MAX. mhz for CORSAIR CMX512-3000C2 ?

[WarDodo]

greetings.

I wonder if anyone has experience with this particular ram. It's said to go past the 204mhz.

I was only able to hit the specified 186mhz before my a7n8x limited me.. (crapping out at higher FSBs.. I have to cut the L12 bridge on my 2700+ to get higher). but before I raise the knife on my CPU I'd like to know what the ram is capable of.

how far could you push it ?

[hipro5]

On a P4 , it did 243MHz(486MHz DDR) with Cas 2-3-3-7 and 3.2Vmem.....It could do 204MHz(408MHz DDR) at Cas 2-2-2-7 and 3.1Vmem.....

[Stepper]

U need a ton of voltage to get that module to clock...

[WarDodo]

huh? 243 - in words - twohundredandfourtythree megahertz ?!
I thought that was only possible with the PC3500?! I'll eat a tree if my 3000 goes anywhere near that (in case the hardware survived the necessary Vmod.. I got two left hands).

[twiggy]

"eat a tree" I'd love to see that. ;)

I got some in a kx7 204 @ 5-2-2-2 with 3.2v.

[hipro5]

Originally posted by WarDodo
huh? 243 - in words - twohundredandfourtythree megahertz ?!
I thought that was only possible with the PC3500?! I'll eat a tree if my 3000 goes anywhere near that (in case the hardware survived the necessary Vmod.. I got two left hands).



:D :D

This is a 256Mb Kingston Value Ram DDR333(PC2700) at CAs 2-2-3-7 and with 3.5Vmem.......he,he,he......It did 267MHz(534MHz DDR) at 3.58Vmem.....

[WarDodo]

*stares at hipro5's specs in total disbelief* :slobber:


dunno what to say... *blank stare*

[AndrOvr]

dAMN... I most had luck..
I have mine runing on a BD7 II @ 210 cas 2.5 6 2 2 enh on w ONLY 2.65v.
Hmm... I wonder how far would it go w more volt. like 3.1v more more :D
heheee

[WarDodo]

ok. If I can't get past the 200mhz mark after cutting the L12 bridge I'll turn off the machine and visit my girlfriend.. rofl

[kchip]

Ive run up to 217 FSB CAS2 , 2, 6 , 2, T2 @ 3.1 v

Its rev 2.1 Winbond stuff. I had to RMA mt rev 1.1 to get it.

[bigjohns97]

Originally posted by hipro5
:D :D

This is a 256Mb Kingston Value Ram DDR333(PC2700) at CAs 2-2-3-7 and with 3.5Vmem.......he,he,he......It did 267MHz(534MHz DDR) at 3.58Vmem.....

hipro why don't you put that stick in your granite bay rig and try for 1ghz bus

[WarDodo]

ROFL. ;)

I hope It will do 200mhz for me. that's all I want. :p

[twiztdskatr]

my XMS3500 does 400Mhz @ 2-2-2-4 @ 2.78Vdimm

[DriveEuro]

i had a stick of 512 CMS PC3200 doing 212 4-2-2-2.... Haven't tried these 2x256 yet.

[Fewture]

My XMS512 stick does:
- 225MHz fastest timings (1T) on my 8K9A 3,2V
- 230MHz fastest timings (2T) on my 8K9A 3,2V
- 230Mhz 6-3-3-2 on an 8RDA+ 2,9V (I think.. board wasn't mine and can't remember the timings. Wasn't fast timings anyway)

225MHz 1T Epox 8K9A
http://www.fewture.cistron.nl/img/225MhzT1.JPG

230MHz 2T
http://www.fewture.cistron.nl/img/230mem.JPG

[hipro5]

Originally posted by bigjohns97
hipro why don't you put that stick in your granite bay rig and try for 1ghz bus

Cos ,first, GB Mobos don't have multipliers for the CPU and Mem.....Only 1:1.......and ,second,I have to find a CPU that can Climb so high...... ;) :D

[hipro5]

Here's my LAST one screen shot with Single DDR Mobos......

[althes]

amazing:slobber: :slobber: :slobber: