X6800 @ 5040MHz

[Kinc]

Got a new bios from ASUS yesterday, tested it on my 3D disc and 450MHz + works fine. No multipier change yet though. This is with 1.73V and -125C ("coldbugs" @ -128C). Some 1M optimized runs coming today. Had a run at 461MHz FSB, 5073MHz (10.199s). But windows got corrupted so I couldn't save the screen shot.

http://www.kinc.se/5040.jpg

[igor0203]

:slobber: That's crazy!!!

[Extera]

Holy banana :banana:
Keep it comming! F5 F5 F5

[rustynator]

Holy Schnitzel!!! For goodness sake keep pushing that overclock and go single figures on the superPi 1M. Just incredible!!

[theteamaqua]

holy mother of crap!!! man thats sick !!!

anyway is it X6800 or just plain E6800, cos i dont see u have unlock multiplier?? maybe u didnt want to use it??

is that world record?? u beat TAM ??

[theteamaqua]

and also thanx for the cold bug temperture, that really helps, incase i buy a vapochill or some custom ss, but vapochill only do -50 c, so yeah i dont think ill every get to that temp. -128 !!

[Kinc]

holy mother of crap!!! man thats sick !!!

anyway is it X6800 or just plain E6800, cos i dont see u have unlock multiplier?? maybe u didnt want to use it??

is that world record?? u beat TAM ??

No it's a X6800 but the ASUS bios for P5W DH have a few bugs, you cant change higher then 11x for example. The latest bios I got has a bug where you have to reboot twice to set the vcore correct, else it will just reset to default.

TAM is at around 1.1xx if I remember correctly?

The ASUS board is slighty better then bad axe clock vs clock so with a spi optimized OS I think sub 10 is in reach. If I get a bios with 12x I'm pretty sure I could go higher then this. DFI Infinity board coming on monday.

[jrw]

:worship:

[theteamaqua]

sweeeet !!! well, good luck, i want to see single digit pi 1M :P

[rustynator]

My word I am dying to see these optimised runs......

[CornerJack]

Nice !!! :slobber:

[njkid32]

Kinc, did you try CPUID (http://crystalmark.info/download/index-e.html) most people are able to use multi's with that...

[Kinc]

Kinc, did you try CPUID (http://crystalmark.info/download/index-e.html) most people are able to use multi's with that...

Thank you, I will try that first thing.

[kiwi]

I think it is MB coldbug, does it show temps in bios? Maybe tcore mod would help

[MaSell]

Go for 9.999s :D

[5-Clicks]

The ASUS board is slighty better then bad axe clock vs clock so with a spi optimized OS I think sub 10 is in reach. If I get a bios with 12x I'm pretty sure I could go higher then this. DFI Infinity board coming on monday.
Man, I was almost hoping the BadAxe was as good as it was going to get...:stick: :banana: ;)

Looking forward to some DFI Infinity runs! I wonder if the P5W DH will overclock compared to the P5WD2-E Premium conroe revision.

Keep up the great work, Kinc! :woot:

BTW, what RAM are you running?

[SIOUX]

Nice work Kinc :toast:

[Johnny Bravo]

Excellent runs Kinc looking forward to the DFI runs, see if they've managed to overtake Asus on the Intel front...

[flexo_fk]

w00t!!!!!!!!!! thats just amazing , great work :worship:
kinc, can u post some pics of your setup, please?
anyway, good luck for 9.xxx run :up:

[Kinc]

BTW, what RAM are you running?

Corsair PC8000UL. Got new modules with D9 Fatbody from Gskill on the way here. I hope they will do the trick, since even at 2.8V my corsair wont do more then 440 3-3-2-2 (not o bad but I want better ;) ).

[before]

That's fast :D Can't wait to see the 10s barrier broken!

[S&M]

that's not fast .... that's SICK !

