View Full Version : new WR 3920mhz e6400+ds4 489fsb!!!
ye_3333
08-10-2006, 09:06 AM
hello guys
just got my e6400 sl9s9
on gigabyte ds4
corsair pc8500 2x1g
ocz 600
ati 1800gto
i can boot 465x8=3720mhz
with 1.5v in bios this borad as big droop!.. need a mod for that..
soo all that with air.. ninja
i have here for later gas system ( -65c) but i will play with it tomarow:D
the problems i have is that i cant do 470 or more even with 1.6v!
what can be the problem?
i hope to get at least 3.9 on air 488x8
any help?
http://img50.imageshack.us/img50/2073/3711dx8.th.jpg (http://img50.imageshack.us/my.php?image=3711dx8.jpg)
ye_3333
ye_3333
08-10-2006, 10:15 AM
any help guys?
i relly cant pass 466x8 or 466x6 or 466x7 is all the same.. is there any mods for that board?
thanks
Sub zero cooling will help :)
celerity
08-10-2006, 10:54 AM
3,7 is a lot, you need better cooling I believe :)
ye_3333
08-10-2006, 10:57 AM
you think?
i hope you right..
i will start the work for gas cooling now.. and we will see..
thanks..
if some one have any athere idea it will be good?
ye_3333
celerity
08-10-2006, 11:03 AM
btw, does the heatpipes on ds4 help? or do you use any 3rd party NB cooler? also how hot is your nb?
Kunaak
08-10-2006, 11:55 AM
can you do me a favor?
run super pi at 3.6 ghz.
8 x 450, same cas and everything.
I been troubleshooting my PC for a week wondering why a few people got 15 seconds at 3.5 ghz, yet I can't get much below 16 seconds, even with MUCH faster ram, and running over 3.8 ghz.
yours is the first shot I seen, where I dont think it was unusually tweaked or anything.
celerity
08-10-2006, 12:54 PM
if you compare 8x450 conroe and 8x450 allendale, conroe will be round 13% faster in spi because of the cache
ye_3333
08-10-2006, 02:45 PM
this cpu is super great!!!
new WR for that one... it was 3904mhz..:D
http://www.xtremesystems.org/forums/showthread.php?t=59753
but now 3920..
this board have some problem like:
i cant work cl5 more then 440fsb!.. afthere that only cl4 and cl3 and is to mach for my crosair cl4 in 489fsb (4-4-4-5) in 2.4v!!! i can give more?
also i want to do some mode to this baby..:cool:
can someone give me some pic or links?
any help to get 4ghz will be great...
that speed ( 3920mhz) was made by my gas system!!!-30 in bios!!
:-)
thanks
ye_3333
http://valid.x86-secret.com/show_oc?id=111155
matt89
08-10-2006, 02:57 PM
here is a link to a e6400 doing 4ghz read through the thread
http://forums.overclockers.com.au/showthread.php?t=496732
Kunaak
08-10-2006, 03:04 PM
why are you trying to claim this as a world record?
I did 3.96 ghz over a week ago, with this... and that wasn't even really trying as I was just pushing the 8 multiplier for someone that wanted to see how high my CPU would go, with a higher multiplier.
that was in my 535 FSB post...
now I hear about some guy running 4 ghz with one...
not really seeing where you think this is a WR....
http://www.xtremesystems.org/forums/attachment.php?attachmentid=49870&stc=1&d=1154754283
Lestat
08-10-2006, 03:14 PM
Kunaak get 'em boy... sick 'em!!
Nasgul
08-10-2006, 03:14 PM
Because he's doing it on a retail/oem chip and not an ES. Maybe.
Kunaak
08-10-2006, 03:15 PM
Because he's doing it on a retail/oem chip and not an ES. Maybe.
why would that matter?
aren't most Conroe records still ES?
Nasgul
08-10-2006, 03:17 PM
From what I've seen, ES are overclocking sky-high, OEM/retail are falling far behind in comparison, well, mostly retail. There are several cases around here.
Kunaak
08-10-2006, 03:21 PM
why would that matter?
aren't most Conroe records still ES?
100% OC... done with a ES. Here (http://www.xtremesystems.org/forums/showthread.php?t=110808)
Conroe 9 second shot... done with a ES.
Again... (http://www.xtremesystems.org/forums/showthread.php?t=109717)
some stuff from OPB... done with a ES.
and Again... (http://www.xtremesystems.org/forums/showthread.php?t=110298)
since when did it matter where a CPU came from?
there's a thread over xtreme overclocking , WR database ...
It's saying 3.9ghz for E6400 - that's why he was mistaken ...
http://www.xtremesystems.org/forums/showthread.php?t=59753
Kunaak
08-10-2006, 03:24 PM
From what I've seen, ES are overclocking sky-high, OEM/retail are falling far behind in comparison, well, mostly retail. There are several cases around here.
ooook...
heres a retail 6800 doing over 5.3 ghz...
