phase change gallery

[shidokanjohn]

Here is mine

[kakaroto]

Well here is my Prom-Lian Li :d

Thanks TheDude for this beautiful piece of alu :D.

http://www.xs4all.nl/~famchow/mods/Prom_Li/Prom_Li.jpg


http://www.xs4all.nl/~famchow/mods/Prom_Li/Speedfreak.jpg

[TheDude]

kakaroto ,

Turned out real nice! Good job!
:toast:

[Gav]

I just setup my phase change the other week and my case (thermaltake Xaser III didnt go to well with it) so I took it apart until I get a bigger case:
http://img.photobucket.com/albums/v326/gav69/neverlearn.jpg
Its Fugly the now but I will work on beuty part soon.

[Aphex_Tom_9]

haha
"dude, what's all that stuff under the table?? a computer? looks pretty cheap, betcha my dell can beat it...oh no you say? you're on!"

[PMM]

This picture is not mine, but I was sent the pic... in my opinion its one of the sweetest case/MAch II mods ive ever seen!!

Thanks for the kinds words beacause its mine :D but its a mach1 ;)

I'm not aware of anyone else who has done a DoubleCoolermaster version

The build goes back to 2002 can be seen here.... (Also featured in PCformat Magazine).

http://www.brittech.co.uk/casemod.htm

orginal pic... http://www.brittech.co.uk/mypc.jpg

and the whole setup.... http://www.brittech.co.uk/pc1.jpg

[Cashman]

lol... small world eh!!

Glad you spotted it tho... But I have to admit that your case and the orac3 are the best two Ive ever seen!

I really would love to see the same doen to two Coolermaster Wavemaster cases... unfortunately I have not enough skill to complete the job to your standards!

Very well done tho mate, its gorgeous :)

[PMM]

I'd love to do a wavemaster as well have thought about it, but unsure how best
to make the base that looks right with the topunit.

Believe be I took my time something like 3months so i did not make any stupied
mistakes and alignment was hard.

The Coolermaster cases have raised ridges on the base inside so all the mounting holes
had to be re-done, then new bolt holes on the Prommy unit and Coolermaster case.

Scary stuff esp when you think how much these cases sold for back in 2001/2002

Ended with an rather interesting sound as well due to the sound insulation stuff used as well, it has this loverly breathing type sound to it.

Heavy though took it to a Lan once never took anywhere else since lol.

[eva2000]

I just setup my phase change the other week and my case (thermaltake Xaser III didnt go to well with it) so I took it apart until I get a bigger case:
http://img.photobucket.com/albums/v326/gav69/neverlearn.jpg
Its Fugly the now but I will work on beuty part soon.
very nice... that's what i want to do with my mach2 bend the hose that way but scared :banana::banana::banana::banana:less about breaking the hose :o

[zyx]

my 2 stage phase change

[kayl]

very nice zyx what gases is it running?
what temps ya getting.

[zyx]

very nice zyx what gases is it running?
what temps ya getting.

thanks man in first r507 and in second r503
temp realy i dont now. i dont have Thermometer in evaporetor. and i dont believe the bios

[Aphex_Tom_9]

as long as it's cold right? lol

[zyx]

i see at 3240+mhz at the spi 32m the dfi with speed fan 4.18 it shows me -16 with 1.84volt. but i dont believe what dfi sai to me.

[Unseen]

bre si thodori einai dynaton na to exeis dipla sto kalorifer?

[zyx]

bre si thodori einai dynaton na to exeis dipla sto kalorifer?

lol e? its ok christo (anigo parathira)

[kayl]

man you should get a temp gauge so ya can tune that cascade
503 boils at -87c whats 2nd stage low sides pressure
dt200's are quiet cheap and accurate

[Ssilencer]

This is my Custom made system and what it can do :D

http://fotos.miarroba.com/fotos/f/d/fd12a592.jpg
http://episode.serverdelsur.com.ar/Spika/silencer/6.jpg
http://fotos.miarroba.com/fotos/4/0/403eb3f1.jpg

1/3 hp comp lbp for r12 regassed with r502, custom condenssor and chily1 evap with my enclosure.
Rig in my sig.

[kayl]

very nice and nice pi score.

[Adasi]

That's cool :toast:

What are your idle and stress temps?

[Ssilencer]

That's cool :toast:

What are your idle and stress temps?

-38c/-30c in the evap

[fatty]

Anyone seen this at extremeprometeia it's called a baker extreme it's a regassed mach2 GT R507 with a baker head on it and sexxxxxy black alu kit mmmmmm

http://www.extremeprometeia.com/PICS/baker/mb1.jpg

[LardArse]

Wow ZYX that is the first "white" cascade I've seen! Great work!
Fatty that looks damn slick!