[Nosfer@tu]

Hard for me to do this to a sweed :) but for you ;) No problem

when will you do some live Oc next time? I will bring a few dudes here from DK if they want to come :)


:kissbutt: :kissbutt: :kissbutt: :bows: :bows: :bows: :kissbutt: :kissbutt: :kissbutt:

[Kinc]

Hard for me to do this to a sweed :) but for you ;) No problem

when will you do some live Oc next time? I will bring a few dudes here from DK if they want to come :)


:kissbutt: :kissbutt: :kissbutt: :bows: :bows: :bows: :kissbutt: :kissbutt: :kissbutt:

Dreamhack Winter 2006 in november, I think that will be the biggest live event so far :)

[nike]

O M G O_O holy :banana::banana::banana::banana: very impressive kinc

[GusC]

:slobber: Me wants one of them, good work.

[Supertim0r]

really nice score, is that a WR ?
stepping 5 is great :D

[eva2000]

No it's a X6800 but the ASUS bios for P5W DH have a few bugs, you cant change higher then 11x for example. The latest bios I got has a bug where you have to reboot twice to set the vcore correct, else it will just reset to default.

TAM is at around 1.1xx if I remember correctly?

The ASUS board is slighty better then bad axe clock vs clock so with a spi optimized OS I think sub 10 is in reach. If I get a bios with 12x I'm pretty sure I could go higher then this. DFI Infinity board coming on monday.
awesome clocks there mate... P5W DH arrives in OZ in 1st week of July so hopefully Asus have it all sorted out in the next 2 weeks

Thanks for all the hard work beta testing that board for us hehe

[lowfat]

can't wait to see some benches.

[MnM]

Nice job. Do you see the core voltage dropping a lot?

[Cornelious0_0]

Very nice to see you on the forfront of things again Kinc...can't wait to see if you get your hands on a better BIOS soon.

[Marioace]

jejejeje congrats bro

keep pushing it up higher

and ur E6600?

[ODIO]

look like...FAST!!!!
gj Kinc

[kszonek]

I'm waiting for 9.999 :D

[vanquish]

Awesome stuff Kinc !

All the best for single figures :D

[Durzel]

Wow.

Tried disabling one of the cores? Might be able to squeeze enough Mhz out of it to get SuperPI under 10 secs. :D

[rra]

:eek: I feel a sub 10 comming :eek:
I just sold my FX60 after reading this dont feel so bad :rolleyes:
Kinc great clocking ..;) so close its goot to hurt ..:D

[theteamaqua]

if u were playing counterstrike, u get a "wicked siiiiiiiiiick !!!!!!!!!!"

[guess2098]

nice..........
9.9999999999999 is ganna be here soon

[//mAr]

Got a new bios from ASUS yesterday, tested it on my 3D disc and 450MHz + works fine. No multipier change yet though. This is with 1.73V and -125C ("coldbugs" @ -128C). Some 1M optimized runs coming today. Had a run at 461MHz FSB, 5073MHz (10.199s). But windows got corrupted so I couldn't save the screen shot.

[IMG]http://www.kinc.se/5040.jpg]
can you share the new bios? or are you talking about the 0504 bios ?

[gianni-gt]

not the superpi WR but you have the X6800 OC-record ;)

[Kain XS]

Great Overclock there.

Do you have a CPU-Z validation?
Or maybe a CPUID shot.

[`odin]

Maurice green times soon ;)

[Entity_Of_One]

Very well done Kinc, break under that 10s 1M! I was thinking TAM was going to be the first to do it, but it looks like you could easily make a run for it. Sooo close, and grats on the WR OC for X6800. ;)

[thunderstruck!]

Don't forget 32M too:)

[trackdude]

Maurice green times soon ;)
<--- see the username... I've been more hyped for the spi wr to eclipse the 100m wr more than a 9.xxx

[massman]

single digit spi1M is getting very close :)

[hipro5]

Welcome back Kinc.......:D :toast:

[corvus_corax]

Great as always Kinc :slobber:

Corsair PC8000UL. Got new modules with D9 Fatbody from Gskill on the way here. I hope they will do the trick, since even at 2.8V my corsair wont do more then 440 3-3-2-2 (not o bad but I want better ;) ).
Nice memory you got it i think, i didn't know that G.Skill was using Fattys.

[whoodiestyle]

:clap: :woot: :clap:

[_Eduard_]

:eek: :banana: :clap: :rehab:

:cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer:

[SoF]

omg a question of hours, I can hear the single digit scream :woot:
*subscribe*
great work until now, can't wait for more :slobber:

[G H Z]

Good job kinc, thats a very fast setup. How exactly is the cold bug presenting itself?

[melocot]

Congrats Kinc, do u have any mods in the mobo?

I hope your new results with the Infinity 975x.

[Vice]

What i would give to have that cpu right now... wow. Impressive.

[althes]

hope he breaks it in a few hours

[alexio]

Go for it ;)

[Punisher!]

Unbelievable!

[qdemn7]

Abso-freaking-lute-unf***ing-ly unbelievable! :eek2:

[BlackX]

awesome :woot:
can u go higher?
waiting for more benchies :toast:

[Punisher!]

Abso-freaking-lute-unf***ing-ly unbelievable! :eek2:

:rotfl: ...

[Hyperr]

Waiting for 9.xxx! :toast: :clap:

[M1ke]

:toast: :slobber: :slobber: :slobber:
i need this CPU:slobber: :slobber:

[MasterOfTheReal]

Subscribed!

[VictorWang]

very very nice knic, congratz and we are waiting for ur XS 3D results with this cpu :D:D

[5-Clicks]

G.Skill D9 fatty? Is this a new limited edition line they're planning on releasing, or are these just some modules they had from Micron to test and they're giving them to you?

Wow 2.8v and not even DDR900. Did you try raising the CAS to 4? Mushkin had awesome D9 fatty modules and somebody had 1120 4-2-2-4 on his kit (I forget who it was).

[404Power]

9.999s :clap: :clap: :clap: 9.999s :clap: :clap: :clap: ......
Seriously .... FU**ING NICE WORK !!! :eek:
Go for it! :woot:

[Kinc]

The motherboard is DEAD, died on air just after installing win2003. I don't have any Bad Axe here so I will have to wait for the DFI Infinity board.

[Dynasty]

The motherboard is DEAD, died on air just after installing win2003. I don't have any Bad Axe here so I will have to wait for the DFI Infinity board.

Your X68 5 ok ? :confused:

[arisythila]

Crap Intel boards.... :-p

[Dynasty]

Crap Intel boards.... :-p

I am almost sure he is on the Asus P5W-DH ....:)

[rra]

Bad luck there Kinc but I dont think thats first board to let go under pressure.Hope DFI arrives soon;)

[Kinc]

I am almost sure he is on the Asus P5W-DH ....:)

Correct. It has been buggy from time to time. I think it may be a corrupt bios. The new bios I did some strange things ang would reset the vcore or the complete bios. Will try to hotflash the bios maybe.

[vapb400]

Sorry to hear about the board. I can't wait to see some DFI Infinity action.

You should look into disk imaging. I am working on DVDs with complete benching Windows setups for W2K/XP/2003. Once i finish them I will be able to clone them to the hard drive in <5 minutes, no long windows install necessary ;)

[TheMeatFrog]

I would like more info on these G.Skill D9 fattys too ;)

[sierra_bound]

He may have misspoke. Micron no longer produces Fat Body chips, i.e. D9DQT and D9DQW. Perhaps he's talking about older model G.Skill.

D9 and Fat Body are not necessarily one and the same thing. D9 in and of itself has little meaning. It's just Micron's code for DDR2.

Sorry to hear about your board, Kinc.

[5-Clicks]

He may have misspoke. Micron no longer produces Fat Body chips, i.e. D9DQT and D9DQW. Perhaps he's talking about older model G.Skill.

D9 and Fat Body are not necessarily one and the same thing. D9 in and of itself has little meaning. It's just Micron's code for DDR2.

Sorry to hear about your board, Kinc.
Yes, I realize that D9 fatties aren't made anymore and D9 is Micron's simple term, but it is possible that G.Skill got ahold of some D9 fatties before Micron discontinued them and G.Skill decided to hold them back from release due to lack of future supply.

I too am sorry about the board, Kinc. What caused the board to die, do you know?

[matt89]

under 10s here we come

[***Deimos***]

I'm confused.
So, did any0ne manage to change multiplier with CPUID?

The special BIOS that lets you go past 450 fsb that you got from ASUS was obviously only for the P5W.. If you go with DFI Infinity wont you be back to the 450fsb limit?

[Kinc]

I'm confused.
So, did any0ne manage to change multiplier with CPUID?

The special BIOS that lets you go past 450 fsb that you got from ASUS was obviously only for the P5W.. If you go with DFI Infinity wont you be back to the 450fsb limit?

The DFI Ininity board has a range up to 533MHz FSB and the multiplier should work correct on that board. The default voltge support for memory, chipset and cpu is also really good. The benching will be on halt for a few days until the DFi board gets here. Stay tuned :)

[Marioace]

so sad buddy.

hope the DFI arrives soon and ur connies will run faster than now.

[Asazman]

dayam :drool:

[robberbaron]

He may have misspoke. Micron no longer produces Fat Body chips, i.e. D9DQT and D9DQW. Perhaps he's talking about older model G.Skill.

D9 and Fat Body are not necessarily one and the same thing. D9 in and of itself has little meaning. It's just Micron's code for DDR2.

Sorry to hear about your board, Kinc.

I've seen D9 codes on DDR1 sodimms. It's not DDR2 specific.

[freecableguy]

Kinc, you have skype? PM me your info....

[SBB><Kfly3r]

This is cray, nice work...I can't wait to get one of those CPU's.

Hey think you could take a pic of your set up?

[iguanodon]

awesome !
Congrats

[TheMeatFrog]

Kinc did your DFI arrive today?

[thorgal]

You clearly deserve that legend branding :eek: :toast:

Can't wait for your next run on the DFI. I'm still in doubt between the Asus, the DFI and the Intel.

[tvdang7]

nice overclock.

[Formann]

CB @ -128c ... suspiciuos.

128*2 = 256 ..

I bet its got CB at +128c also .. care to try? :D


GREAT score btw .. some minor tweaks and getting multis to work might be enough.

:toast:

[alexio]

CB @ -128c ... suspiciuos.

128*2 = 256 ..

I bet its got CB at +128c also .. care to try? :D

My thoughts exactly....

Btw: is the thermal shutdown/throttling sequence housed in the CPU, like it is with AMD? It most likely is. But if the signal comes from the motherboard it might be possible to isolate the pin responcable for carying the signal. Someone need sto take a look at the pin-out of Conroe at intel.com (if it is present already).

The sequency is probably started in the CPU, so this piece of information is 90% useless........

[vapb400]

CB @ -128c ... suspiciuos.

128*2 = 256 ..

I bet its got CB at +128c also .. care to try? :D


GREAT score btw .. some minor tweaks and getting multis to work might be enough.

:toast:
sorry i am missing it, what is the significance of 256?

[zub]

:banana::banana::banana::banana: me! :eek:

[realsmasher]

128 and 256 are "straight" numbers

(i hope this is the right word in english, as i dont really now)

....but maybe i got it wrong.

[alexio]

sorry i am missing it, what is the significance of 256?

The tempsensor can only sensor a range of 256 numbers. Often -128 to +128 is choosen as a range ;) Anything below or above these numbers will give stange values that can cause the system to shut down (below -128 could be read as +128 for example, and the thermal protection will kick in).