Here (http://www.xtremesystems.org/forums/showthread.php?t=110254)
and a retail 6600 doing 4.5 ghz... Here.... (http://www.xtremesystems.org/forums/showthread.php?t=110063)
point being, it doesn't matter where the CPU comes from.
in the right hands, any CPU of any potential can break a record.
retail... or ES.
doesnt matter.
its not where the CPU came from, that makes it OC well.
its the effort of the person with that CPU....
plz stop flaming him - plz read my message ...
It's explaining his mistake ...
Horigo
08-10-2006, 03:34 PM
Please tell me what bios to use with DS4
Because i have bios F2 and i cant reach more than 330 fsb
At 340 its not stable. i think its because of the bios i use
TL1000S
08-10-2006, 03:46 PM
@Kunaak:
I think Nasgul may have a point here..
It may seem that retail available Conroe CPU's are clocking badly compared to early reports with ES-chips.
Then again... those bad results may very well be due to "incompetent noobs" trying to OC there first Intel/Conroe system.
Most (if not all) early results with Conroe (ES) are done by quite experienced or better yet.. extreme experts here in the forum.. :)
Edit:
The usual terrible typos...probably more left.. :(
dissident
08-10-2006, 03:51 PM
it should matter where the chips come from practically speaking. I myself don't care if someone else hit 5 ghz with a chip that's not available to the general public, what I like to see is PRIME STABLE max clocks with RETAIL chips, not superpi stable or anything like that. This is the information that's useful to me. :)
Nasgul
08-10-2006, 03:57 PM
retail... or ES.
doesnt matter.
its not where the CPU came from, that makes it OC well.
its the effort of the person with that CPU....
Then I guess the effort that most people are doing is not good enough. Read here and you'll see (the whole thread that is): http://www.xtremesystems.org/forums/showthread.php?t=110003&highlight=P5B+DELUXE
4.5ghz on DI, so no air can be done at 4.0........and the only person (http://www.xtremesystems.org/forums/showpost.php?p=1632619&postcount=17) to have done it so far because I know sierra bound had an ES E6600.
It does matter to me because I'm going to buy a retail E6600 and to know that is not or could not be a good overclocker it's going to suck and as I asked in that thread above, I got no response which it could be the case on the effort part. Either way, good or no, I'm getting me an E6600.
Kunaak
08-10-2006, 04:12 PM
Nasgul, you completly lost me...
no idea where your going now.
all I can say, is your trying to create a distinction between ES world records, and Retail world records.
there isnt one.
are you really gonna go tell Coolaler "Nice 4 seconds on Super Pi 1M, with that 6.4 ghz Conroe 8900, but too bad its a ES"
or one of the 4-6 guys that get hundreds of sets of ram for free, from whatever company they work for... when they post thier next WR...
"nice WR.... too bad it wasnt retail".
oc course not, cause it sounds ridiculous.
a WR is a WR, where the CPU came from, has never matterd in the past, and it doesnt matter today.
ye_3333
08-10-2006, 04:51 PM
ok soo can you tell me what is the WR for 6400?
thanks and you dont need to be mad..
ye_3333
cupra
08-10-2006, 04:55 PM
ok soo can you tell me what is the WR for 6400?
thanks and you dont need to be mad..
ye_3333
its ok my friend, first of all - great results well done.
and i think the wr for the 6400 is a 4ghz (maybe more) is jest
mike didnt update the wr db for some time...
ArcTan
08-11-2006, 12:07 AM
ok soo can you tell me what is the WR for 6400?
thanks and you dont need to be mad..
ye_3333don't think it is
I've seen 4.2ghz with E6400 on ocau already by C-BuZz
4.2ghz screenshot
http://valid.x86-secret.com/show_oc?id=110973
and I think 4.1ghz highest 1M
LowRun
08-11-2006, 04:55 AM
From 6300 to 6700, retail C2Ds have locked multi which gives ES an indisputable advantage so someone can feel the need to specify that no other retail got the same result making it kind of a WR. In the end retail and ES results get mixed anyway to get the absolute WR. Splitting or mixing is everybody's choice :toast:
The Asgard
08-11-2006, 05:14 AM
Amazing clock m8. Very impressed
ye_3333
08-11-2006, 05:36 AM
ok soo now i do 3960 not stable:
http://valid.x86-secret.com/show_oc?id=111188
and 39004 pi 32mb stable!! and only 1.4v !!!!
the problem is that i do it with only one stick of ram and not dual!..
the problem is that i cant use cl 4 or 5 or 6 !! the bios all the time take it back to cl3 !! any help?
thanks
We want to see pictures ye_3333 ....
Pi 1mb would be nice ...
later we want pi 32mb ....
Keep the good work going.