nemo goes intel ..... choices, plz help

[i found nemo]

well, i need a mobo that has an agp slot, no exceptions.
i need a mobo that has a good track record without alot of modding.
i need a pentium m (dothan?). i have 2 fx series tccd
need a mobo that supports ddr1
and last but not least......... i need a kick ass powersupply

budget is gunna be around ....350? or should i up that? i don't want to spend what i don't need to. also a garunteed clocker would be gr8, and i'd be intrested. so if you wanna sell, pm me, got an adapter for pentium m? wanna sell it? pm me power supply and mobo too just pm me

http://www.newegg.com/Product/Product.asp?Item=N82E16813131484R
mobo

http://www.newegg.com/Product/Product.asp?Item=N82E16817103213
psu

http://www.pagecomputers.com/store/product.asp?catalog%5Fname=Motherboards&category%5Fname=16g16c262s1370&product%5Fid=767889
adapter

http://www.ewiz.com/detail.php?name=MPM-730JBX
cpu

http://www.newegg.com/Product/Product.asp?Item=N82E16835118119
cpu cooler

total ~385 ... not too bad eh?

[freecableguy]

$350 sounds about right for the kick-ass PSU. :D

[i found nemo]

lol i meant for the whole thing .... any tips? i read alot about bios flashing ... no floppy :( gotta get one .... i'm getting the p4p800se .... good choice? also i seen a celly 370 for a decent price




so.... if anything is off let me know, also i need a good air cooler ... suggestions?

btw, where can i get a ct-479 adapter

[Vric]

Don't know about the P4P800-e Deluxe, but the P4P800 Deluxe isn't very overclocker friendly. (mine hit a fsb wall at 227Mhz)

Also the -e seem to have the same bug as the non -e with the NIC.. might need a PCI NIC for connexion stability.

[i found nemo]

i have a seperate ethernet card, no prob. also have a seperate audio card if it comes down to it .....

[Levish]

i've got this psu for my 2nd rig

http://www.newegg.com/Product/Product.asp?Item=N82E16817101520
cheaper and more amps on the 12v line

[i found nemo]

p4p800se comes in open box for 67 bux, what does open box mean? i have ide cords sata cords .... don't plan on using a case .. so would it be better, i mean it is over a 20 dollar deduction from final price....

[bikester1986]

i have the p4p800 se and it works really well cpu voltage flucs. a little but its really easy to overclock

[cupholder2.0]

Built my friends comp with this board. It OCs pretty well. His 3.2E does 3.9 on stock air cooling. Muskin Value ram.

[i found nemo]

well, thank you two very much for ur input....


also, does anyone know where i can get an adapter?

also which core? sonoma?? dothan?? banias?? which clocks the best? and where can i get a decent 1.5-1.8ghz modle??? pentium would be fine, but too much money.... so how much for the celly's?

also i was gunna get a celly with 100fsb but i hear that they clock like crap ... i'm hoping to top 2.6 because i want to have atleast that because that is what my last setup was....thanx


isn't sonoma the newer core for a different platform?

also, i read that celly's have boot issues with certain fsb's. also, i want to utilize my tccd ram, and i don't see that happening at 175 mhz, is there a way for me to " up clock " the ram like on a64's? if i get it to work at 175, the series processor i selected has a multi of 15 i belive, yes it is 2.6ghz like i wanted. but don't the ag/pci settings get screwed up? so should i get one with a lower multi so i can get the clocks to lock on agp/pci? what modle is the cpu with 13 multi? that way at 200 everything is safe AND i still have the desired 2600 mhz. but still, ram, how do i upclock it?

[i found nemo]

also, what cooler? should i just put a weight on my a64 freezer? lol budget moved to 370 to accomidate for atleast a decent 20-30$ cooler

[jrw]

+1 P4P800SE.

Good luck running TCCD on 865 though... (get some oldschool BH5 and a booster).

[i found nemo]

well, what are the issues? just cuz timing?

[DaWaN]

Don't buy a celeron M, they will get stuck at about 170mhz FSB. Also it's an old platform now.