[Sampsa]

Nice results my swedish friend :toast:

I have X6800 and E6700 CPUs, Intel 975X (rev 304) and ASUS P5W HD Deluxe motherboards and pair of Corsair 6400C3 and 5400UL memory here waiting for LN2 and dry ice coming later this week. Lets see if I can hit 5 GHz :)

[nvSasAk67]

Who ever takes the 5ghz out it will be massive.
Gonna bookmark this thread.*cough* go finland!Nice job kinc.

[m0da]

I have X6800 and E6700 CPUs, Intel 975X (rev 304) and ASUS P5W HD Deluxe motherboards and pair of Corsair 6400C3 and 5400UL memory here waiting for LN2 and dry ice coming later this week. Lets see if I can hit 5 GHz :)

hope you have fun ;) with that :banana:

[Kinc]

Got a new ASUS today. Will run some more spi 1M today :)

[Punisher!]

Got a new ASUS today. Will run some more spi 1M today :)
Keep us in touch but please... show also some Sandra BW...

[Sampsa]

Is there working Clockgen for P5W DH Deluxe? Abo's SetFSB for P5WD2 Ultra Version 1.5a2 works fine but it's slider goes only to 410 MHz :|

[***Deimos***]

sorry i am missing it, what is the significance of 256?
8bit signed int goes from -128 to +127 if I recall.. but, that still doesn't explain the shutdown at <(-125c). Internally, the thermal diode has no idea what -128 is, and some gain and offset are used to calibrate and measure the actual temperature..

Any thoughts Alexio?


Is there working Clockgen for P5W DH Deluxe? Abo's SetFSB for P5WD2 Ultra Version 1.5a2 works fine but it's slider goes only to 410 MHz :|

You know you belong at xtremesystems when you keep running out of room on the sliders ;)

[crotale]

Is there working Clockgen for P5W DH Deluxe? Abo's SetFSB for P5WD2 Ultra Version 1.5a2 works fine but it's slider goes only to 410 MHz :|
AFAIK, that program uses ICS954123 and ICS954557.
Maybe it's possible to try to chose one of them in the latest ClockGen and see it if works.

[Kinc]

ICS954123 works s kinda. It will set FSB in a 33MHz interval. But you have to try where you wanna put the slider since it sets the FSB pretty much randomly. But then I havent tried it that much, could work if you know where to put it. With 0504 or the latest beta I find it easy to boot at the desired FSB. I have to run at 1.78Vcore to be able to run 460MHz, 458MHz works at 1.73V. Kinda scared of going over 1.8V since I got less fsb oc any higher then 1.78V. When pushing the FSB this high memory oc/perf takes a seriuos beating also.

When ideling in windows -125C is the limit, colder then that the system will hang or shut down.

Need to be able to use the 12x for a shot at sub 10s.

[sierra_bound]

I discovered same thing about ICS954123 and Asus board. I also tried other PLL's, but got even stranger readings. SetFSB for P5WD2 Ultra Version 1.5a2 works, but only up to 410MHz. I noticed none of kyosen's screens show Clockgen, so maybe he's using something else. I'll have to ask him. I think it's just easier to set FSB in BIOS and pray that it will boot into Windows at the speed you want.

[morgado]

ICS954123 works s kinda. It will set FSB in a 33MHz interval. But you have to try where you wanna put the slider since it sets the FSB pretty much randomly. But then I havent tried it that much, could work if you know where to put it. With 0504 or the latest beta I find it easy to boot at the desired FSB. I have to run at 1.78Vcore to be able to run 460MHz, 458MHz works at 1.73V. Kinda scared of going over 1.8V since I got less fsb oc any higher then 1.78V. When pushing the FSB this high memory oc/perf takes a seriuos beating also.

When ideling in windows -125C is the limit, colder then that the system will hang or shut down.

