig later today, so its gonna be fun times :D
JNav89GT
04-15-2003, 12:56 PM
well I think that's pretty good for stock voltage
bump the vcore to 1.8 and see what she'll do
if you can get 2.4-2.5ghz I think that's good
over that is cake and not a given no matter what number/letter core u get as far as I know
twiztdskatr
04-15-2003, 01:16 PM
Well, we'll see what happens:D
I think it should be XPMW and UPMW (not WM) yes?
antipop
04-15-2003, 01:58 PM
twiztdskatr why don't you try your chip on your wc sys with some more voltage before trading it?
ps Ewok you're right
Lunatic
04-15-2003, 03:11 PM
Originally posted by antipop
twiztdskatr why don't you try your chip on your wc sys with some more voltage before trading it?
ps Ewok you're right i second that. plus those Xpwm seems to like voltage more than other
twiztdskatr
04-15-2003, 04:35 PM
I was getting someone else to order it for themselves, then i would trade chips with them...Ill let him try out his own chip first.
TheDude
04-15-2003, 06:53 PM
Why not a 1.5v WPMW?;)
my cpu was fine at 2200mhz as well. stock 1.5v was all it needed. 2500mhz needs more than 2.15vcore.
dykz34
04-15-2003, 09:42 PM
Originally posted by TheDude
Why not a 1.5v WPMW?;)
I just ordered one yesterday! :D Im excited to get it since the 1700+ im on now (0251 JIUCB) sucks. :(
AMD Engineer
04-16-2003, 01:22 AM
I also have a xpwm 0310
Its sick, also doing 2,2G´s @1,5 (real 1,52)
Im waiting for 512megs OCZ PC3500 to bump in next week, then itll go higher im confident bout that :P
I got an 0308 SPMW XP1700+ DLT3C here in my 8RDA+ running at 2500 with 1.85v. Prime 95/3dmark stable.....tried two other of the same stepping.....one hated any voltage over 1.7v, but ran at 2400 with only 1.675v, the other went to 2300mhz at 1.75v.
May pick up another today to try out!!
same problem as i got with my 0307 DLT3C bito, it just hangs as soon as i try and do anything with it at anything over 1.7v.
and at 1.7v it only does 2200 stable.
I got a DUT3C and even that does 2300 at 1.89v so im getting more out of that than i can out of the DLT3C!!
I think is just pot luck, pick any DLT3C JIUHB and pray its a good one, i dont think looking at any of the other stepping info makes any difference what so ever.
twiztdskatr
04-16-2003, 12:45 PM
pretty much any DLT3C does gnarly ass overclocks :D isn't it great?!
OK....picked up another one today...same 0308 SPMW....currently running Prime95 at 12.5 x 200, 2500mhz at 1.85v.
This one again is ok with higher voltages. Will be gunning for more later!!
Xizten
04-28-2003, 02:32 AM
What du u guys think of a 0311 XMPW?
My 0308MPMW isn´t så fun, only 2 ghz stabel on 1.5v
bito what cooling you using on that at 1.85v? and what temps?
mine is doing 2455 at 1.825v but just wouldnt do 2500 at all even at 1.9v, i think it may be psu or temps stopping it. i keep getting MACHINE_CHECK_ERROR bsod's all the time.
pfoot
04-28-2003, 05:17 AM
I have 2, 0310 XPMW's, got them for the kids' boxes. Initial testing for both indicated 2.25 @ default voltage and a maximum of 2.5 @ 1.85 volts. Temps were pushing 52C with an AX7 and an 80mm Delta SHE. I only ran both chips for an hour or 2 on an AT7-MAX2. Maximum FSB obtained on that board was 205 for both procs. One more thing, temps went through the roof when volts were increased to 1.95.
Overall not too shabby?
pfoot
EWOK.....i am using Swiftech Q-Power watercooling.
This was on my now deceased 8RDA+....just got my NF7S V2.0, so having a play with it now.....undervolts quite a lot compared to what you put in the bios!!
Learn
04-28-2003, 11:58 AM
hi
0308 XPMW watercooled
prime95 2646 @ 1.94v (mbm) and 2620 @ 1.9v
wc + ice :D
screen max :rolleyes:
http://membres.lycos.fr/ftpad/images/ABIT-NF7-S/record/1700+ICE2792MHz.png
im just trying to work out exactly how im getting load temps of 61c with an SLK900 and 92mm 47cfm papst at only 1.825v and yet everyone else reports far lower temps than that even with more voltage.
ive reseated it twice, even tried shinetsu crap instead of as3. cant work it out and its driving me mad as temps are holding it back a lot.
open the case side and temps drop 10c even though ive got 2 intakes on full speed and an exhaust in this pc60.