[fatty]

Not mine mate extremeprometeia's work wish i did have one but :(

[shidokanjohn]

here is mine....
http://www.thelab.gr/attachment.php?s=&postid=155008
http://www.thelab.gr/attachment.php?s=&postid=155010

[Aphex_Tom_9]

ooh, nice nice

[whitewolfgr]

here is my homemade single stage...R404 1/4 compresor with elevens evap.
http://briefcase.pathfinder.gr/download/thewolf/28638/366472/0/P1010001.JPG
http://briefcase.pathfinder.gr/download/thewolf/28638/366473/0/P1010004.JPG
http://briefcase.pathfinder.gr/download/thewolf/28638/366477/0/P1010008.JPG
http://briefcase.pathfinder.gr/download/thewolf/28638/366478/0/P1010011.JPG

[Aphex_Tom_9]

wow, that's nice.
that first pic scares me tho...

[eR1k]

whitewolfgr thats one awesome single stage cooler !

[evassion]

I want photos please

[fatty]

Anyone seen this from extremeprometeia they say it's the first of perhaps many chilly1 extreme's but this isn't finnished yet but looks nice I think I need one
http://www.extremeprometeia.com/PICS/baker/chily1.jpg


The full article is HERE (http://www.extremeprometeia.com/forum/showthread.php?p=11476#post11476)

[Overklokk]

Here is a gaming rig that i buildt for dpa :)

http://home.online.no/~kbudalen/dp%20dual%20prom/ferdig.../ferdig-011.jpg

The GFX prommy is dual evap for SLI card's.

[Aphex_Tom_9]

fatty- heh, nice sleeving on the hose.
overklokk- ...so beautiful...

[Sucka]

Nothing special.

http://www.suckasd.com/computer/fx55/mycomputer.jpg

http://www.suckasd.com/computer/fx55/water2.jpg

[shidokanjohn]

Here is one photo with prommie on card just for benching :D

[gkiing]

A couple of pics of my main rig.

[Frost_Bite]

Here's mine:

Baker made R22 rotary powered CPU cooler. It's a 10K BTU compressor with a Baker special edition block.

http://virtual-octane.net/cooler/cooler6.JPG

[TheDude]

Sweet! very nice rig...nice and clean looking! Are you thinking of encasing it?

(btw...please ask Nuclear to contact me if you talk to him...thanks)

[TheDude]

Fatty....here's a finished pic that was sent me...nice looking rig :up:

[olfen]

and heres my baby :rolleyes:

[=[PULSAR]=]

http://home.online.no/~kbudalen/dp%20dual%20prom/ferdig.../ferdig-011.jpg

Thats pretty cool Overklokk stacking the vapos, I was thinking about buying one and hooking it up to my ATI. How hard is the mounting? :)

[Eradicator]

Heres a few pics of my current and past projects, current one is a 1/5th hp inside the Lian Li.. All using r22 and self made evaps..

[Eradicator]

Couple more pics...

Thinking about making a small 1/12th hp unit to go in the front of the case to cool my X800XL... Case has so much room :D

[TheDude]

Some very nice mods there Eradicator! :thumbsup:
Thanks for sharing your ideas and your work...well done :toast:

[Eradicator]

Thanks TheDude, this stuff is very addicting.. When time and money permits, I hope to try my hand in making a cascade or two..

[Nerm]

Here's mine:

Baker made R22 rotary powered CPU cooler. It's a 10K BTU compressor with a Baker special edition block.

http://virtual-octane.net/cooler/cooler6.JPG

damn that baker looks familiar! lol :)

[Eradicator]

Small update on my system, added the gpu cooler...

[gkiing]

nice job cramming those vapochills in there! It's really professionally done and clean too :toast:

[GuGaCoSa]

I dont think this coolers is vapos hehhee,btw nice job =D

[gkiing]

I just assumed, it could be a custom job tho. Either way really sweet :D

[Ssilencer]

This is a system we build for a friend, Lian li pc70, watercooled an modded x800pro@xt pe@ 680/600mhz (gpu/mem) and a custom phase change system with a custom controller, far superior to a vapochill ls chillcontrol.
http://fotos.miarroba.com/fotos/f/9/f997c62a.jpg http://img185.exs.cx/img185/5922/dsc037325lc.jpg
http://fotos.miarroba.com/fotos/2/7/27f829aa.jpg

[gkiing]

Where'd you get that mounting kit? DIY?

[Eradicator]

nice job cramming those vapochills in there! It's really professionally done and clean too :toast:


Nope not vapochilles. 100% custom made running r22.. And its surprisingly not as crampped as it looks, that Lian Li is one big nice case :D

[Ssilencer]

Where'd you get that mounting kit? DIY?

This is one of our enclosures, chilly used them sometime ago.

[LardArse]

Need to do some cosmetic lighting/stickers, but here's a triple evap rig, an ultimate phase-change SLI gaming demo unit:

http://www.vr-zone.com.sg/Shamino/sliphase/12.JPG

http://www.vr-zone.com.sg/Shamino/sliphase/11.jpg

[gclg2000]

lol that's kewl. 1/4" plexi?

[blinky]

hey sham, did what legths and ID of cap tube did u use?

[wdrzal]

How did you get the polished edges on the plexi. walt

[LardArse]

hey sham, did what legths and ID of cap tube did u use?

for the dual evaps about 1.8m of 0.031, didnt want it too cold as this will be an exhibit unit running SLI cards whole days and can't have too huge insulation on the cards.
the base is thicker than that, while the covers are just a bit thinner.

[total_assault]

for the dual evaps about 1.8m of 0.031, didnt want it too cold as this will be an exhibit unit running SLI cards whole days and can't have too huge insulation on the cards.
the base is thicker than that, while the covers are just a bit thinner.
Where will the unit be exhibitted? it looks really good and professional if its close i mite go see it in person.

[LardArse]

Heh thx, it should be sitting in a computer shop here in Singapore

[total_assault]

Thats about halfway around the world either way east or west, so I think I will have to do with just pictures. :(

[Eradicator]

WOW superb work there.. What hp rating are the compressors and what gass you using in them?

[The Byter]

gj lardarse dude !

so simple and clean.

cpu cap tube ? temp ? load ?

[odb]

wow looks sweet, hope we see some pictures of it all lit up and in action

[afireinside]

Kick arse shamino! What case is that? And for a ghetto insulation/hold down on the CPU its pretty professional looking :D

[LardArse]

WOW superb work there.. What hp rating are the compressors and what gass you using in them?

Well this is not a crazy benching rig so I picked 2 1/6hp small compressors and used R22/R290
The cpu should do about -20c on load and the GPU about -10c to -5c on load.

[total_assault]

those are big for 1/6 ive seen 1/3hp compressors that big

[Nerm]

Need to do some cosmetic lighting/stickers, but here's a triple evap rig, an ultimate phase-change SLI gaming demo unit:

http://www.vr-zone.com.sg/Shamino/sliphase/12.JPG

http://www.vr-zone.com.sg/Shamino/sliphase/11.jpg

I think that is one of the coolest things I have ever seen. :) Great job man!

[LardArse]

Alrightie fellas, here's the updated look!

http://www.vr-zone.com.sg/Shamino/sliphase/13.jpg

http://www.vr-zone.com.sg/Shamino/sliphase/14.jpg

From behind
http://www.vr-zone.com.sg/Shamino/sliphase/17.jpg

http://www.vr-zone.com.sg/Shamino/sliphase/15.jpg

http://www.vr-zone.com.sg/Shamino/sliphase/16.jpg

Now I'm just waiting for some nice stickers which will be ready by Friday, that will be the final touch-up

[kayl]

:hm: :shocked:
very nice display there. does it for me

[REDKEN]

That looks great LardArse!!
Just out of curiosity. Did you bring the evaps for the GPU's from the right side because it was easier or just personal preference?

[LardArse]

Hi it was so that the "snakes" dont block the view of those cool hardware :D

[REDKEN]

Hi it was so that the "snakes" dont block the view of those cool hardware :D
Thanks for your reply!
I'm thinking of setting up something like what you have there, but instead of bringing them from the right I was thinking of setting them up on the far left (to the back of the case).
I just wanted to know if it was not a good idea to put them there or if there was something that I hadn't thought of yet that would kill my plans.
Anyways, I think they look cool were you put them. I might just have to go back to the drawing board.:)

Thanks for the info :toast:

[LardArse]

That would works as well just remember to L bend it to clear any caps from the sides.

[dward3]

Nice work LardArse.. Very clean and more lights plz! :slobber:

[odb]

how are the and phase change units and cathodes powered?

[shadowing]

Wow! I was kinda planning going that way for a rig... How big should the evaps be for an sli rig? I'd think the evaps may clash onto each other into the graphics card.

[l1mp4n]

could i use and hydralic tuba for suction? will it get much stiff when cold down ?

[Russell_hq]

If the tube has a metal core, you should be ok. If it is rubber lined then you may have problems with refrigerant diffusing through the rubber lining

[Sneil]

Hey LardArse, would you be able to post pic of a direct frontal view of the rig? is that case a Coolermaster Wavemaster? Ive actually been planning that design out for my (non sli) rig and was planning on getting that case if that's the one i think it is anyway. curious to see what it all looks like from the front, even if its not the case im thinking of.
anyways, if you can that'd be great :toast:

[dward3]

Sneil, looks like a stacker :D

[odb]

Sneil, looks like a stacker :D

nope not a stacker, stacker is way bigger then that case

[LardArse]

Sneil its a nice coolermaster cavalier...

[TheDude]

Need to do some cosmetic lighting/stickers, but here's a triple evap rig, an ultimate phase-change SLI gaming demo unit:

http://www.vr-zone.com.sg/Shamino/sliphase/12.JPG

LardArse,

Were you able to get equal gas to each evap on your video cards? If so, how? Just making the cap tube the same length? Do they both produce the same temps? That is the problem I keep running into and I'm now considering installing a CPEV. How about the same issue only with the cpu evap? How did you regulate it? Thanks ...very nice rig! :D

[LardArse]

The lower one would tend to get a bit more for some reason... easy way is to run shorter cap tubes, flood em nicely, get ample of refrigerant going, then it wouldnt be an issue but of course, no vaccuumic low temps.

[dward3]

nope not a stacker, stacker is way bigger then that case

Thanks for the heads up.. Its a cavalier.. :slobber:

[Eradicator]

Another one of my projects..

http://i3.photobucket.com/albums/y85/Zorkman/bored.jpg
http://i3.photobucket.com/albums/y85/Zorkman/IMAG0068.jpg

1/5th hp med temp tecumseh, homemade evap, running R22,YY-Cube case.

[thesaucier]

Another one of my projects..

http://i3.photobucket.com/albums/y85/Zorkman/bored.jpg
http://i3.photobucket.com/albums/y85/Zorkman/IMAG0068.jpg

1/5th hp med temp tecumseh, homemade evap, running R22,YY-Cube case.

What kind of temps do you see with r22?

[BLHealthy4life]

VERY nice! Extremely compact.

Is the compressor far enough away from the backside of the mobo to prevent your mobo from absorbing dissapated heat from the compressor?

[Eradicator]

The compressor doesnt seem to transer any of the heat, Its close to a half inch from the plate the mobo sits on, and the mobo is on standard case mounts from the mobo tray, The mother board tray doesnt seem to absorb any of the heat.. As far as temps go, I didnt bother with a temp probe on the evap, but speedfan using the motherboard sensor with my winnie 3000+ at 2850mhz @ 1.710v priming It shows around -20C full load and idles below -30C (board sensor goes wacky past that and reads -98C). The compressor Is nothing fantastic, but it was free and i threw this project together from start to finish in one day, so Im happy with it.. Also those temps are via the mobo so we all know that they are probably no where near accurate, if even close..

[fatty]

Duel chilly1 head action wooohooooo

http://www.extremeprometeia.com/PICS/spitfire/4.jpg

[fatty]

http://www.extremeprometeia.com/PICS/spitfire/2.jpg

[total_assault]

nice, i want a dual head one too :(

[MaSell]

very xtreme coooooling :clap:

[LardArse]

Up and running tada!

http://www.vr-zone.com.sg/Shamino/sliriger/sliriger1.jpg

http://www.vr-zone.com.sg/Shamino/sliriger/sliriger2.jpg

http://www.vr-zone.com/Stratix/VR-Zone_SLI_demo.jpg

[wambas]

Awesome!!

[odb]

damn thats pretty sweet looking, whats the hieght on that rig?

[trance565]

lol, dun look very user frendly ... tho if i had sumthin that big ... i would still atke it to my frends houses evonce in a while ... just to run up their electricity bill for the nite :)

[Aphex_Tom_9]

whoa...in the last pic there are 2 condensers in the bottom unit, while in the first 2 pics there's only 1..what's with that?

[LardArse]

whoa...in the last pic there are 2 condensers in the bottom unit, while in the first 2 pics there's only 1..what's with that?

I added another to improve capacity as the condensors are really small for dual evap

[Aphex_Tom_9]

I added another to improve capacity as the condensors are really small for dual evap
ah, i thought those looked small...

[total_assault]

dont look like it will use that much that much electricity, maybe 1/2KW/h?

[uclajd]

Up and running tada!That's an amazing looking rig, I mean just ridiculous.

But LardArse, I've never seen a good explanation of how you guys are getting past the cold throttle issue on those 6800s. :confused: :confused: :confused:

[LardArse]

That's an amazing looking rig, I mean just ridiculous.

But LardArse, I've never seen a good explanation of how you guys are getting past the cold throttle issue on those 6800s. :confused: :confused: :confused:

There are none at all on the ultra pci express models.
there are cold throt issues for some GT pciexpress models though.

[TheDude]

http://www.vr-zone.com.sg/Shamino/sliphase/12.JPG

LardArse,

Were you able to get equal gas to each evap on your video cards? If so, how? Just making the cap tube the same length? Do they both produce the same temps? That is the problem I keep running into and I'm now considering installing a CPEV. How about the same issue only with the cpu evap? How did you regulate it? Thanks ...very nice rig! :D
...

[waddupmm]

1st post here :) Heres some pics of the new rig im working on

http://img.photobucket.com/albums/v446/waddup858/DSC00103.jpg

http://img.photobucket.com/albums/v446/waddup858/DSC00102.jpg

http://img.photobucket.com/albums/v446/waddup858/DSC00107.jpg

http://img.photobucket.com/albums/v446/waddup858/Picture375.jpg

http://img.photobucket.com/albums/v446/waddup858/Picture376.jpg

[Sladky]

http://images.people.overclockers.ru/30704.jpg
http://images.people.overclockers.ru/30701.jpg
http://images.people.overclockers.ru/30703.jpg

http://images.people.overclockers.ru/30253.jpg
http://images.people.overclockers.ru/30252.jpg
http://images.people.overclockers.ru/22583.jpg

[CrashOv3r1De]

grats on the new rigs..looks like everyone is hanging out with their wang out!

[marvt74]

http://server2.uploadit.org/files/Marvt74-DSC00927.JPG

Belongs in here to i guess

And

http://server3.uploadit.org/files/Marvt74-DSC00924.JPG

[LardArse]

...
yo thedude, the only reason why equal cap lengths dont work sometimes is... the filter/drier.... different angles of tilt would cause different amounts of vapour and liquid to go into each cap tube. So either its one striaght 90 degree down , or tilt the filter around a bit at diff angles to get the evaps to frost up equally fast :D

[TheDude]

Thanks man....I never thought of that.

[kayl]

my current projects, been busy.
cascade r290/1150 cpu
autocascade r290/1150 gpu
dual evap r290 cpu/gpu

http://www.xtremesystems.org/forums/attachment.php?attachmentid=34510&stc=1

[Jack]

good work Kayl, but we want pics :D :fact:

[kayl]

good work Kayl, but we want pics :D :fact:
and what pics would you like

[Comp-Freak]

and what pics would you likeOther than a little red cross? ;) (http://www.xtremesystems.org/forums/attachment.php?attachmentid=34510&stc=1 doesn't work)

[Jack]

and what pics would you like
some general pics of the whole build would be nice :)

[kayl]

some general pics of the whole build would be nice :)

dont want to clog it up too much so just add links to project builds.
dual evap system (http://www.xtremesystems.org/forums/showthread.php?t=67924)
cascade (http://www.xtremesystems.org/forums/showthread.php?t=68791)
autocascade (http://www.xtremesystems.org/forums/showthread.php?t=55308&page=3)

[luks__pl]

My single-stege :)
http://luks.hardtech.pl/benching/FC/single-stage4.jpg
http://luks.hardtech.pl/benching/FC/oncpu2.jpg
http://luks.hardtech.pl/benching/FC/oncpu3.jpg
http://luks.hardtech.pl/benching/FC/oncpu1.jpg

[Bergo]

nice, but, whats with all the extra insulated suction line on top of the compressor? (maybe I missed something ^_^ )

[Athens[2004]]

i think this insulation is useless , or drop down the performance if it is what i think . In there u neen 2 exchange with house temp not insulate .

Thanx for my outstanding English . :hehe:

[luks__pl]

nice, but, whats with all the extra insulated suction line on top of the compressor? (maybe I missed something ^_^ )
It's heat exchanger :D

[Bergo]

HX o_O I see one compressor, or is it an autocascade or something, lol, pardon my noobishness :P

[RaVeN155]

It's a kind of heavy subcooling before liquid will go to cpev ;). And it works.. propably ^^

[luks__pl]

HX o_O I see one compressor, or is it an autocascade or something, lol, pardon my noobishness :P

It's a single-stage with heat exchanger :cool:

[The Byter]

The new look of the unit.
a black version very soon :)

http://www.xtremesystems.org/forums/attachment.php?attachmentid=35155&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=35156&stc=1

[JSU]

very nice. looks very professional! how did you make that case btw?

[Ssilencer]

The last two units

http://img346.imageshack.us/img346/3083/phasepucho0302cn.jpg

http://img346.imageshack.us/img346/7736/imagen385copia1sl.jpg

[zightx]

My previously setup of phase change's. :cool: Vapochill PE stand-alone to left och Mach1 R507 to right. ;) But I have sold the Mach1 and building a own singel stage system instead. :)

http://upl.silentwhisper.net/uplfolders/upload2/1zightx.JPG

http://upl.silentwhisper.net/uplfolders/upload2/2zightx.JPG

[Athens[2004]]

Ssilencer @ Extreme piece of Art !!!

[SustaiN]

Ssilencer. I'm crazy about that case. looks awesome!

[Think]

Here's my rid. :D

I machined the Mach Lian Li casing to match, including the rivets. Also added lighting.

[The Byter]

http://www.xtremesystems.org/forums/attachment.php?attachmentid=35311&stc=1

My black version.