Need to be able to use the 12x for a shot at sub 10s.



hi kinc you have pm

[Sampsa]

AFAIK, that program uses ICS954123 and ICS954557.
Maybe it's possible to try to chose one of them in the latest ClockGen and see it if works.

Clockgen with ICS954123 works but not very well.. just like Kinc described it jumps like 33 MHz. I emailed to SetFSB's author Abo and asked a new version with more headroom for P5W-DH Deluxe.

[Nosfer@tu]

Clockgen with ICS954123 works but not very well.. just like Kinc described it jumps like 33 MHz. I emailed to SetFSB's author Abo and asked a new version with more headroom for P5W-DH Deluxe.

I still dont know what mobo to throw my E6600 in and kick that LS on top :(

I hear that Bad axe is 3D stabel at 445 fsb as max.

Would like the Asus P5W-DH Delux 2, but would perfere the DFI, But they somtimes have problems with specific memmory Im told?

Anybody care to coment on that?

[Sampsa]

ICS954123 works s kinda. It will set FSB in a 33MHz interval. But you have to try where you wanna put the slider since it sets the FSB pretty much randomly. But then I havent tried it that much, could work if you know where to put it. With 0504 or the latest beta I find it easy to boot at the desired FSB. I have to run at 1.78Vcore to be able to run 460MHz, 458MHz works at 1.73V. Kinda scared of going over 1.8V since I got less fsb oc any higher then 1.78V. When pushing the FSB this high memory oc/perf takes a seriuos beating also.

When ideling in windows -125C is the limit, colder then that the system will hang or shut down.

Need to be able to use the 12x for a shot at sub 10s.

Ok, I need to try adjust FSB from BIOS then with P5W-DH Deluxe. 410 MHz FSB works fine 1:1 with 5400UL (4-3-2-8) without any modifications. Tomorrow I'll add Vcore, Vmem and VMCH mods and see how it turns out first with dry ice and then with LN2.

I also have Intel 975X (rev 304) motherboard here which has higher multipliers open. I already did Vmem-mod today to it but then started playing with P5W-DH Deluxe. I'll try it later.

[aintz]

o my thats some crazy cpu

[Kinc]

Ok, I need to try adjust FSB from BIOS then with P5W-DH Deluxe. 410 MHz FSB works fine 1:1 with 5400UL (4-3-2-8) without any modifications. Tomorrow I'll add Vcore, Vmem and VMCH mods and see how it turns out first with dry ice and then with LN2.

I also have Intel 975X (rev 304) motherboard here which has higher multipliers open. I already did Vmem-mod today to it but then started playing with P5W-DH Deluxe. I'll try it later.

You need 1.72Vmch or more to run higher then 408-410MHz. Vmem mod to 2.8V to those fattys will do alot for the mem oc, especially with high fsb.

Also for 3D I think that the ASUS board is a given before Bad Axe, better room for cooling and higher pciex clock is really important for that little extra.

[Sampsa]

333 MHz is the max FSB I can set from BIOS, after that system won't even post. With SetFSB everything works great up to 410 MHz. Maybe a strap-option or something but 0078 BIOS doesn't have any options for that?

[dpa]

do you have to boot up @ 266Mhz to get setfsb to work to 410Mhz..?

Iam currently using bios 0065, you guys use 0078..? any changes, where to download?

[Sampsa]

do you have to boot up @ 266Mhz to get setfsb to work to 410Mhz..?


It doesn't matter if I boot 266 - 333 MHz.. I can set FSB to 410 MHz from Windows. Above 333 MHz doesn't even post.

[dpa]

update:

the new bios 0078 works great here, post @ 419 without problems at all.. Tower 120 cooling.

my ram is holding me back I think..

[Kinc]

Ive posted @ 462MHz FSB (462x11=5082) with. It boots in to windows but spi hangs at the 4th loop every singel time. I'm allready at such a high voltages that i dare not go any higher. That's not my style but Intel will order a job and make me sleap with the fishes if I kill this chip ;)

@ Sampsa: Did you you hear from the author of set fsb?

Update: ASUS is working on another version of the bios. This time they will have the right microcode for b1, stepping 5 X6800 so we will be able to use the unlocked multis over 11x.

[Sampsa]

@ Sampsa: Did you you hear from the author of set fsb?


Check PM

[Sampsa]

First run with dry ice and LN2. Not too good contact between container and CPU, also didn't have any insulation.

http://www.muropaketti.com/sampsa/x6800/04.jpg

Dry Ice: Spi1m 11,313s with X6800 @ 4503 MHz (http://www.muropaketti.com/sampsa/x6800/spi1m_4503.png)
LN2: Spi1m 10,828s with X6800 @ 4754 MHz (http://www.muropaketti.com/sampsa/x6800/spi1m_4754.png)

More later

[Nosfer@tu]

First run with dry ice and LN2. Not too good contact between container and CPU, also didn't have any insulation.

http://www.muropaketti.com/sampsa/x6800/04.jpg

Dry Ice: Spi1m 11,313s with X6800 @ 4503 MHz (http://www.muropaketti.com/sampsa/x6800/spi1m_4503.png)
LN2: Spi1m 10,828s with X6800 @ 4754 MHz (http://www.muropaketti.com/sampsa/x6800/spi1m_4754.png)

More later

Where is your Pots? Sold em?

[Sampsa]

2nd test. This time with P5W-DH Deluxe:

http://www.muropaketti.com/sampsa/x6800/spi1m_4783.png

[thorgal]

2nd test. This time with P5W-DH Deluxe:

http://www.muropaketti.com/sampsa/x6800/spi1m_4783.png


Nice :toast:

Is your X6800 fully unlocked or only 6-12 as is displayed on the screenshot of cpu-z ?

[Nosfer@tu]

2nd test. This time with P5W-DH Deluxe:


So 2 fsb higher with the Asus board?

What board do you like the moste Sampsa?

[Sampsa]

So 2 fsb higher with the Asus board?

What board do you like the moste Sampsa?

I like both boards although both of them needs to be modified to get enough voltages. Intel's own D975XBX appears to show memory bus incorrect when using 1333 FSB setting...

I think my X6800 sample isn't very good since I'm not getting even near 5 GHz with LN2 and 1,72V.. or maybe it's just me ;)

[|-jokker-|]

I think my X6800 sample isn't very good since I'm not getting even near 5 GHz with LN2 and 1,72V.. or maybe it's just me ;)

I have a feeling that the problem is not on the user :)
Your chip may not be the most powerfull one , but no big deal get a diferent one and try again :)
For 3d benching what is the best board for you ? Sampsa

[tifius]

heja Kincen du är bäst! du är den som klockar mest! heja ! heja ! heja !
that basically means that Kinc rocks. really hard!

[Kin Hell]

heja Kincen du är bäst! du är den som klockar mest! heja ! heja ! heja !
that basically means that Kinc rocks. really hard!

Not entirely sure your Transalation of "bäst" is included! :D

[foxprodb]

so nice~

[aintz]

holy jesus man. wow5ghz wow

[Nosfer@tu]

I like both boards although both of them needs to be modified to get enough voltages. Intel's own D975XBX appears to show memory bus incorrect when using 1333 FSB setting...

I think my X6800 sample isn't very good since I'm not getting even near 5 GHz with LN2 and 1,72V.. or maybe it's just me ;)

Cool, Thx a lot for taking your time to answer :)

Some users on the fora Claims that we should wait for Foxcoon´s version :)
Personaly I dont se any performanc jump on the DFI´s verison.
Better voltage options and so but no records..

[hipogtr]

Sweet numbers - keep it up!

[The Mutt]

DFI's Lanparty version should kick ass with more voltage settings and so on. And Kinc really do rock :D