TheDude
04-28-2003, 12:21 PM
If your temps drop 10 degrees when you take the side cover off, that suggests to me that something is wrong with the air flow inside the case. Try playing with your fans, change location, reverse direction of flow, etc. Maybe try one fan blowing in at front and 2 blowing out in rear? Are you wires and ribbons neat? Any restrictions on airflow? Something must be wrong to get a 10 degree drop when you take the cover off?
antipop
04-30-2003, 11:57 PM
What kind of fan are you using in your case? Maybe they're not powerful enough
i cant have 2 fans at the rear. its a lian li PC60. 2 at front, 1 at rear and 1 on top which has absolutely zero effect.
the fat at the back isnt getting th heat out well enuff so im gonna stick my delta there today and see wot happens. at the moment its so hot im having to use a 92mm fan balanced on the power cable in the middle of the case pointing at the nb and cpu. that knowcked about 5c off nb and 3 off cpu.
Liquid3D
05-01-2003, 08:04 PM
Originally posted by twiztdskatr
Im trading this chip for a UPWM b/c ive seen better results on those such as the 2.6Ghz one on air, im gonna order the final parts of my waterrig later today, so its gonna be fun times :D I don't beleive there are "UPWM" it's UPMW
Liquid3D
05-01-2003, 08:06 PM
Originally posted by AMD Engineer
I also have a xpwm 0310
Its sick, also doing 2,2G´s @1,5 (real 1,52)
Im waiting for 512megs OCZ PC3500 to bump in next week, then itll go higher im confident bout that :P You mean XPMW, right?
adamginz15
05-02-2003, 10:46 AM
Why being so smart?
just tell them how good is there oc and be done
with it...
Liquid3D
05-02-2003, 06:36 PM
I'm trying to determine if their juxtiposing the letters, or if that's the actual code. This is based upon my gathering empirical data for the last 5 weeks, in an attempt to verify or refute the accuracy of the following guide; http://lowyat.isentral.com/guides/athlonxp/
So while your projecting your frustration with "whatever" I'm here to learn, and share knowledge. The fact you think I'm being facetious may be indicative of your own propensity to do so? Irregardless, accuracy is critical when it comes to code identification. I care the advice I may give is as accurate as the advice I recieve. Ergo, if someone asks me a question, perhaps making a purchase based upon said advice, and the result is less then favorable, I won't have to apologize, saying; "...sorry, someone at Xtremesys forums, thought I should simply compliment an overclock, (instead of questioning the accuracy of the code) because it bothered them." That's "why so smart", as opposed to "so purblind/obtuse."
TheDude
05-07-2003, 02:36 PM
Point made...play nice:D
Liquid3D
05-07-2003, 10:46 PM
Well I apologize for being so grievous, however; i was simply trying to see if they got the codes wrong. However, I've found there are many more codes popping up, and they didn't.
:toast:
twiztdskatr
05-08-2003, 03:21 PM
long story made short: had fun with cheapo processor, hit 2.4 @ 1.75 on air, heading over to barton land now...
TheDude
05-08-2003, 03:41 PM
Originally posted by twiztdskatr
long story made short: had fun with cheapo processor, hit 2.4 @ 1.75 on air, heading over to barton land now...
No improvement over 1.75 vcore?
twiztdskatr
05-08-2003, 06:01 PM
2.5 @ 1.85
all air, but then it gets kinda hot.
theonetheycall
05-08-2003, 06:05 PM
I've been following these Wxxx and Xxxx stepping threads and performance of the 2 1700's, it seems the X's do great OC's I am leaning to getting one of those over the W stepping.
TheDude
05-08-2003, 06:06 PM
I bet it would go 2.8 in a prommie...that's not bad at all on air:D
Tweaked!
05-08-2003, 06:10 PM
No thats not bad at all. I would be just short of extatic in my pants if I could get that;)
sjohnson
05-09-2003, 04:12 AM
Keep working on those DLT's. 1700+ WPMW here, it did 2.2 at 1.55 the first week but would lockup randomly at higher speed/higher volts.
Kept after it with prime, f@h, memtest, gaming, sandra benches, 3dmark01 loops and it's now doing 2.4 at 1.75 on air, slk800 with tt sfII locked on high and stable after 72 hours of f@h. I can also now boot windows and even run a bench or two at 2.5/1.85v.
TheDude
05-09-2003, 04:37 AM
Originally posted by sjohnson
Keep working on those DLT's. 1700+ WPMW here, it did 2.2 at 1.55 the first week but would lockup randomly at higher speed/higher volts.
Kept after it with prime, f@h, memtest, gaming, sandra benches, 3dmark01 loops and it's now doing 2.4 at 1.75 on air, slk800 with tt sfII locked on high and stable after 72 hours of f@h. I can also now boot windows and even run a bench or two at 2.5/1.85v.
That's what I have noticed about these chips, they do better over time and seem to need to burn in. It took me a while to hit 2.8...I will try to get more soon, but it looks doubtful...rock solid at 2.8, but won't even post above that.
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.