FX60 meets modded mach2

[blander]

hi@all

i've benched with my fx60 cooled with a modded mach2 (thx to gray mole)

cpu: FX60
ram: 2x256mb infineon 6-A
mobo: dfi nf4 sli-dr
graphic card: single 7900gtx@stock
power supply: silverstone 650W

http://img154.imageshack.us/img154/52/fx603448mhzco1.jpg

http://img476.imageshack.us/img476/1524/fx603422mhz3dmark2001ko8.jpg

max. cpu-z validation was 3538MHz, but i've used ver. 1.35, not 1.36

[Absolute_0]

Nice clocks but the low bus speed really kills the ram.

Do the upward ram dividers work?

[blander]

Nice clocks but the low bus speed really kills the ram.

Do the upward ram dividers work?

which bios have an upward ram divider?

[Absolute_0]

I am not sure, would have to be a more recent one. I'm not even sure if they work because i didn't hear a lot about the upward dividers. But if they did work, then they'd allow you to use an FX on phase change without nerfing your ram.

[mouawad]

great clocks for a fx-60 + SS

[blander]

great clocks for a fx-60 + SS


thx, i hope i can get it under ln2 on the next oc session...

[ozzimark]

need more voltage! 1.35v is like.. stock :lol2:

[bazx]

thx, i hope i can get it under ln2 on the next oc session...

i would save ya money with the ln2 you are already on the ropes with what you have now

[Raybo]

need more voltage! 1.35v is like.. stock :lol2:


Yea, I was wondering about that also.

:stick:

[ncc-1709]

thats a mightaly poor pi time. i beleve i beat it with my 165 at 3.2ghz.

[ozzimark]

thats a mightaly poor pi time. i beleve i beat it with my 165 at 3.2ghz.
slow ram probably isn't helping ;)

[afireinside]

It's dual core. Run dual pi. Run some real volts and you'll get some impressive clocks ;)

[blander]

It's dual core. Run dual pi. Run some real volts and you'll get some impressive clocks ;)

vcore was 1.68v, not 1.35v ;)

[The Coolest]

http://www.thecoolest.zerobrains.com/apps/AMD64MemFreq.zip
Will allow you to change your memory divider in windows to anything the IMC supports

[lawrywild]

bigtoe 704-2bta has 233 and 250 option in bios ;)

[xlink]

Nice clocks but the low bus speed really kills the ram.

Do the upward ram dividers work?
bus speed is equivilent to 2000mhz FSB per component vs. 1066 shared for everything... bus speed isn't an issue...

[bigboi86]

bus speed is equivilent to 2000mhz FSB per component vs. 1066 shared for everything... bus speed isn't an issue...

If your ram speed depends on your bus speed, then yes it does matter :rolleyes:

Drop the multi down and do some real clocking!

[fatty]

Mav got this out of a modded mach I built

http://valid.x86-secret.com/show_oc?id=70955

[blander]

If your ram speed depends on your bus speed, then yes it does matter :rolleyes:

Drop the multi down and do some real clocking!

can't drop the multi, have a hard cold bug, but i will bench with upper ram dividers
@fatty
very nice result on a single stage :toast: