G.SKILL F2-9600CL5D-4GBPI Sample testing

[Jor3lBR]

WaterFlex
Yes, but not 2х2gg microns, and the PSC is much colder with these chips G. SKILL far ahead.

Yes to run 4gigas of Micro D9 at that speed is much harder and involved lots of time tweaking fine-delays and more vdimm etc to get it right.

That's why I sold them to get these...

[neo mike]

anybody know anywhere else to get this memory besides memoryc.com ? and newegg, seems everybody is sold out, and no idea when they will get more.

[Jor3lBR]

anybody know anywhere else to get this memory besides memoryc.com ? and newegg, seems everybody is sold out, and no idea when they will get more.

I got mine from Canadian's ncix.com they had 2 kits left for USD 280 each on Sunday.

[neo mike]

what would you say is the max you can run this kit 24/7 ? do you guys think this is the best 4gb kit for ddr-2, everybody is out of this stuff, g.skill needs to make this more available.

[Jor3lBR]

what would you say is the max you can run this kit 24/7 ? do you guys think this is the best 4gb kit for ddr-2, everybody is out of this stuff, g.skill needs to make this more available.

Runs 1200Mz stable with 1.75vdimm and 1300Mhz with a little more what else can you ask for (voltages on DFI LP X48)?

Never seen 4Gb kits run like that with so little voltages! These are thabomb and I don't work for G.Skill...

[high-gertz]

Jor3lBR

I have even better, 1272Mz stable with 1.71vdimm



Neo Mike

Leaf page back, everything is explained.

[Jor3lBR]

Jor3lBR

I have even better, 1272Mz stable with 1.71vdimm



Neo Mike

Leaf page back, everything is explained.

Yes they can get lower the problem is my build is not mounted yet so I only tested in auto settings and in only 3 runs without any tweaking

Nice results.

[neo mike]

1275 stable is good for me, now if i can just get my hands on a kit i will be set, this stuff isnt easy to get, newegg is exspecting more on 10/17, thanks for the help and information guys.

[zsamz_]

1275 stable is good for me, now if i can just get my hands on a kit i will be set, this stuff isnt easy to get, newegg is exspecting more on 10/17, thanks for the help and information guys.

it also depends on what board you gonna use i doubt p35 gonna get them sticks past 1270 stable

[neo mike]

I have a p45 board.

[zsamz_]

so far i only seen dfi x38-x48 clock these sticks @ high mhz
those boards are tuned to clock 2x2
my ut p35 clocks memory higher than my x38 but only 2x1
4x1 n 2x2 x38-48 does it better

[neo mike]

I tried 4+1 memory in my board wouldnt even post, i will have to give it a shot and see what happens.

[high-gertz]

Guys

Multimeter with a 1272 MHz shows 1.77v, in the BIOS 1.8V; for 1300 1.91v, in the BIOS 1.94v, these results are stable in 24 / 7. DFI LT X48-T2R

[Jor3lBR]

Guys

Multimeter with a 1272 MHz shows 1.77v, in the BIOS 1.8V; for 1300 1.91v, in the BIOS 1.94v, these results are stable in 24 / 7. DFI LT X48-T2R

these sticks are magic! ad a DFI X38/48 to the mixture and you got a winner.

I heard the new beta bios really boosts memory speed have you tried it?

[high-gertz]

Jor3lBR

I was a beta BIOS X48ADA02 very upset, very much cut, compared with X48AD829, dispersing poor, had to go back.
If interested, please see my review G.SKILL F2-9600CL5D-4GBPI

http://people.overclockers.ru/highgertz/record1

[neo mike]

I have been trying for weeks to get this memory, newegg said 10/17/08, they never got it, i have tried memoryc, ncix, nobody has had it for weeks, COME ON G.SKILL GET THE WITH THE PROGRAM AND MAKE SOME MORE OF THIS STUFF, time to look for another memory company.

[zsamz_]

I have been trying for weeks to get this memory, newegg said 10/17/08, they never got it, i have tried memoryc, ncix, nobody has had it for weeks, COME ON G.SKILL GET THE WITH THE PROGRAM AND MAKE SOME MORE OF THIS STUFF, time to look for another memory company.

stop cryin if you want a set i'll sell ya mine
if i take out my x38 i wont sell em

[andressergio]

stop cryin if you want a set i'll sell ya mine
if i take out my x38 i wont sell em

bad bad zsamz sell them to me

[zsamz_]

bad bad zsamz sell them to me

newegg price is 300$
gimme 300$ its yours

[-n7-]

Jor3lBR

I was a beta BIOS X48ADA02 very upset, very much cut, compared with X48AD829, dispersing poor, had to go back.
If interested, please see my review G.SKILL F2-9600CL5D-4GBPI

http://people.overclockers.ru/highgertz/record1

Great stuff; thanx for removing the spreaders.

I'm a bit confused though...it's said this stuff is PSC, but it looks like what i've heard is ProMOS?

Here's the same type of IC (look at the pic) is said to be ProMOS.
Chaintech Apogee GT 2x2 GB DDR2-1066
http://www.xtremesystems.org/Forums/...02#post3170602

Here's some Transcend AxeRAM 2x1 GB DDR2-1200
http://www.xtremesystems.org/forums/...1&postcount=63
Same type of IC design.

So something's not right here.

Either this different looking IC is actually a higher end type of PSC that looks like what some say is ProMOS, or it's actually ProMOS?

Direct pics for comparing.

G.Skill 2x2 GB DDR2-1000 = PSC (thanx to Miravo)


Mushkin 2x2 GB DDR2-800 = PSC (thanx to t-break)


Transcend 2x2 GB DDR2-1066 = PSC (thanx to s e t h)


I have a ton of other pics of PSC on different kits; we all know what PSC looks like.

Chaintech Apogee GT 2x2 GB DDR2-1066 = ProMOS? (thanx to Miravo)


Transcend 2x1 GB DDR2-1200 = ? (thanx to nicepun)


G.Skill 2x2 GB DDR2-1200 = PSC? (thanx to high-gertz)


This "PSC" is a different IC layout than i am used to seeing in PSC...

Anyone know what the real deal is?

Because if this is PSC, then that Chaintech Miravo said was ProMOS is PSC, as is the Transcend @ DDR2-1200, which would indicate this is a significantly higher rated PSC IC than the normal ones.

[Xtreme Addict]

http://www.xtremesystems.org/Forums/...02#post3170602

ProMOS

http://www.xtremesystems.org/forums/...1&postcount=63

ProMOS




PowerChip



PowerChip




PowerChip



ProMOS

Transcend 2x1 GB DDR2-1200 = ? (thanx to nicepun)


ProMOS



ProMOS

I had two PC9600 G.skill PI (only 2 as I can't buy more in Europe at that moment, I am waiting for 3 sets about one month...) The first retail supply was PowerChip (the same as in PC8800 PI) and now is ProMOS in PC8800 and PC9600. This ProMOS is also awesome and can do about 1200 - 1300 what of I have seen till now. It's used in Mushkin XP2 PC8800 2x2 Kit ( my set does 1230 MHz stable if I remember correctly) and G.skill PI 8800 does about 1150 - 1190 (I tested 7 kits two weeks ago).

[neo mike]

$300 for your used memory you been overclocking and pumping high voltage into, no thanks will wait for new stuff for that price, thanks anyways.

[-n7-]

ProMOS

I had two PC9600 G.skill PI (only 2 as I can't buy more in Europe at that moment, I am waiting for 3 sets about one month...) The first retail supply was PowerChip (the same as in PC8800 PI) and now is ProMOS in PC8800 and PC9600. This ProMOS is also awesome and can do about 1200 - 1300 what of I have seen till now. It's used in Mushkin XP2 PC8800 2x2 Kit ( my set does 1230 MHz stable if I remember correctly) and G.skill PI 8800 does about 1150 - 1190 (I tested 7 kits two weeks ago).

Thanx very much for the info.

I kinda was wondering why this stuff was doing so much better than the normal PSC was.

So we have a new 2 GB DIMM champion, ProMOS

You wouldn't happen to have any pics of your findings with those other kits now would you?

[zsamz_]

$300 for your used memory you been overclocking and pumping high voltage into, no thanks will wait for new stuff for that price, thanks anyways.

i never went past 2.09v n they running only 1230mhz 2.06v@ 515fsb 24/7 24c
and they will be in the for sale section soon and cheap
i gettin a nahaleem itch
too bad you dont have 100+ posts

[neo mike]

Why do i need 100 post ? im interested in them, but not for $300, im tired of waiting for these things looking for other 4gb kits, but right price, i paypal you right now.