[Ssilencer]

']Ssilencer @ Extreme piece of Art !!!

Thanks man!

Sustain
Thanks to you too!

[piotres]

The Byter - How much will cost that EMP K2 ? :p:

[The Byter]

The first units go @ 690$ before shipping :)

[Unseen]

http://img389.imageshack.us/img389/5793/15yb1.jpg (http://imageshack.us)
http://img389.imageshack.us/img389/1715/20gc1.jpg (http://imageshack.us)
http://img389.imageshack.us/img389/2322/34pe.jpg (http://imageshack.us)

[Think]

Here's my rig.

http://img198.imageshack.us/img198/6585/p10106340uc.jpg
http://img391.imageshack.us/img391/9126/p10106383uf.jpg
http://img391.imageshack.us/img391/9999/p10106350ko.jpg

[Ssilencer]

Our last unit, the MCT IV


http://img54.imageshack.us/img54/6963/mctszw11uu5gy.jpg

http://img389.imageshack.us/img389/3931/expo002medium3zj.jpg

[Jort]

your unit is in good place here, looking forward to the next one ;)

[Ssilencer]

Thanks Jort :up:

[SustaiN]

WOW Ssilencer!!! You've done an amazing job! That is the most awesome case I've ever seen!! damn!!

[404Power]

Thats a really beautiful case! ;) :banana:
Keep it up like this! :D

[Ssilencer]

We are in the next stage, we are designing an entire phase change Computer case, with our single unit+ G-Froster controller inside obviously, there would be a limited edition, so the guys that buy them, will have an unique unit in the world... more info on this later.

[the_new_guy]

cool rig ssilencer

[slimais]

Nothing special, just Vapo LS+Chieftech Case (im going to buy a new one, blue&silver colors dont match as you can see :( Lian Li PC-V1100 is my next choise )
config in my sig
http://www.xtremesystems.org/forums/attachment.php?attachmentid=37226&stc=1

[cinOxen]

Just a simple Mach II GT with no mods other than wire sleeving. This was my first rig with anything but air and it was a challenge! The next one will definitely by some sort of custom phase change but one step at a time.

More here (http://www.xtremesystems.org/forums/showthread.php?t=74658)

http://www.hypernexussolutions.com/cinoxen/pc/23.jpg

http://www.hypernexussolutions.com/cinoxen/pc/18.jpg

http://www.hypernexussolutions.com/cinoxen/pc/24.jpg

[the_new_guy]

are those integrated speakers?

[the_new_guy]

are those integrated speakers?

cool Rig!!

[TTmodder]

i think it's fans behind some dust mesh filters

[cinOxen]

are those integrated speakers?

cool Rig!!

Thanks!

TTmodder is right they are just fans but I like that idea!

[the_new_guy]

v2.0

[ye_3333]

ENJOY!!...
YE_3333
HWZONE
ISRAEL BEST SYSTEM!!
http://img167.imageshack.us/img167/5785/144zd.th.jpg (http://img167.imageshack.us/my.php?image=144zd.jpg)

http://img167.imageshack.us/img167/4884/35of.th.jpg (http://img167.imageshack.us/my.php?image=35of.jpg)

[Unseen]

http://img479.imageshack.us/img479/115/hpim17985vd.jpg (http://imageshack.us)

http://img422.imageshack.us/img422/8541/hpim17990sg.jpg (http://imageshack.us)

http://img429.imageshack.us/img429/4985/hpim18006xj.jpg (http://imageshack.us)

http://img432.imageshack.us/img432/1226/hpim18014oy.jpg (http://imageshack.us)

http://img447.imageshack.us/img447/3079/hpim18026wi.jpg (http://imageshack.us)

[Aphex_Tom_9]

oooooh that's slick, Unseen

[RussC]

very clean, nice work,

RussC

[MeltedDuron]

wow Unseen, thats amazing! How much did it set ya back?

[Dumo]

Heres....

http://img413.imageshack.us/img413/2645/mvc173f8il.jpg
http://img413.imageshack.us/img413/5953/mvc172f7be.jpg
http://img413.imageshack.us/img413/7343/mvc174f2yv.jpg

[n00b 0f l337]

Nice Yellow Box.

[pazza316]

Hey unseen I dont see a fan on the condenser :slapass: -lol!

Great looking SS though :woot: what temps do you get?

[n00b 0f l337]

Its there pazza.

[Unseen]

i have put fans but they r not in those photos...

[pazza316]

Great work anyway Unseen.

[SustaiN]

As always a REALLY kick a** looking SS by Unseen. love them ;) keep up the good work bro!!

