My new WC Rig.. Let me know what you think!

[Blimpo555]

Here is my new watercooling rig.. hope you like it!
XP2600+ @ 2300Mhz @32C Idle and 35C Load
Asus A7N8X
Kingston HyperX PC3500 2x256
Geforce2 Pro (getting rid of it soon, which is why its not WCooled)
and now to the pics...

[Blimpo555]

another

[Blimpo555]

here is another of the top 120mm blowhole for the radiator

[Blimpo555]

and some stealthed cd-rom drives

[Blimpo555]

im the dark..

[Hardass]

Nice! How did you do the drives? I have the same case would like to do that.

[Blimpo555]

Well thats all.. Let me know what you guys think!
:toast:


Idle CPU Temp.

[Blimpo555]

Thanks Hardass..

To do the drive stealthing, I cut off the tabs on each side of the plates and then superglued a piece of card bard to the insed so it is all level. Then I used some velcro to stick it on. After I put it on and knew where the button was going to be, I marked it with a sharpie and then glued a small washer on the mark so when i push down on the corner of the plate, the drive opens. Let me know if you don't understand that so I can take some more pics showing you how it's done.

[Blimpo555]

this is what the cdrom looks like..

[Hardass]

Thanks I think I will give it a try.:)

[twiztdskatr]

damn, these water systems rock!

[Vectrex]

Have you put a sponge in the top of that reservoir yet? If not, your system is super bubbly, correct?

[TheDude]

Very sharp looking case! I really like that! :toast:

Hey Hardass,
To open those stealthed drives, you can also make shortcuts from them to your desktop..right click it and click eject. Or do both ways.:D

[N8]

Very nice! Stylish :D

[Hardass]

Originally posted by TheDude
Very sharp looking case! I really like that! :toast:

Hey Hardass,
To open those stealthed drives, you can also make shortcuts from them to your desktop..right click it and click eject. Or do both ways.:D
Thanks Bro. Will do both.;)

[Blimpo555]

Originally posted by Vectrex
Have you put a sponge in the top of that reservoir yet? If not, your system is super bubbly, correct?

Well, its not that bubbly. I don't have much water wetter in there as it is and was thinking about adding the foam piece but i can live with a couple bubbles in the reservoir.

[KnightElite]

Very nice looking setup, I'm impressed.

[LBJGH]

schweet!

[Marci]

If you've used the DangerDen Clearflex60 hose (which it looks like you have) that's why it looks foamy in the pix... UV lighting on that tubing has a fairly wierd effect... you lose all transparenct of the tube practically... tubing itself is excellent tho...

Mine looks the same...
http://www.over-clock.co.uk/marci/casemods/2003rigGallery/images/DSC00030.jpg (http://www.over-clock.co.uk/marci/) (best shot I have of the tubing with the lights on)

But guarantee the water is transparent without foam or bubbles in there...

[Marci]

Lights off...
http://www.over-clock.co.uk/marci/casemods/2003rigGallery/images/DSC00023.jpg

[Blimpo555]

Originally posted by Marci
If you've used the DangerDen Clearflex60 hose (which it looks like you have) that's why it looks foamy in the pix... UV lighting on that tubing has a fairly wierd effect... you lose all transparenct of the tube practically... tubing itself is excellent tho...
But guarantee the water is transparent without foam or bubbles in there...

Actually I'm using some Tygon tubing and it was pretty foamy but I just added some more distilled water and added the foam piece to the reservoir and now I can see right through the tubes.
I will take a pic. later on. I shouldn't have used that water wetter stuff. What coolant do you use Marci?

[Blimpo555]

Looks MUCH better.

[runmc]

Hey Blimpo,

Your case looks great, and the tubing is nice and clear.:rocker:

[twiztdskatr]

rock on dude!