Cal930 - X6800ES + DFI 975X/G @ 4950MHz

[sierra_bound]

Cal930 shows you can get a good overclock with the DFI Infinity board.

M/B: DFI Infinity 975X/G, BIOS: 707
CPU: Conroe X6800 ES
CPU Cooling: LN2
Chipset Cooling: MCX159-CU
Memory: TeamXtreemPC2-6400(DDR2-800)1GB×2
VGA: RADEON X300SE-X/PCI-E
HDD: HITACHI HDS722540VLAT20
Power Supply: Zippy-600GE
Vcore: 1.75V(BIOS 1.732V), Vdimm: 2.65V（BIOS）, Vio: 3.51V,
Vｎb: 2.0V
OS: Windows Server 2003 Enterprise

http://cal930.sakura.ne.jp/cgi-bin/c-board/file/10484_x6800.png

[eva2000]

nice :D

[freecableguy]

can you ask his NB temps at 2.0v pls.

-FCG

[guess2098]

DFi mobo = good cpu oc but can't do ram speed

[sierra_bound]

can you ask his NB temps at 2.0v pls.

-FCG
I asked, but no response yet. He sometimes stops by XS.

[NiCKE^]

Yeah that ram speed could be way better.

[vapb400]

hopefully we will have a new bios soon that elimnates the need to run the 4:3 divider when going for high FSB.

Those results are impressive though

[sierra_bound]

Running 4:3 ratio is not going to hurt you that much in 1M. I know this from personal experience. It seems to be the only way to get decent FSB on the DFI board.

Here are Tarosa's results on Infinity 975X/G for comparison.

http://www.geocities.jp/gbxfs134/10782.jpg

[Dumo]

Voltage options on unmoded Infinity 975X suffice for crappy single stage...

http://img157.imageshack.us/img157/8489/screenshot071dd2.jpg

[sierra_bound]

can you ask his NB temps at 2.0v pls.

-FCG
Got an answer from Cal930. He was using a 40mm Sanyo Denki fan. He said temp was around 38C when he checked earlier, before he started benching.

http://www.owltech.co.jp/products/case_fan/sanyo/40mmH/1.JPG

[Waus-mod]

wow.. nice oc.

Sierra can u ask how he passed 400fsb. for me its impossible even with 0707 bios. next the 4:3

[douirc]

nice oc! anyone know what to expect on air or h2o? can't afford an LN rig, so was curious what kind of oc and SPi to expect on a high-end h2o rig.

[CAL930]

Hi Sierra san Thank you for introducing it:toast:

DFI Mobo died after it had challenged once. :(

I will challenge again when ..new Dfi.. ..order.. obtaining it.

[freecableguy]

Hi Sierra san Thank you for introducing it:toast:

DFI Mobo died after it had challenged once. :(

I will challenge again when ..new Dfi.. ..order.. obtaining it.

probably too much vMCH


Got an answer from Cal930. He was using a 40mm Sanyo Denki fan. He said temp was around 38C when he checked earlier, before he started benching.

Thanks. Great temps. They are about 5C lower than mine when I use 1.85v. That Swiftech NB cooler seems to do it's job well.

-FCG

[hipogtr]

Thanx for the DFI numbers - good stuff!

[Waus-mod]

probably too much vMCH



Thanks. Great temps. They are about 5C lower than mine when I use 1.85v. That Swiftech NB cooler seems to do it's job well.

-FCG

Well my setup still lives after 2.3vmch.. i dont think thats it.

[sierra_bound]

wow.. nice oc.

Sierra can u ask how he passed 400fsb. for me its impossible even with 0707 bios. next the 4:3
Have you done the Vnb mod yet? Cal930 and Tarosa's boards were both modded.

[CAL930]

Well my setup still lives after 2.3vmch.. i dont think thats it.

HI Waus-mod

That goes for me, too.:D
I think it is unquestionable for VMCH.
The part where my MOBO breaks is FET:cool:
http://cal930.sakura.ne.jp/cgi-bin/c-board/file/mosfetmoe.jpg

[Waus-mod]

like i said :cool:

CAL930,

can u please tell me what u all did to go beyond 400mhz?

thnx

[CAL930]

like i said :cool:

CAL930,

can u please tell me what u all did to go beyond 400mhz?

thnx

Setting being written here (http://www.xtremesystems.org/forums/showpost.php?p=1540800&postcount=27)

Besides, any special setting is not done.
Whether 400mhz cannot be exceeded because of cpu?:confused: