E6700 @ 4.6Ghz with single stage cooling...

[freecableguy]

A little cooling, a little voltage, a little patience and here we go....


http://members.cox.net/kjboughton/11.125.JPG


-FCG

[ex2cib]

looking good FCG, any rosetta benchies with that :D

btw honk honk:p:

[Supertim0r]

wow, nice cpu :toast:
do you have a pic of your rig ?

[Pedro Rocha]

http://www.forumspile.com/That-Is-Excellent-MrBurns.jpg

Excellent for single stage phase Kris ;)

What was the CPU voltage on that run ?

Now let's see some 3D action :D

[ZX7891]

was mem 1:1 4-4-3-8?

[luf1c3r]

It seems that not, but there is a difference of power between the E6600 and the E6700, the bad thing is that the price is high of one to another :(
We will conform to with the E6600.

[freecableguy]

What was the CPU voltage on that run ?

Now let's see some 3D action :D

1.6375v by BIOS (about 1.6v real). this chip is amazing.

i can run 3D stable at 450x10 = 4.5Ghz :D


was mem 1:1 4-4-3-8?

yes

[Kesnel]

Awesome chip. :toast:

What vmch are you running?

[luf1c3r]

1.6375v by BIOS (about 1.6v real). this chip is amazing.

i can run 3D stable at 450x10 = 4.5Ghz :D

At 4,5Ghz stable, a very good speed for 24/7:slobber:

[tys90]

Very impressive. I've got the same mem except in PC2-6400 flavor, hopefully it does the job.

[cupra]

WOW, great work FCG, 4.6ghz for e6700 with SS :toast:
hope that one day will have chips like that ;)

[cupra]

WOW, great work FCG, 4.6ghz for e6700 with SS :toast:
hope that one day will have chips like that ;)

i guess that you use your asus.
any chance to do same numbers (460) with the b.axe?

[freecableguy]

i guess that you use your asus.
any chance to do same numbers (460) with the b.axe?

i think it can be done, bx will need a MCH volt-mod to go over about 440 stable if you have a good NB though...

[railer]

Good work, wow 4.5 3d stable on single stage is awesome. That is some powerfull silicon. Any idea what this cpu acn do with -28c air cooling? Cant wait to put one in my chillbox. Now i need to know if the Asus can boot with -28c temps since MB is submerged in a chiller. My last P4c had a coldboot issue over -20c.

[Getttosmurf]

so 4.5 on a ss ,,, mesa orders a ss on the spot and a e6700 to play with at launch :D :D thanx fcg this will be my 24/7rig sitting in my wardrobe

[Piotke]

Got the same setup. Chip is running with crappe phase at ~0 ° C, a bit higher actually.

1.6 Vcore set, 1.575 real.

~4.3 GHz:
http://www.meloen.be/soerpi_conroe_1.JPG

[hipogtr]

Awesome single stage results. Intel just keeps getting more impressive.

[Piotke]

Update:

Running at:
-- ~4 ° C
-- 1.575 vcore

I can run pi 1M at 4.4 Ghz.

[DTU_XaVier]

One word... :woot: :D
Great results there, now I want a conroe too :( wish I wasn't on holiday@launch :)

Best Regards :toast:

[Cornelious0_0]

Very impressive FCG...hopefully results like these ARE indications of retiail overclockability. If that's the case...then we can all start "forgetting" about AMD until they revamp AM2 and realise how much Intel has them hammered right now.

[Piotke]

Running mem sync (440 mhz) or assync (540) has barely no influence

http://meloen.be/soeperpi_conroe_4.4.JPG

[`odin]

Update:

Running at:
-- ~4 ° C
-- 1.575 vcore

I can run pi 1M at 4.4 Ghz.
dear god!
nice!:toast:

[stone_cold_Jimi]

OMG! Must get a new s775 clamshell kit for my Vapo before 24th July.

I've bought 2GB Ballistix and 2GB HZ, DDR2-1000 for the E6700, see what is best. Looking good, fcg.

[THX1138]

Hi FCG nice to see you using the single stage. Is that the Asus mobo your using ? I was also wondering if that is the max fsb on that mobo ? Oh yeah grats on the overclock enjoy :)

[zabomb4163]

*remembers when people called BS on freecableguy when he said conroe would do 4ghz easy*

[massman]

great chip FCG

[OMEGA3]

Nice results with single stage, FCG-san

The stand is also immediate for ten and nine seconds.
It is still ..B1step.. good.

I began also to work P5WDH and moded for new chip.

:toast:

[VoRtAn_MaDgE]

Nice results m8...amazing indeed ;)
May I ask CPU date code and batch ?
I will purchase a 6700 for me soon.
Great work :toast:

[ZX7891]

Nice results m8...amazing indeed ;)
May I ask CPU date code and batch ?
I will purchase a 6700 for me soon.
Great work :toast:

this thread is a month old

its an ES

[VoRtAn_MaDgE]

this thread is a month old

its an ES

I know i digged a bit (lol)
Did't noticed that was an Es :rolleyes:
My bad.

Cheers

[Kunaak]

whats your daily speed from this CPU?

[Garrett]

FCG, what'll it do on aircooling?
Or haven't you tried?

[freecableguy]

whats your daily speed from this CPU?

runs 24/7 @ 4.5Ghz (450x10). :)


FCG, what'll it do on aircooling?
Or haven't you tried?

haven't tried, this one went straight to phase

[unit365]

the problem is still an ES. What's about retail chips ? maybe not the same....

[uclajd]

the problem is still an ES. What's about retail chips ? maybe not the same....
Not a problem for FCG, just us. :lol: