Conroe under phase : 3DM03 WR and more

[Micutzu]

Mounting Vapo LS on the Bad Axe was a pain, but it was well worth it:

3DM03 WR: 52769

http://www.xtremesystems.org/forums/attachment.php?attachmentid=48965&stc=1&d=1152091318

Setup:

Conroe E6600 @ 1.68V Vcore, cooled by Vapochill LS
Intel 975XBX "bad Axe" fully modded (1.9V Vmch, 1.45V Vfsb)
2X1GB Teamgroup D9 DDR800 @ 2.6V
2X EVGA 7900GTX @ 1.68V/2.28V, stock cooling
Tagan U15 580W

[NoYd]

Very nice :eek:

:toast:

[hicookie]

congrats! 810/980 take 03 wr,impressvie!!

[Micutzu]

Also, E6600 max clock WR and Intel max FSB WR (equal to Kyosen, Clockgen's slider is at the end):

Vcore = 1.755V
Vmch = 2.005V
Vfsb = 1.4900V


http://www.xtremesystems.org/forums/attachment.php?attachmentid=48967&stc=1&d=1152091802

Validation (http://valid.x86-secret.com/show_oc?id=103626)

[ahmad]

And AM2 is nowhere to be seen...

[Micutzu]

And the first 3DM01 run, with moderate clocks on VGA and memory:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=48968&stc=1&d=1152091884

I had to stop everything due to early condensation problems (LGA775 is a b!tch to insulate), i'll start again later on.

[afireinside]

And AM2 is nowhere to be seen...

LIES! I see AM2 on my desk! It's pretty busy being slow :(

Nice results Micutzu! So close to 53k...

[FUGGER]

Grats on the milestones and WR.

[spiderr]

Good work M1 ! You know we're all so very proud of you right ?:D

[SoF]

wow amazing :eek:
Lovely '01 and still more in it.

congratz on the WR from here as well :toast:

[ojdr2001]

Congratz...

Really amazing the SLI power in Nature :)

The Vfsb mod, was it decisive to reach the 500 FSB?

Cheers

[zakelwe]

Good work ! :toast:

No gain for GT2, GT3 and GT4 I think ? If so then it is good to see 3dmark03 still being mainly gpu dependent ( unlike later 05 ).

Rather than FM ditch 2001 I think they should ditch 05 as it is included in 06 anyway. Then you would have gamers test as such

2001 = cpu test
03 = graphics test
06 = combined test.

( roughly speaking of course )

Regards

Andy

[dpa]

You must have a 03 backup with 200Mhz++ on cpu and 840/1000Mhz`on the gfxs?

[eva2000]

wow mch at 2.00v !

congrats!

[BlackX]

Nice volts man :slobber:
Congrats :toast:

[overcrash86]

nice, but only benchies at 4.13Ghz why ?

to try go over 500Mhz FSB use systool it work better than clockgen :)

did you try with 1.9v Vmch ? i can go to 498Mhz with ~1.880v but if i set more, can't go over 480Mhz...

[Micutzu]

I had to remount the Vapo head, running more benches as we speak. The Systool version i've tried doesn't support Bad Axe's PLL, will try more. Vmch scales very well, 1.97V for 497Mhz, 2.0V for 500Mhz for example.

Here's a 2001 with high clocked memory, VGA still has more left in it.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=48970&stc=1&d=1152100205

[dcg]

Subscribed :)

[TaPaKaH]

Good one :)

Gratz :toast:

[Cornelious0_0]

Wow...very nice indeed.

[overcrash86]

what is your NB cooling ? stock ?

[Micutzu]

Yes, stock cooling. Need 2V to bench at ~480FSB, guess i'm not going much further like this.

[overcrash86]

Yes, stock cooling. Need 2V to bench at ~480FSB, guess i'm not going much further like this.

i can bench at 485Mhz with only 1.880v...but i got a RAM limitation :slapass:

http://wowgame.free.fr/Conroe%20E6600%20ES/Aircool%20Noctua/SPI%2032M%20485Mhz%20FSB%20during%20done.JPG

[freecableguy]

Quick question, what vMCH did you need for ~450Mhz FSB....trying to validate my data. Thanks.

[Micutzu]

I could do 450Mhz at about 1.8V, not sure if less than that was OK because i didn't go under 1.8V :).

[FragTek]

Gratz mic, that's just insane!!! :toast:

[kempez815]

Whoa thats friggin sweet Grats :banana: :toast:

[funkflix]

Nice results! :toast:

[Rovtar]

lol nice :D

[Gautam]

Killer results! Congrats! Nothing like taking WR's with cards on stock cooling. :p:

[cMw]

very nice milestone and nice clocks on the GTX's

[ZX7891]

How hard is to mount vapo LS on badaxe? what was the problem?

[Micutzu]

Thanks guys :)
A little more pushing, i'm done for today.

3DM2001 : 75401

http://img248.imageshack.us/img248/803/754018rc.th.jpg (http://img248.imageshack.us/my.php?image=754018rc.jpg)

3DM03 : 53069

http://img289.imageshack.us/img289/9363/530695df.th.jpg (http://img289.imageshack.us/my.php?image=530695df.jpg)

3DM05 : 22868

http://img266.imageshack.us/img266/9774/228680rs.th.jpg (http://img266.imageshack.us/my.php?image=228680rs.jpg)

[Gautam]

How hard is to mount vapo LS on badaxe? what was the problem?

Most likely insulation. Caps are very close to the socket making it quite a chore, to say the least. Ever too common for LGA775 boards. :-/

[Micutzu]

How hard is to mount vapo LS on badaxe? what was the problem?

The caps/inductors are too close to the socket and the original mounting sits on them and not on the CPU. The head needed new mounting system and new insulation, i'll get some pics for you tomorrow.

[`odin]

Thanks guys :)
A little more pushing, i'm done for today.

3DM2001 : 75401

http://img248.imageshack.us/img248/803/754018rc.th.jpg (http://img248.imageshack.us/my.php?image=754018rc.jpg)

3DM03 : 53069

http://img289.imageshack.us/img289/9363/530695df.th.jpg (http://img289.imageshack.us/my.php?image=530695df.jpg)

3DM05 : 22868

http://img266.imageshack.us/img266/9774/228680rs.th.jpg (http://img266.imageshack.us/my.php?image=228680rs.jpg)

aargh you make me jalous ;)

[Brandybuck]

Wow:banana: this is conroe time :toast: congrats Micutzu..:)

[bonzo_catalin]

Once again M1 style :clap: I'll wait the pics about LS tomorrow .

[RoyaL]

:woot:
put sub better cooling on those baby mamas and break 01's @$$ :D

Gratz!!

[guess2098]

nice WR
can't wait to see 80k for 01 :D

[mikeguava]

INCREDIBLE SCORE!!!!!!!

Can't wait for Conore to get released so that these results finally get "real" WRs!!!!!

Keep on pushing!

[vanovich]

The caps/inductors are too close to the socket and the original mounting sits on them and not on the CPU. The head needed new mounting system and new insulation, i'll get some pics for you tomorrow.
yes pics please . and grats on those scores ,im going to run a similar system .and the mod on the clamshell would be great .thanks ,and keep up the good work.

[GoriLLakoS]

nice WR
can't wait to see 80k for 01 :D


Hold fore some days...and it is coming..:D

60K 03 is coming too...:D

[vapb400]

oh god. hipro got a conroe :)

[GoriLLakoS]

and some nice cards too...:D

[Heartfixer]

Aham... So? :rolleyes:

Congrats, M1, get it on and over with 2001 already :toast:

[vanovich]

well i began to panick after you said you had troubles with the clamshell and insulation .the 775 kit ,fits fine on bad axe .just tried ,and the capacitors are not so high .system aint up and running yet .but the insulation fittet fine around the socket .thought others had run badaxe and ls allready?

[dpa]

Conroe @ 4.8Ghz + 2 x 7950GX2 600/1600 = 60k in 03..

[marru]

Congrats, Micutzu.

With a little more tweaking I'm sure you'll hit the 76k in mark01.

How's the futuremark submission, still having problems?

[Micutzu]

Thanks guys ... can't wait to see what hipro can do with this kind of hardware :D.

marru, ORB submission is working but every uploaded score (Conroe or not) looks like in the attached pic.

[Punisher!]

Thanks guys :)
A little more pushing, i'm done for today.

3DM2001 : 75401

http://img248.imageshack.us/img248/803/754018rc.th.jpg (http://img248.imageshack.us/my.php?image=754018rc.jpg)

3DM03 : 53069

http://img289.imageshack.us/img289/9363/530695df.th.jpg (http://img289.imageshack.us/my.php?image=530695df.jpg)

3DM05 : 22868

http://img266.imageshack.us/img266/9774/228680rs.th.jpg (http://img266.imageshack.us/my.php?image=228680rs.jpg)
Grats mate! Just incredible!

[yotomeczek]

:woot: :woot: :woot:

[`odin]

Thanks guys ... can't wait to see what hipro can do with this kind of hardware :D.

marru, ORB submission is working but every uploaded score (Conroe or not) looks like in the attached pic.
at 0 mhz it wipes the floor with amd :clap: :D

[xwoodoo]

Congrats Micutzu :toast: .
Too bad it is only 6600 :( for shure this chip is capable of ~5G under LN2 .
For sure in the near future for #1 is neccesary ~5G chip (probably hypro is close to this).

[Moonman]

1124.1 fps on GT1 2k3mark :eek2:


That's some SERIOUS CPU power, and with stock cooled GPUs !
Get DICE on GPUs and unleash that dragon inside. :toast:

[Micutzu]

That's about it on this cooling, time to move on.

http://img212.imageshack.us/img212/6430/intel0067kh.th.jpg (http://img212.imageshack.us/my.php?image=intel0067kh.jpg) http://img204.imageshack.us/img204/5310/intel0078iv.th.jpg (http://img204.imageshack.us/my.php?image=intel0078iv.jpg) http://img212.imageshack.us/img212/111/intel0081bu.th.jpg (http://img212.imageshack.us/my.php?image=intel0081bu.jpg)

[-aDaM^]

75k wow, great job :toast:

[M3kk]

76k :P

[yori]

Felicitari Micutzu :)

[dpa]

sick score! Its a miracle nvidia dont allow SLI on intel chipset..

[massman]

is it just me, or should the lobby low run be at least 60 fps higher ?

[lawrywild]

awesome mate, really amazing

[G H Z]

is it just me, or should the lobby low run be at least 60 fps higher ?

Not on Nvidia cards ;) The system tests are slower than a comparable Conroe/CF setup because ATI is more efficient with system power in '01. However the Nature score makes up for that nicely.

Nice scores mic!

[massman]

Not on Nvidia cards ;) The system tests are slower than a comparable Conroe/CF setup because ATI is more efficient with system power in '01. However the Nature score makes up for that nicely.

thanks for pointing that out ;)

[k|ngp|n]

again, real nice job guys...took me out in 03' (unofficially) :D

[Zyklon5]

No Team CrazyPC/Romania this time .. it's all Micutzu's handywork .. all his.

Waiting for some LN2 action on that E6600.

[Micutzu]

FSB1066 strap is faster :)

[hipogtr]

Big congrats on the WR. Nice milestone!

[Staucher]

76K :toast:

[Cornelious0_0]

This is just unreal...congrats m8...you really do deserve it. :toast:

[Winterwind]

really nice results:clap:

[hipro5]

Way to go Micutzu......nice bench so far M8.......;)

Could you ran a WinRar bench......The WinRar V.3.6 Beta that support multicore.....?........Thanks......

[Micutzu]

I'm finished with the E6600 and i don't have it anymore, waiting for new CPU to get here :D

[sabinus]

yeah.. the E6800 beetch :slapass:

[[cTx]Philosophy]

kentsfield... kentsfield...kentsfield