[i found nemo]

ok let's make this simple ....... celeron m is faster clock for clock than a64. i should hit about 2600mhz with the celeron. my a64 was 2600mhz. celeron will be faster. don't care how old it is, it's cheap powerful and will work. unless you have a pentium m that you would like to sell for 100 bux?

how about a 725 then???

[rozzyroz]

the dothan core is what you want. i have a 730m (1.6ghz) that does 2.4 on stock volts using the p4p800se. 730 or 740 would be the best priced dothans.

here's a place thats ells the adpater for $39 www.pagecomputers.com (http://www.pagecomputers.com/store/product.asp?catalog%5Fname=Motherboards&category%5Fname=16g16c262s1370&product%5Fid=767889)

[i found nemo]

thanx rozzy, well i found a pentium m 735, it's not the 133fsb series but it's still a pentium .... so which is better a 735 or a 370 for over clocking

how about a 410? those have 133fsb, as seen here
http://www.pagecomputers.com/store/product.asp?catalog%5Fname=Processors&category%5Fname=24g24c151s698&product%5Fid=1067803

89 bux though ... but still it's got higher fsb

110 bux for a 1.6ghz

http://www.pagecomputers.com/store/product.asp?catalog%5Fname=Processors&category%5Fname=24g24c151s698&product%5Fid=1055781

http://www.intel.com/support/processors/mobile/cm/sb/cs-008029.htm

omg, intel says it's 65nm process ..... so it should o/c even better right?

[Hyperr]

I've a p4p800 and it works really well... An example:

http://img144.imageshack.us/img144/2530/39s34hg.jpg

[i found nemo]

yea, looks like it can take a beating :D but i'm wondering about those 410 and 420 chips ... those aren't extra low voltage are they? cuz asus don't support those according to the ct-479 booklet


410 and 420 chips are yonah? starting to seem that way ..... can someone plz verify?

screw it, 380j or 360j?

http://www.ecost.com/ecost/shop/detail.asp?dpno=689031

http://www.ecost.com/ecost/shop/detail.asp?dpno=579026

same prices almost

nope 730j here i come

http://www.ewiz.com/detail.php?name=MPM-730J

[i found nemo]

what the **** did i post in the wrong portion of the intel section or what?

[DaWaN]

yea, looks like it can take a beating :D but i'm wondering about those 410 and 420 chips ... those aren't extra low voltage are they? cuz asus don't support those according to the ct-479 booklet


410 and 420 chips are yonah? starting to seem that way ..... can someone plz verify?

screw it, 380j or 360j?

http://www.ecost.com/ecost/shop/detail.asp?dpno=689031

http://www.ecost.com/ecost/shop/detail.asp?dpno=579026

same prices almost

nope 730j here i come

http://www.ewiz.com/detail.php?name=MPM-730J

Celeron 4xx is yonah and socket 480, you can't use them in the CT-479, i would take the 730 indeed.

[couppi]

Why not use ebay?

Here's a 750 for like $80:
http://cgi.ebay.com/Intel-Pentium-M-750-1-86-1-86Ghz-533-2M-L2-Centrino-CPU_W0QQitemZ6887004089QQcategoryZ99251QQssPageNam eZWDVWQQrdZ1QQcmdZViewItem

[StealthyFish]

i'm not sure if you guys are aware of this, but both the Celeron M and the Pentium M are socket 479, not socket 478. Same amount of pins but different pin assignments. you won't be able to run that processor on a socket 478 board. It wouldn't be compatible. the only ones newegg sells are for pretty expensive.

http://www.newegg.com/Product/ProductList.asp?N=2010200280+1070513560&Submit=ENE&SubCategory=280

these boards. the cheapest one is 145. Maybe I read this wrong, but Core Duo, Pentium M, and Celeron M are all socket 479, not 478.

[SepheronX]

thats the whole point of hte adapter, to put it on that mobo.

[perry_78]

Thats why we use adapters ;)

[i found nemo]

well i guess i'll be getting a 730 that other cpu on e-bay = now gone

yea, figured the 4xx series was not for my board :( i would have found out quicker but assistance around this place is slower than hell, even with 500+ views on this thread, i still don't even have 30 comments