[Unseen]

thanks guys. :)

The new better cases will arrive this week...

and a last pic..

http://img500.imageshack.us/img500/2028/hpim18065ox.jpg (http://imageshack.us)

[Athens[2004]]

Unseen... the boy who makes all the Greeks Coolest :hehe:

awesome this last unit keep it up

[The Byter]

Hope u like it.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=39941&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=39942&stc=1

[johann]

nice unit, I like the case :)

[Entsafter]

I love this Lian Li style :D
Great job!

[SustaiN]

Ohh man that's a nice unit. I love the case.

[The Byter]

:toast: guys !

[SustaiN]

The Byter, are you using a chilly1 evap? :)

[The Byter]

true

[Unseen]

this belongs here http://img174.imageshack.us/img174/7185/hpim18274rz.jpg (http://imageshack.us)

[chilly1]

Very nice work!!!

[the_new_guy]

Heres....

http://img413.imageshack.us/img413/2645/mvc173f8il.jpg
http://img413.imageshack.us/img413/5953/mvc172f7be.jpg
[i
mg]http://img413.imageshack.us/img413/7343/mvc174f2yv.jpg[/img]
love the skull

[kender]

And this iw my single stage made by unseen :)
http://images5.theimagehosting.com/HPIM1906.jpg

[Entsafter]

http://img413.imageshack.us/img413/6338/dscn09016wh.jpg

http://img413.imageshack.us/img413/9553/dscn09047so.jpg

http://img413.imageshack.us/img413/7116/dscn09063wt.jpg

[Skinny13]

a recent one
http://img482.imageshack.us/img482/6259/56kx.jpg

infos... here
http://octech.gr/forum/viewtopic.php?t=1245

[Alec]

sexy! :toast:

[Skinny13]

another one for a friend
Danfoss NL11F
Evaps ( http://www.octech.gr/forum/viewtopic.php?t=1684 )
r507

http://img124.imageshack.us/img124/8287/xs22bp.jpg

http://img460.imageshack.us/img460/1658/xs19yz.jpg

[z1erer [HWLuxx]]

Mach modded by ice-man
chilly1 eva, r404a, ..

http://www.z1erer.net/bilder/P-M/Komp/P-M_iso_06.jpg

some pics from the modification: http://www.extremecooling.net/randompics/ph/z1erer/

[Hugo van Dijk]

Prommy Batman.

Mach1, charged with R507, and Joe Cool Evap.

http://i48.photobucket.com/albums/f225/The-Bat/9.jpg

http://i48.photobucket.com/albums/f225/The-Bat/6.jpg

http://i48.photobucket.com/albums/f225/The-Bat/7.jpg

http://i48.photobucket.com/albums/f225/The-Bat/11.jpg

[before]

Some pics of my cascade... Made by Pgeo; and then modded by Luigi assisted by me

http://www.beforeoverclock.com/images/cascade1.jpg
http://www.beforeoverclock.com/images/cascade2.jpg
http://www.beforeoverclock.com/images/cascade3.jpg

[johann]

These belong here :D

Danfoss NL11F, R402, chilly1 rev e, G-FrosterXE, DimasTech case

Idle -59c Load -44c(150w resistor)

http://brown.srv2.com/~sokkiesc/Fotos/Phase_Change/Machkiller/Cased/final.jpg

http://brown.srv2.com/~sokkiesc/Fotos/Phase_Change/Machkiller/Cased/side%20open.jpg

Electrolux MP90FB, R402, chilly1 rev e, DimasTech case

Idle -53c Load -37c(150w resistor)

http://brown.srv2.com/~sokkiesc/Fotos/Phase_Change/9c%20lux1/S5020205.JPG

http://brown.srv2.com/~sokkiesc/Fotos/Phase_Change/9c%20lux1/S5020203.JPG

[Smy]

This is my single stage made by Overklokk

SP 32m 3400 mhz fx60 1,7v -44c.load Idle -51c tested by overklokk.
Danfoss NL11F, R507/R410a, chilly1 , FrosterXE


http://i23.photobucket.com/albums/b359/Overklokk/frost.jpg

http://home.no/smy/bula/IMG_0164.JPG

http://i23.photobucket.com/albums/b359/Overklokk/unit-vindu.jpg

[LittleDevil]

Single stage made for montenegro...

http://www2.shrani.si/files/picture0339840.jpg

http://phasechange.extremecooling.net/littledevil/montenegro's%20Single%20Stage/p051qo.jpg

[fatty]

Meh

http://gallery.greatestjournal.com/albums/up5/462/929462/front.jpg

http://gallery.greatestjournal.com/albums/up5/462/929462/Picture%20024.jpg

http://gallery.greatestjournal.com/albums/up5/462/929462/Picture%20033.jpg

[Xeon th MG Pony]

Absaluetly beauty full fatty!, the insulation realy contrasts the system nicely :)

[Overklokk]

Two new SS in my new cases:

One painted SS with Dimas evap and Golden Froster XE

http://i23.photobucket.com/albums/b359/Overklokk/DSCN6131.jpg

And one unpainted with prommy evap end simpel temp meter..

http://i23.photobucket.com/albums/b359/Overklokk/DSCN6142.jpg

[before]

New pics... :D Taken by Luigi; :)

Who's that guy? Looks like me :D
http://www.beforeoverclock.com/images/IMGP1503.jpg
http://www.beforeoverclock.com/images/IMGP1504.jpg
http://www.beforeoverclock.com/images/IMGP1507.jpg
http://www.beforeoverclock.com/images/IMGP1510.jpg
http://www.beforeoverclock.com/images/IMGP1511.jpg
http://www.beforeoverclock.com/images/IMGP1512.jpg
http://www.beforeoverclock.com/images/IMGP1513.jpg

Final temp :) (not -100, but close to... :rolleyes: )
http://www.beforeoverclock.com/images/IMGP1509.jpg

[Unseen]

Dual Head
Rotary Samsung Compressor 1hp
r507+r410
Eleven's evap cpu+gpu

http://img407.imageshack.us/img407/1130/dark19ki.jpg (http://imageshack.us)
http://img98.imageshack.us/img98/7717/dark25dv.jpg (http://imageshack.us)
http://img119.imageshack.us/img119/8427/dark46hi.jpg (http://imageshack.us)
http://img355.imageshack.us/img355/3921/enclosures9so.jpg (http://imageshack.us)
http://img77.imageshack.us/img77/1586/k37ev.jpg (http://imageshack.us)
http://img471.imageshack.us/img471/7492/k42fr.jpg (http://imageshack.us)
http://img297.imageshack.us/img297/7302/k10rc.jpg (http://imageshack.us)
http://img304.imageshack.us/img304/5449/k22sd.jpg (http://imageshack.us)

[Smy]

omg that is a very clean unit:slobber:

[Marvin]

Mine :
http://www.forumpcs.com.br/galeria/albums/userpics/10827/P1010044%7E1.JPG
http://www.forumpcs.com.br/galeria/albums/userpics/10827/P1010047.JPG
http://www.forumpcs.com.br/galeria/albums/userpics/10827/P1010041%7E1.JPG
http://www.forumpcs.com.br/galeria/albums/userpics/10827/P1010046%7E2.JPG

[LukeXE]

mine cascade

http://img85.imageshack.us/img85/369/cascade2tc.th.jpg (http://img85.imageshack.us/my.php?image=cascade2tc.jpg)

http://img495.imageshack.us/img495/3423/temp8ek.th.jpg (http://img495.imageshack.us/my.php?image=temp8ek.jpg)

[Big SturL]

This must be the nicest one I've ever seen:
http://www2.shrani.si/files/picture0339840.jpg

[LittleDevil]

Yes i like it too...:slobber: :slobber:

Here are some more pics...

http://phasechange.extremecooling.net/littledevil/production_line/1.jpg

http://phasechange.extremecooling.net/littledevil/production_line/2.jpg

http://phasechange.extremecooling.net/littledevil/single-stages/Picture%20004.jpg

http://phasechange.extremecooling.net/littledevil/single-stages/Picture%20005.jpg

tnx

[Big SturL]

Seriously LittleDevil, those look so professionally made. If you were to distribute them properly, Asetek VapoChill and Prometeia would've had some real competition on their hands.

[Aphex_Tom_9]

Seriously LittleDevil, those look so professionally made. If you were to distribute them properly, Asetek VapoChill and Prometeia would've had some real competition on their hands.
agreed, very very clean looking.

[Duniek]

http://img84.imageshack.us/img84/1393/fc14zz.th.jpg (http://img84.imageshack.us/my.php?image=fc14zz.jpg)
my ss

[DeMoN]

i've got a funny feeling he does lol

[Alec]

My Vapo PE :D

Idle Temps with no load:
http://www.subculture101.host366.com/pics/pc/P1010021.JPG

Preparation and insulation of mobo:
http://www.subculture101.host366.com/pics/pc/P1010022.JPG

Mounted evap:
http://www.subculture101.host366.com/pics/pc/P1010024.JPG

Running! :cool:
http://www.subculture101.host366.com/pics/pc/P1010023.JPG

[LittleDevil]

My horese... :toast: :banana:

http://phasechange.extremecooling.net/littledevil/production_line/13.jpg

tnx

[Skinny13]

how many cm is this lenght with the red line?


http://img174.imageshack.us/img174/8568/questcx9.jpg

[Brettbeck]

how many cm is this lenght with the red line?


http://img174.imageshack.us/img174/8568/questcx9.jpg

Probably about 50cm. Its the stainless steel hose under the insulation you pointed to. Its normally 50-60cm :).

[LittleDevil]

On that unit is 45cm.

thanks